How do you remove and install an antenna on Chrysler Imperial?

Disconnect the negative battery cable, then work under the dash to unplug the antenna cable. Use a small open-end wrench to unscrew the antenna mast, followed by removing the cap nut and lifting off the upper adapter and gasket, taking care to avoid scratching the fender with needle-nose pliers. Next, work under the vehicle to remove the three plastic rivets from the rear edge of the inner fender splash shield and pull the shield away for access to the antenna. Detach the antenna from the fender and remove it from the vehicle, with installation being the reverse of the removal process.

Genuine Chrysler Imperial Antenna

Radio Antenna

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Antennas found

View related parts
Chrysler Imperial Mast Pkg-Power Antenna
Part Number: 4494010
Product Specifications
- Other Name: Antenna, Power; Antenna, Mast, Power Mast
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990-1993 Chrysler Imperial | Base | 6 Cyl 3.0L, 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Chrysler Imperial Mast-Antenna
Part Number: 4469016
Product Specifications
- Other Name: Mast, Antenna
- Replaced by: 68040423AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990-1993 Chrysler Imperial | Base | 6 Cyl 3.0L, 6 Cyl 3.3L, 6 Cyl 3.8L

Chrysler Imperial Antenna

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Imperial Antenna at great affordable prices. Moreover, all genuine Chrysler Imperial Antenna come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler Imperial Antenna Parts Questions & Experts Answers

Mast-Antenna
4469016
Q: How do you remove and install an antenna on Chrysler Imperial?
A:
Disconnect the negative battery cable, then work under the dash to unplug the antenna cable. Use a small open-end wrench to unscrew the antenna mast, followed by removing the cap nut and lifting off the upper adapter and gasket, taking care to avoid scratching the fender with needle-nose pliers. Next, work under the vehicle to remove the three plastic rivets from the rear edge of the inner fender splash shield and pull the shield away for access to the antenna. Detach the antenna from the fender and remove it from the vehicle, with installation being the reverse of the removal process.

Related Chrysler Imperial Parts

Browse by Year

1993 Antenna 1992 Antenna 1991 Antenna 1990 Antenna