How to remove the Fuel Level Sensor, Fuel Pressure Regulator, and Fuel Pump Assembly on Chrysler Town & Country?

To replace the fuel pump/fuel pressure regulator/Fuel Level Sensor, start by relieving the system fuel pressure and disconnecting the negative battery terminal. Then, remove the fuel tank and disconnect the fuel delivery line quick-connect fitting and electrical connector from the assembly. Before removing the assembly, make alignment marks on the mounting flange and fuel tank for correct realignment during installation. Loosen the locknut securing the assembly using a brass punch and hammer, and carefully lift it from the fuel tank, being mindful of the float arm and fuel pump inlet strainer. Inspect the inlet strainer and clean or replace if necessary. Finally, reinstall the assembly and tighten the locknut securely.

Genuine Chrysler Town & Country Fuel Pump

Gas Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Fuel Pumps found

View related parts
Chrysler Town & Country Fuel Pump/Level Module Kit
Part Number: 5101830AA
$286.56 MSRP: $429.00
You Save: $142.44 (34%)
ADD TO CART
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit
- Replaced by: 5101830AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Chrysler Town & Country | Base, EL, LX FWD, LXi FWD | 6 Cyl 3.3L
View related parts
Chrysler Town & Country Fuel Pump/Level Module Kit
Part Number: 5096149AA
$230.95 MSRP: $340.00
You Save: $109.05 (33%)
ADD TO CART
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit
- Replaced by: RL096149AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Chrysler Town & Country | Base, EL, EX, Limited AWD, Limited FWD, LX AWD, LX FWD, LXi AWD, LXi FWD | 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Chrysler Town & Country Aip Electronics Premium Complete Fuel Pump Assembly Compatible Replacement
Part Number: 5140813AC
$293.28 MSRP: $434.00
You Save: $140.72 (33%)
ADD TO CART
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit
- Replaced by: 5140813AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chrysler Town & Country
View related parts
Chrysler Town & Country Fuel Pump/Level Module Kit
Part Number: 5127562AC
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit
- Replaced by: 5127562AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chrysler Town & Country | Base | 6 Cyl 3.3L
View related parts
Chrysler Town & Country Fuel Pump/Level Module Kit
Part Number: R5101830AB
Product Specifications
- Other Name: Module Kit Fuel Pump/Level Unit
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Chrysler Town & Country | Base, EL, LX FWD, LXi FWD | 6 Cyl 3.3L
View related parts
Chrysler Town & Country Fuel Pump
Part Number: R4682761
Product Specifications
- Other Name: Module, w/Level Unit
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1995 Chrysler Town & Country | Base AWD, Base FWD | 6 Cyl 3.8L

Chrysler Town & Country Fuel Pump

It is a fact that the Fuel Pump is one of the key components in any vehicle since it transfers fuel from the tank to the engine for combustion. It functions through delivering fuel to either the carburetor or the fuel injection system, according to the kind of engines. Chrysler Town & Country cars mostly use electric fuel pump for the fuel injection system, and these are usually located inside the fuel tank while the older models that used carburetor has mechanical fuel pump situated outside. For many years, Chrysler Town & Country has undergone improvements from its mechanical fuel pumps, which have less pressure as compared to the electric ones with high power in its performance, and reliability. These electric pumps are governed by electronic control units (ECUs) for purpose of fuel requirements. This paper discusses how Fuel Pump technology in Chrysler Town & Country automobiles has improved over the years to meet the modern challenging driving conditions the engine performance and efficiency.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Town & Country Fuel Pump at great affordable prices. Moreover, all genuine Chrysler Town & Country Fuel Pump come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler Town & Country Fuel Pump Parts Questions & Experts Answers

Fuel Pump/Level Module Kit
5096149AA
Q: How to remove the Fuel Level Sensor, Fuel Pressure Regulator, and Fuel Pump Assembly on Chrysler Town & Country?
A:
To replace the fuel pump/fuel pressure regulator/Fuel Level Sensor, start by relieving the system fuel pressure and disconnecting the negative battery terminal. Then, remove the Fuel Tank and disconnect the fuel delivery line quick-connect fitting and electrical connector from the assembly. Before removing the assembly, make alignment marks on the mounting flange and fuel tank for correct realignment during installation. Loosen the locknut securing the assembly using a brass punch and hammer, and carefully lift it from the fuel tank, being mindful of the float arm and fuel pump inlet strainer. Inspect the inlet strainer and clean or replace if necessary. Finally, reinstall the assembly and tighten the locknut securely.