How to remove and install an axle shaft on 1988 Dodge Ramcharger?

Block the brake pedal in the up position, then raise the vehicle and support it securely with jackstands positioned under the frame rails. Disconnect the front driveshaft at the drive pinion yoke, and on the left side, disconnect the drag link from the steering knuckle. Next, disconnect the flexible brake line from the frame crossmember and plug the fittings. Remove the shock absorbers from the lower mounts and disconnect the sway bar from the tabs on the leaf spring plates. Remove the U-bolt retaining nuts and washers from the leaf spring mounting plates. For installation, reverse the removal process and ensure all bolts are tightened to the specified torque.

Genuine 1988 Dodge Ramcharger Axle Shaft

Car Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Axle Shafts found

View related parts
1988 Dodge Ramcharger Rear Drive Shaft
Part Number: 4137672
Product Specifications
- Other Name: R/Ax Drv-Finished; Axle Shaft
- Item Weight: 22.60 Pounds
- Item Dimensions: 33.7 x 7.4 x 7.5 inches
- Condition: New
- SKU: 4137672
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 1988 Dodge Ramcharger Submodels:
- 6 Cyl 3.7L, 6 Cyl 3.9L, 8 Cyl 5.2L, 8 Cyl 5.9L
View related parts
1988 Dodge Ramcharger Drive Shaft
Part Number: 4036682
Product Specifications
- Other Name: R/A Drive Right Dana #38378-3 ; Shaft, Drive
- Item Weight: 12.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4036682
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 1988 Dodge Ramcharger Submodels:
- 6 Cyl 3.7L, 6 Cyl 3.9L, 6 Cyl 5.9L Diesel, 8 Cyl 5.2L, 8 Cyl 5.9L, All Engines

1988 Dodge Ramcharger Axle Shaft

On our website, we proudly offer genuine 1988 Dodge Ramcharger Axle Shaft at the market's great competitive prices. We are confident that choosing brand new OEM 1988 Dodge Ramcharger Axle Shaft from our site will save you both trouble and money.

1988 Dodge Ramcharger Axle Shaft Parts Questions & Experts Answers

Q: How to remove and install an axle shaft on 1988 Dodge Ramcharger?
A: Block the brake pedal in the up position, then raise the vehicle and support it securely with jackstands positioned under the frame rails. Disconnect the front driveshaft at the drive pinion yoke, and on the left side, disconnect the drag link from the steering knuckle. Next, disconnect the flexible brake line from the frame crossmember and plug the fittings. Remove the shock absorbers from the lower mounts and disconnect the sway bar from the tabs on the leaf spring plates. Remove the U-bolt retaining nuts and washers from the leaf spring mounting plates. For installation, reverse the removal process and ensure all bolts are tightened to the specified torque.