How to replace crankshaft seal in four cylinder engine on 2008 Dodge Avenger?

Remove the crankshaft balancer. If a seal is fitted, it requires a screwdriver or hook tool to remove it without damaging the oil pump cover bore or the crankshaft's nose and sealing surface. Another way is to drill holes on both sides and insert self tapping screws when used with a pair of pliers, the seal can be unscrewed without prying. If the seal is being replaced while the timing chain cover is off, the cover should be supported on two pieces of wood and the seal should be driven from back using a hammer and punch in a manner which will not scratch or distort the area where the seal fits so as to cause leakage. Using the clean engine oil or preferably the multi-purpose grease apply it on the outer rim of the new seal and then insert it into the cover with the lip facing inside then put a large socket on it and hit it with a hammer until it is firmly in its place and at the correct depth. If a large socket is not possible, then a piece of pipe, can be used instead. Look for wear and tear signs on the surface of the balancer hub, in particular, grooving from the constant contact with the seal; if found, the balancer will have to be changed. Coat the balancer hub with clean engine oil and then, fit the crankshaft balancer, and the rest will follow this process in the reverse manner.

Genuine 2008 Dodge Avenger Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Crankshaft Seals found

View related parts
2008 Dodge Avenger RETAINER-CRANKSHAFT Rear Oil
Part Number: 4663870AB
$115.88 MSRP: $174.00
You Save: $58.12 (34%)
ADD TO CART
Product Specifications
- Other Name: RETAINER And Seal Crankshaft Rear Oil
- Position: Rear
- Replaced by: 4663870AC
- Item Weight: 1.00 Pounds
- Item Dimensions: 1.1 x 10.3 x 13.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663870AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Avenger Submodels:
- R/T AWD, R/T FWD, SE, SXT | 6 Cyl 3.5L
View related parts
2008 Dodge Avenger Crankshaft Oil Seal
Part Number: 4663618
$18.99 MSRP: $29.95
You Save: $10.96 (37%)
ADD TO CART
Product Specifications
- Other Name: Seal Front Main Crankshaft
- Item Weight: 0.30 Pounds
- Item Dimensions: 0.2 x 2.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663618
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Avenger Submodels:
- Express, Heat, R/T FWD, SE, SXT | 6 Cyl 2.7L
View related parts
2008 Dodge Avenger Crankshaft Oil Seal
Part Number: 4792317AB
$17.07 MSRP: $26.70
You Save: $9.63 (37%)
ADD TO CART
Product Specifications
- Other Name: Seal Crankshaft Oil Front
- Replaces: 4273275, 4792317
- Item Weight: 0.40 Pounds
- Item Dimensions: 0.6 x 1.9 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792317AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Avenger Submodels:
- Heat, R/T AWD, R/T FWD, SE, SXT | 6 Cyl 3.5L
View related parts
2008 Dodge Avenger Crankshaft Oil Seal
Part Number: 2142125000
$3.79 MSRP: $5.45
You Save: $1.66 (31%)
ADD TO CART
Product Specifications
- Other Name: Seal Crankshaft Oil Front
- Item Weight: 0.30 Pounds
- Item Dimensions: 0.5 x 2.4 x 2.5 inches
- Condition: New
- SKU: 2142125000
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Dodge Avenger Submodels:
- Express, Heat, LUX, Mainstreet, R/T FWD, SE, SXT | 4 Cyl 2.4L
View related parts
2008 Dodge Avenger Crankshaft Oil Seal
Part Number: 2144325000
$22.14 MSRP: $31.70
You Save: $9.56 (31%)
ADD TO CART
Product Specifications
- Other Name: Seal Crankshaft Oil Rear
- Replaced by: 5047167AA
- Item Weight: 0.40 Pounds
- Item Dimensions: 0.6 x 4.4 x 4.4 inches
- Condition: New
- SKU: 2144325000
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Avenger Submodels:
- SE, SXT | 4 Cyl 2.4L
View related parts
2008 Dodge Avenger Cover-CRANKSHAFT Rear Oil
Part Number: 5175829AA
$101.21 MSRP: $211.00
You Save: $109.79 (53%)
ADD TO CART
Product Specifications
- Other Name: RETAINER And Seal Crankshaft Rear Oil
- Replaced by: 5175829AB
- Item Weight: 1.20 Pounds
- Item Dimensions: 12.4 x 7.3 x 2.2 inches
- Condition: New
- SKU: 5175829AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Avenger Submodels:
- SE, SXT | 6 Cyl 2.7L
View related parts
2008 Dodge Avenger Seal-CRANKSHAFT Rear Oil
Part Number: 68000669AA
$90.18 MSRP: $134.00
You Save: $43.82 (33%)
ADD TO CART
Product Specifications
- Other Name: RETAINER And Seal Crankshaft Rear Oil
- Item Weight: 0.80 Pounds
- Item Dimensions: 6.7 x 5.6 x 0.8 inches
- Condition: New
- SKU: 68000669AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Dodge Avenger Submodels:
- Express, Heat, R/T FWD, SE, SXT
View related parts
2008 Dodge Avenger Crankshaft Oil Seal
Part Number: 68000666AA
Product Specifications
- Other Name: Seal Crankshaft Oil Front
- Replaces: 68001135AA
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.1 x 2.0 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68000666AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Avenger Submodels:
- Express, Heat, R/T FWD, SE, SXT

2008 Dodge Avenger Crankshaft Seal

On our website, we proudly offer genuine 2008 Dodge Avenger Crankshaft Seal at the market's great competitive prices. We are confident that choosing brand new OEM 2008 Dodge Avenger Crankshaft Seal from our site will save you both trouble and money.

2008 Dodge Avenger Crankshaft Seal Parts Questions & Experts Answers

Q: How to replace crankshaft seal in four cylinder engine on 2008 Dodge Avenger?
A: Remove the crankshaft balancer. If a seal is fitted, it requires a screwdriver or hook tool to remove it without damaging the oil pump cover bore or the crankshaft's nose and sealing surface. Another way is to drill holes on both sides and insert self tapping screws when used with a pair of pliers, the seal can be unscrewed without prying. If the seal is being replaced while the timing chain cover is off, the cover should be supported on two pieces of wood and the seal should be driven from back using a hammer and punch in a manner which will not scratch or distort the area where the seal fits so as to cause leakage. Using the clean engine oil or preferably the multi-purpose grease apply it on the outer rim of the new seal and then insert it into the cover with the lip facing inside then put a large socket on it and hit it with a hammer until it is firmly in its place and at the correct depth. If a large socket is not possible, then a piece of pipe, can be used instead. Look for wear and tear signs on the surface of the balancer hub, in particular, grooving from the constant contact with the seal; if found, the balancer will have to be changed. Coat the balancer hub with clean engine oil and then, fit the crankshaft balancer, and the rest will follow this process in the reverse manner.

Related 2008 Dodge Avenger Parts

Alternate Year Models

2007 Dodge Avenger Crankshaft Seal 2009 Dodge Avenger Crankshaft Seal