Genuine Chrysler Imperial A/C Condenser

Chrysler Imperial A/C Condenser Parts Questions & Answers

• Condenser
  4728738
  Q: How Should the Condenser Be Replaced?

  A: The filter-drier/receiver-drier should be replaced whenever the condenser is replaced. Have the system discharged. Remove the battery. Drain the cooling system. Remove the radiator. Disconnect the refrigerant lines from the condenser. Lift the condenser out of the vehicle and plug the lines to keep dirt and moisture out. Inspect the rubber insulator pads on which the condenser sits, Replace them if they're dried or cracked. If the original condenser will be reinstalled, store it with the line fittings on top to prevent oil from draining out. If a new condenser is being installed, pour one ounce of refrigerant oil into it prior to installation. Reinstall the components in the reverse order of removal. Be sure the rubber pads are in place under the condenser. Have the system evacuated, recharged and leak tested by the shop that discharged it.