How to remove and install a crankshaft seal in four cylinder engine on 2013 Dodge Avenger?

Remove the transaxle and then the driveplate. Use a screwdriver wrapped with tape to pry out the Crankshaft Seal, being careful not to gouge or nick the housing. Lubricate the crankshaft seal journal and the lip of the new Crankshaft Seal with multi-purpose grease. Install the Crankshaft Seal with the seal lip toward the engine and the dust seal toward the transaxle. Tap the Crankshaft Seal into place using a seal driver to ensure it doesn't become tilted. Install the Crankshaft Seal so that its rear edge is flush with the face of the engine block, or up to 0.020 inch recessed. The remainder of installation is the reverse of removal.

Genuine 2013 Dodge Avenger Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Crankshaft Seals found

View related parts
2013 Dodge Avenger Crankshaft Oil Seal
Part Number: 68079589AA
$19.81 MSRP: $28.35
You Save: $8.54 (31%)
ADD TO CART
Product Specifications
- Other Name: Seal Crankshaft Oil Front
- Replaces: 5184541AB
- Item Weight: 0.30 Pounds
- Item Dimensions: 0.6 x 2.9 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68079589AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2013 Dodge Avenger Submodels:
- Express, LUX, Mainstreet, R/T FWD, SE, SXT, SXT Plus | 6 Cyl 3.6L
View related parts
2013 Dodge Avenger Cover-CRANKSHAFT Rear Oil
Part Number: 5184285AG
$99.00 MSRP: $147.00
You Save: $48.00 (33%)
ADD TO CART
Product Specifications
- Other Name: RETAINER And Seal Crankshaft Rear Oil
- Position: Rear
- Replaced by: 68223854AA
- Item Weight: 1.60 Pounds
- Item Dimensions: 4.4 x 8.2 x 10.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5184285AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2013 Dodge Avenger Submodels:
- R/T FWD, SE, SXT | 6 Cyl 3.6L
View related parts
2013 Dodge Avenger Crankshaft Oil Seal
Part Number: 5047167AA
$22.14 MSRP: $31.70
You Save: $9.56 (31%)
ADD TO CART
Product Specifications
- Other Name: Seal Crankshaft Oil Rear; Rear Main Seal, Rear Seal
- Replaces: 2144325000
- Item Weight: 0.40 Pounds
- Item Dimensions: 0.7 x 4.6 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5047167AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2013 Dodge Avenger Submodels:
- Express, Heat, LUX, Mainstreet, R/T FWD, SE, SXT | 4 Cyl 2.4L
View related parts
2013 Dodge Avenger Crankshaft Oil Seal
Part Number: 2142125000
$3.79 MSRP: $5.45
You Save: $1.66 (31%)
ADD TO CART
Product Specifications
- Other Name: Seal Crankshaft Oil Front
- Item Weight: 0.30 Pounds
- Item Dimensions: 0.5 x 2.4 x 2.5 inches
- Condition: New
- SKU: 2142125000
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2013 Dodge Avenger Submodels:
- Express, Heat, LUX, Mainstreet, R/T FWD, SE, SXT | 4 Cyl 2.4L

2013 Dodge Avenger Crankshaft Seal

On our website, we proudly offer genuine 2013 Dodge Avenger Crankshaft Seal at the market's great competitive prices. We are confident that choosing brand new OEM 2013 Dodge Avenger Crankshaft Seal from our site will save you both trouble and money.

2013 Dodge Avenger Crankshaft Seal Parts Questions & Experts Answers

Q: How to remove and install a crankshaft seal in four cylinder engine on 2013 Dodge Avenger?
A: Remove the transaxle and then the driveplate. Use a screwdriver wrapped with tape to pry out the Crankshaft Seal, being careful not to gouge or nick the housing. Lubricate the crankshaft seal journal and the lip of the new Crankshaft Seal with multi-purpose grease. Install the Crankshaft Seal with the seal lip toward the engine and the dust seal toward the transaxle. Tap the Crankshaft Seal into place using a seal driver to ensure it doesn't become tilted. Install the Crankshaft Seal so that its rear edge is flush with the face of the engine block, or up to 0.020 inch recessed. The remainder of installation is the reverse of removal.