My Garage
My Account
Cart
Genuine Chrysler Imperial Window Regulator
Electric Power Window Regulator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Window Regulator found
Chrysler Imperial Window Regulator
Chrysler Imperial automobiles come with Window Regulator which has the simple role of rolling up and down the windows for passengers' convenience. A few of these regulators can be motorized while others are hand cranked, depending on the model of the equipment. Chrysler Imperial has incorporated the scissor type and the cable type of designs in their window regulators at different times, whereby the scissor type controls the movement of the windows using a scissor like extension while the cable type uses cables to control the movement of the windows. Being one of the most rampant parts on any vehicle the Window Regulator is bound to degrade leading to some common problems like windows getting jammed. It becomes necessary to replace these faulty regulators with good ones which are of automotive standard and fit into the models of Chrysler Imperial as the original units. Besides regaining window operational capacity, this replacement improves the general robustness and reliability of the vehicle window system.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Imperial Window Regulator at great affordable prices. Moreover, all genuine Chrysler Imperial Window Regulator come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Chrysler Imperial Window Regulator Parts Questions & Experts Answers
- Q: How do you remove and install the door trim panel and window regulator on Chrysler Imperial?A:Remove the door trim panel and watershield. Raise the glass to within one inch of the top of the door opening, then tape it in place. For power window models, disconnect the negative battery cable. Remove the regulator bolts and detach the lift arm roller from the glass. Rotate the regulator and lift it out through the opening in the door. For C and Y body, remove the exterior mirror trim cover, door trim molding, and window glass. Remove the nut holding the cable retainer to the door, then slip the cables out from behind the retainer. For power window models, detach the cable retainers from above the speakers. Remove the retaining bolts and nuts, detach the regulator, and lift it out of the door. For the rear door on A body, raise the window glass up six inches into the window opening, then grasp the glass securely and pull the front edge up sharply to detach it from the lower glass guide. Remove the window regulator-to-door bolts and slide the lift arm roller out of the window lift channel. Raise the glass to within six inches of the top of the door opening and tape it in place. Rotate the regulator and lift it out through the opening in the door. For C and Y body, remove the bolts from the regulator, slide the lift arm roller from the lift plate channel, then separate the regulator and lift it out of the door. Installation is the reverse of removal in all cases.
Related Chrysler Imperial Parts
Chrysler Imperial Mirror Switch
Chrysler Imperial Wiper Blade
Chrysler Imperial Power Window Switch
Chrysler Imperial Seat Switch
Chrysler Imperial Window Motor