What are the essential precautions for installing a new crankshaft seal in a 4.0L V6 engine on Jeep Liberty?

The rear crankshaft Crankshaft Seal and retainer are an assembly. When installing a new seal assembly, do not separate the seal protector from the crankshaft Crankshaft Seal before installation onto the engine, as damage to the seal lip will occur if the seal protector is removed. Begin by removing the engine oil pan. Lower the weight of the engine back onto the engine mounts. Next, remove the transmission. After that, remove the rear seal retaining bolts and then take off the seal retainer. Clean the crankshaft Crankshaft Seal and retainer surfaces. Mount special tool #8225 to the oil pan surface using the oil pan mounting bolts. Install the oil seal retainer over the end of the crankshaft and onto the engine block, firmly pressing the retainer into place to ensure it is seated against the special tool. Install the mounting bolt and tighten the bolts to the specified torque value. The remaining installation follows the reverse order of removal. Finally, refill the engine with oil.

Genuine Jeep Liberty Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Crankshaft Seals found

View related parts
Jeep Liberty Seal-Front Main CRANKSHAFT
Part Number: 4667198
$16.62 MSRP: $23.35
You Save: $6.73 (29%)
ADD TO CART
Product Specifications
- Other Name: Seal Front Main Crankshaft; Front Cover Seal, Front Crank Seal, Front Seal
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2005 Jeep Liberty | Limited Edition 4WD, Sport 2WD, Sport 4WD | 4 Cyl 2.4L
View related parts
Jeep Liberty Crankshaft Oil Seal
Part Number: 53021313AA
$10.45 MSRP: $15.00
You Save: $4.55 (31%)
ADD TO CART
Product Specifications
- Other Name: Seal Crankshaft Oil Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2012 Jeep Liberty | Limited Edition 2WD, Limited Edition 4WD, Limited JET Edition 2WD, Limited JET Edition 4WD, Renegade 2WD, Renegade 4WD, Sport 2WD, Sport 4WD | 6 Cyl 3.7L
View related parts
Jeep Liberty Crankshaft Oil Seal
Part Number: 53020788AB
$33.79 MSRP: $48.35
You Save: $14.56 (31%)
ADD TO CART
Product Specifications
- Other Name: Seal Crankshaft Oil Rear
- Replaces: 68045792AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2012 Jeep Liberty | Limited Edition 2WD, Limited Edition 4WD, Limited JET Edition 2WD, Limited JET Edition 4WD, Renegade 2WD, Renegade 4WD, Sport 2WD, Sport 4WD | 6 Cyl 3.7L
View related parts
Jeep Liberty Seal-Rear Main CRANKSHAFT
Part Number: 4621939AB
$27.96 MSRP: $40.20
You Save: $12.24 (31%)
ADD TO CART
Product Specifications
- Other Name: Seal Rear Main Crankshaft; Rear Main Seal, Rear Seal
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2005 Jeep Liberty | Limited Edition 4WD, Sport 2WD, Sport 4WD | 4 Cyl 2.4L
View related parts
Jeep Liberty Seal-Front Main CRANKSHAFT
Part Number: 5072670AA
$24.41 MSRP: $35.25
You Save: $10.84 (31%)
ADD TO CART
Product Specifications
- Other Name: Seal Front Main Crankshaft
- Position: Front
- Replaced by: 5179633AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2006 Jeep Liberty | Limited Edition 4WD, Sport 2WD, Sport 4WD | 4 Cyl 2.8L Diesel
View related parts
Jeep Liberty Crankshaft Oil Seal
Part Number: 5066756AA
$91.52 MSRP: $93.20
You Save: $1.68 (2%)
ADD TO CART
Product Specifications
- Other Name: Seal Crankshaft Oil Rear; Rear Main Seal
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2006 Jeep Liberty | Limited Edition 4WD, Sport 2WD, Sport 4WD | 4 Cyl 2.8L Diesel
View related parts
Jeep Liberty Crankshaft Oil Seal
Part Number: 68029523AA
$33.96 MSRP: $48.90
You Save: $14.94 (31%)
Product Specifications
- Other Name: Seal Crankshaft Oil Front; Front Crank Seal, Front Seal
- Replaces: 68147500AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2012 Jeep Liberty
View related parts
Jeep Liberty Seal-CRANKSHAFT Bearing Oil
Part Number: 53020788
Product Specifications
- Other Name: Seal Crankshaft Bearing Oil
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Jeep Liberty | Limited Edition 2WD, Limited Edition 4WD, Renegade 2WD, Renegade 4WD, Sport 2WD, Sport 4WD | 6 Cyl 3.7L
View related parts
Jeep Liberty Seal-CRANKSHAFT Bearing Oil
Part Number: 5073590AA
Product Specifications
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002 Jeep Liberty | Limited Edition 2WD, Limited Edition 4WD, Renegade 2WD, Renegade 4WD, Sport 2WD, Sport 4WD | 6 Cyl 3.7L

Jeep Liberty Crankshaft Seal

Jeep Liberty Crankshaft Seal is a front end part in the engine used to prohibit oil leakage of the crankcase. Made usually of metal and rubber this round seal is vital for ensuring proper functioning of the lubrication system in an engine to help cut down on friction and consequent wear on the parts moving within the engine chamber. A Jeep Liberty's Crankshaft Seal may deteriorate slowly with every passing mile and therefore high-mileage vehicles must pay special attention to their Crankshaft Seal as it might cause oil leakages. Identifying these signs is very crucial in terms of replacement so that the engine runs as it is required. While the basic design remains consistent, variations may exist across different Jeep Liberty models, but the primary function of the Crankshaft Seal remains the same: to enclose the oil within the crankcase in order to prevent its seepage and inevitably protect the integrity of the engine.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Liberty Crankshaft Seal at great affordable prices. Moreover, all genuine Jeep Liberty Crankshaft Seal come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Jeep Liberty Crankshaft Seal Parts Questions & Experts Answers

Crankshaft Oil Seal
53021313AA
Q: What are the essential precautions for installing a new crankshaft seal in a 4.0L V6 engine on Jeep Liberty?
A:
The rear crankshaft Crankshaft Seal and retainer are an assembly. When installing a new seal assembly, do not separate the seal protector from the crankshaft Crankshaft Seal before installation onto the engine, as damage to the seal lip will occur if the seal protector is removed. Begin by removing the engine Oil Pan. Lower the weight of the engine back onto the engine mounts. Next, remove the transmission. After that, remove the rear seal retaining bolts and then take off the seal retainer. Clean the crankshaft Crankshaft Seal and retainer surfaces. Mount special tool #8225 to the oil pan surface using the oil pan mounting bolts. Install the oil seal retainer over the end of the crankshaft and onto the engine block, firmly pressing the retainer into place to ensure it is seated against the special tool. Install the mounting bolt and tighten the bolts to the specified torque value. The remaining installation follows the reverse order of removal. Finally, refill the engine with oil.