Genuine Chrysler Sebring Tie Rod Bushing

Suspension Tie Rod End Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Tie Rod Bushings found

View related parts
Chrysler Sebring Steering Gear Bushing
Part Number: 4616919
Product Specifications
- Other Name: BUSHING Steering Gear; Gear Assembly Bushing, Mount Bushing
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-1999 Chrysler Sebring | JX, JXi | 4 Cyl 2.0L, 4 Cyl 2.4L, 6 Cyl 2.5L
View related parts
Chrysler Sebring Steering Gear Bushing
Part Number: 4764407AA
Product Specifications
- Other Name: BUSHING Steering Gear
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chrysler Sebring | Base Convertible, Base Sedan, GTC Convertible, Limited Convertible, Limited Sedan, Touring Convertible, Touring Sedan, TSI Sedan | 4 Cyl 2.4L, 6 Cyl 2.7L
View related parts
Chrysler Sebring Steering Gear Bushing
Part Number: MR519041
Product Specifications
- Other Name: BUSHING Steering Gear; Gear Assembly Bushing
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base, Limited, LX, LXi | 4 Cyl 2.4L, 6 Cyl 3.0L
View related parts
Chrysler Sebring Steering Gear Bushing
Part Number: MR519056
Product Specifications
- Other Name: BUSHING Steering Gear; Bushing
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base, Limited, LX, LXi | 4 Cyl 2.4L, 6 Cyl 3.0L
View related parts
Chrysler Sebring INSULATOR-Steering Gear
Part Number: MR491968
Product Specifications
- Other Name: ISOLATOR Steering Gear; Gear Assembly Insulator
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base, LX | 4 Cyl 2.4L
View related parts
Chrysler Sebring INSULATOR-Steering Gear
Part Number: MR491123
Product Specifications
- Other Name: ISOLATOR Steering Gear; Gear Assembly Insulator
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Limited, LX, LXi | 6 Cyl 3.0L
View related parts
Chrysler Sebring Steering Gear Bushing
Part Number: 4616918
Product Specifications
- Other Name: BUSHING Steering Gear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2004 Chrysler Sebring | Base Convertible, Base Sedan, GTC Convertible, JX, JXi, Limited Convertible, Limited Sedan, LX Convertible, LX Sedan, LXi Convertible, LXi Sedan, Touring Convertible, Touring Sedan | 4 Cyl 2.0L, 4 Cyl 2.4L, 6 Cyl 2.5L, 6 Cyl 2.7L
View related parts
Chrysler Sebring ISOLATOR-Steering Gear
Part Number: 4766039AB
Product Specifications
- Other Name: ISOLATOR Steering Gear; Isolator
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Limited Convertible, LX Convertible, Touring Convertible | 4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L

Chrysler Sebring Tie Rod Bushing

Chrysler Sebring Tie Rod Bushing helps the front suspension flex more precisely, providing sharper steering response while eliminating metal grind and wheel shake. This small part, which probably goes unnoticed during repairs, performs quite an important function. The Tie Rod Bushing sits between the steering rack and knuckle on every Chrysler built Sebring coupe, sedan, and convertible. It keeps all of those components in alignment while soaking up the vibration of rough pavement. The Tie Rod Bushing provides a solid clamp and threaded fit to keep the rod in place, allowing drivers to change lanes and take tight corners with confidence, a clear advantage that enhances the part's long-term reliability. This component fits all years, allowing any Chrysler model of the Sebring to retain factory control without searching for other hardware. A new Tie Rod Bushing will replace one that is worn out. This will immediately restore straight tracking. Additionally, it will stop wandering that can transfer stress to ball joints and tires. As a result, this will improve efficiency and safety. The Tie Rod Bushing is made of high-density rubber, which enables it to endure and bend through thousands of pushing and pulling motions without first misaligning. Owners enjoy that the Tie Rod Bushing has been designed for the Chrysler badge alone, meaning there is no guesswork for any Sebring generation. The part fits either your Sebring's original 2.0L powertrain or later 3.0L powertrain. Let the Sebring move as lightly in the city. A speedy visual inspection of Chrysler steering systems for cracks and torn boots keeps the system healthy. The same specification is shared by all LX, LXi, JX, JXi, and Limited trims. Routine care of the Tie Rod Bushing has helped Chrysler loyalists to hail this unsung hero for delivering mighty performance in unassuming packaging.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Sebring Tie Rod Bushing at great affordable prices. Moreover, all genuine Chrysler Sebring Tie Rod Bushing come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Related Chrysler Sebring Parts

Browse by Year

2010 Tie Rod Bushing 2009 Tie Rod Bushing 2008 Tie Rod Bushing 2007 Tie Rod Bushing 2006 Tie Rod Bushing 2005 Tie Rod Bushing 2004 Tie Rod Bushing 2003 Tie Rod Bushing 2002 Tie Rod Bushing 2001 Tie Rod Bushing 2000 Tie Rod Bushing 1999 Tie Rod Bushing 1998 Tie Rod Bushing 1997 Tie Rod Bushing 1996 Tie Rod Bushing