How to remove and install an Axle Shaft along with hub bearing assemblies on Chrysler Laser?

First of all, to remove the front hub bearing cap and related parts, loosen the axle nut with brakes applied, then lift the vehicle and remove the front wheel, axle nut, and washer. Remove the speedometer gear before the right axle. Detach the steering knuckle from the ball joint and separate the axle shaft from the hub. Remove the axle shaft from the differential. If the vehicle needs to be moved, secure the bearings with a bolt and nuts. To reinstall, clean and grease the CV joint and seal, insert the axle shaft into the transaxle, and reattach the ball joint to the steering knuckle.

Genuine Chrysler Laser Axle Shaft

Car Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Axle Shafts found

View related parts
Chrysler Laser Drive Shaft, Right
Part Number: R2073602
Product Specifications
- Other Name: Shaft, Drive, Right - W/2.2 Efi (A.C.I.)
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1985-1986 Chrysler Laser | 4 Cyl 2.2L, 4 Cyl 2.5L
View related parts
Chrysler Laser Front Wheel Drive INTE
Part Number: 5212928
Product Specifications
- Other Name: Shaft, Frt. Whl. Dr. Inner (w/Turbo)
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1985-1986 Chrysler Laser | 4 Cyl 2.2L, 4 Cyl 2.5L

Chrysler Laser Axle Shaft

The Axle Shaft in Chrysler Laser automobiles transmits torque from the differential through to the wheels so that the wheels are able to travel in different angles for enhanced grip when turning. Usually made of long-lasting steel material, these axle shafts can take much of the pressure in driving and ensures that the wheels of the vehicle are correctly positioned when they are being steered. Chrysler Laser models employ halfshafts as their major component where the two ends are splined: one as a coupling with the differential and the other being coupled to the wheel hub. This design ensures output power delivery in automotive with independent suspensions. Over the years, variations in axle shaft configurations may have been employed, but the primary function remains consistent: for load bearing as well as provision of proper traction of the wheels on the ground. Maintenance of the equipment is still required because worn out parts compromises the performance of the machine through issues such as noisy and vibrating operations.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Laser Axle Shaft at great affordable prices. Moreover, all genuine Chrysler Laser Axle Shaft come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler Laser Axle Shaft Parts Questions & Experts Answers

Front Wheel Drive INTE
5212928
Q: How to remove and install an Axle Shaft along with hub bearing assemblies on Chrysler Laser?
A:
First of all, to remove the front hub bearing cap and related parts, loosen the axle nut with brakes applied, then lift the vehicle and remove the front wheel, axle nut, and washer. Remove the speedometer gear before the right axle. Detach the steering knuckle from the ball joint and separate the axle shaft from the hub. Remove the axle shaft from the differential. If the vehicle needs to be moved, secure the bearings with a bolt and nuts. To reinstall, clean and grease the CV Joint and seal, insert the axle shaft into the transaxle, and reattach the ball joint to the steering knuckle.