How to remove and install a front crankshaft seal in 3.7L V6 engine on 2004 Jeep Liberty?

Delete the crankshaft pulley on the engine. Using a seal remover tool or an appropriately sized screwdriver ease out the seal from the cover to avoid damaging the seal bore as well as the crankshaft. One must not apply pressure that makes scratch, gouged, or distorted shape at the point where the seal experiences pressure because this will lead to oil leak. Scrape out the bore to remove any remaining seal material and rust or ANY OTHER FORM OF CORROSION, before placing the new seal in to the bore, ensuring that the side of the seal that contains the spring, is seated inside against the engine block. It is good to apply a small amount of oil on the circumference of the new seal, but should not be done heavily. Using seal driver or a large socket and hammer force the seal into the bore until it bottoms on the cover flange while making sure that the outside diameter of the socket matches the inside diameter of the seal. It is recommended to lubricate the seal lips with engine oil before bolt and reinstalling the crankshaft pulley The other process is the reversal of the above-stated procedure.

Genuine 2004 Jeep Liberty Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Crankshaft Seals found

View related parts
2004 Jeep Liberty Crankshaft Oil Seal
Part Number: 53021313AA
$10.45 MSRP: $15.00
You Save: $4.55 (31%)
ADD TO CART
Product Specifications
- Other Name: Seal Crankshaft Oil Front
- Item Weight: 1.30 Pounds
- Item Dimensions: 0.6 x 3.1 x 3.1 inches
- Condition: New
- SKU: 53021313AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Jeep Liberty Submodels:
- Limited Edition 2WD, Limited Edition 4WD, Limited JET Edition 2WD, Limited JET Edition 4WD, Renegade 2WD, Renegade 4WD, Sport 2WD, Sport 4WD | 6 Cyl 3.7L
View related parts
2004 Jeep Liberty Seal-Rear Main CRANKSHAFT
Part Number: 4621939AB
$27.96 MSRP: $40.20
You Save: $12.24 (31%)
ADD TO CART
Product Specifications
- Other Name: Seal Rear Main Crankshaft; Rear Main Seal, Rear Seal
- Item Weight: 0.40 Pounds
- Item Dimensions: 0.7 x 4.8 x 4.7 inches
- Condition: New
- SKU: 4621939AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Jeep Liberty Submodels:
- Limited Edition 4WD, Sport 2WD, Sport 4WD | 4 Cyl 2.4L
View related parts
2004 Jeep Liberty Seal-Front Main CRANKSHAFT
Part Number: 5072670AA
$24.41 MSRP: $35.25
You Save: $10.84 (31%)
ADD TO CART
Product Specifications
- Other Name: Seal Front Main Crankshaft
- Position: Front
- Replaced by: 5179633AA
- Item Weight: 0.30 Pounds
- Item Dimensions: 0.3 x 2.2 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5072670AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Liberty Submodels:
- Limited Edition 4WD, Sport 2WD, Sport 4WD | 4 Cyl 2.8L Diesel
View related parts
2004 Jeep Liberty Crankshaft Oil Seal
Part Number: 5066756AA
$91.52 MSRP: $93.20
You Save: $1.68 (2%)
ADD TO CART
Product Specifications
- Other Name: Seal Crankshaft Oil Rear; Rear Main Seal
- Item Weight: 0.80 Pounds
- Item Dimensions: 5.9 x 6.0 x 0.9 inches
- Condition: New
- SKU: 5066756AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Jeep Liberty Submodels:
- Limited Edition 4WD, Sport 2WD, Sport 4WD | 4 Cyl 2.8L Diesel
View related parts
2004 Jeep Liberty Seal-Front Main CRANKSHAFT
Part Number: 4667198
$16.31 MSRP: $23.35
You Save: $7.04 (31%)
Product Specifications
- Other Name: Seal Front Main Crankshaft; Front Cover Seal, Front Crank Seal, Front Seal
- Item Weight: 0.30 Pounds
- Item Dimensions: 0.5 x 2.0 x 2.0 inches
- Condition: New
- SKU: 4667198
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Jeep Liberty Submodels:
- Limited Edition 4WD, Sport 2WD, Sport 4WD | 4 Cyl 2.4L
View related parts
2004 Jeep Liberty Seal-CRANKSHAFT Bearing Oil
Part Number: 53020788
Product Specifications
- Other Name: Seal Crankshaft Bearing Oil
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.4 x 5.0 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53020788
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Jeep Liberty Submodels:
- Limited Edition 2WD, Limited Edition 4WD, Renegade 2WD, Renegade 4WD, Sport 2WD, Sport 4WD | 6 Cyl 3.7L

2004 Jeep Liberty Crankshaft Seal

On our website, we proudly offer genuine 2004 Jeep Liberty Crankshaft Seal at the market's great competitive prices. We are confident that choosing brand new OEM 2004 Jeep Liberty Crankshaft Seal from our site will save you both trouble and money.

2004 Jeep Liberty Crankshaft Seal Parts Questions & Experts Answers

Q: How to remove and install a front crankshaft seal in 3.7L V6 engine on 2004 Jeep Liberty?
A: Delete the crankshaft pulley on the engine. Using a seal remover tool or an appropriately sized screwdriver ease out the seal from the cover to avoid damaging the seal bore as well as the crankshaft. One must not apply pressure that makes scratch, gouged, or distorted shape at the point where the seal experiences pressure because this will lead to oil leak. Scrape out the bore to remove any remaining seal material and rust or ANY OTHER FORM OF CORROSION, before placing the new seal in to the bore, ensuring that the side of the seal that contains the spring, is seated inside against the engine block. It is good to apply a small amount of oil on the circumference of the new seal, but should not be done heavily. Using seal driver or a large socket and hammer force the seal into the bore until it bottoms on the cover flange while making sure that the outside diameter of the socket matches the inside diameter of the seal. It is recommended to lubricate the seal lips with engine oil before bolt and reinstalling the crankshaft pulley The other process is the reversal of the above-stated procedure.