How to Replace a Wheel Stud for the Chrysler PT Cruiser?

Loosen the wheel lug nuts, raise the vehicle and support it securely on jackstands. Remove the wheel. Remove the brake disc or drum. Install a lug nut part way onto the stud being replaced. Push the stud out of the hub flange with a press tool. Insert the new stud into the hub flange from the back side and install some flat washers and a lug nut on the stud. Tighten the lug nut until the stud is seated in the flange. Reinstall the brake drum or disc. Install the wheel and lug nuts. Lower the vehicle and tighten the lug nuts to the torque.

Genuine Chrysler PT Cruiser Wheel Stud

Rim Wheel Stud

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

2 Wheel Studs found

View related parts
Chrysler PT Cruiser Wheel Stud
Part Number: 5204272
- Other Name: Stud-Wheel
- Replaced by: 5204272AB
$13.79 MSRP: $20.40
You Save: $6.61 (33%)

Add to Cart
More Info
Fits the following Vehicles:
2001-2008 Chrysler PT Cruiser | Base, Base Convertible, GT, GT Convertible, Limited, LX, Touring, Touring Convertible | 4 Cyl 2.4L
Less Info
View related parts
Chrysler PT Cruiser Wheel Stud
Part Number: 5204272AB
- Other Name: Stud-Wheel; Stud
- Replaces: 5204272
$13.79 MSRP: $20.40
You Save: $6.61 (33%)

Add to Cart
More Info
Fits the following Vehicles:
2001-2010 Chrysler PT Cruiser | Base, Base Convertible, Classic, GT, GT Convertible, LX, Limited, Touring, Touring Convertible | 4 Cyl 2.4L
Less Info

Chrysler PT Cruiser Wheel Stud Parts Questions & Answers

Wheel Stud
5204272
Q: How to Replace a Wheel Stud for the Chrysler PT Cruiser?
A: Loosen the wheel lug nuts, raise the vehicle and support it securely on jackstands. Remove the wheel. Remove the brake disc or drum. Install a lug nut part way onto the stud being replaced. Push the stud out of the hub flange with a press tool. Insert the new stud into the hub flange from the back side and install some flat washers and a lug nut on the stud. Tighten the lug nut until the stud is seated in the flange. Reinstall the brake drum or disc. Install the wheel and lug nuts. Lower the vehicle and tighten the lug nuts to the torque.