How to service the transaxle oil cooler and air conditioning condenser on Chrysler Town & Country?

On the later models, the transaxle oil cooler and the air conditioning condenser are interconnected and hence are serviced as a single unit. First of all, pull the connector off the negative terminal of the battery. Next replace the rear and then raise the front of the vehicle and place it on jackstands. Take off the radiator and position a drain pan beneath the oil cooler line joints to avoid looking at dropped transaxle oil. Remove the transaxle oil cooler line fittings you have to first take out the covers of clips and then nut or circlip that is located in the slots of the flange. Screw the lines to shut them and inform that when the oil cooler lines are removed then it is advised to fit new hoses since the connection might have leaked had it not been disconnected. Unbolt the transaxle oil cooler and get it out of the way. If this cooler was taken off to be flushed due to a transaxle failure, get it flushed by a dealer service department, or a transaxle shop since some special tools are required in flushing. Installation is the vice-versa of removal and includes making assurance that new transaxle fluid lines are fitted. Last of all, locate the transaxle fluid and check for the fluid level and if needed add some amount of the fluid.

Genuine Chrysler Town & Country Oil Cooler

Engine Oil Cooler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Oil Coolers found

View related parts
Chrysler Town & Country Engine Oil Cooler
Part Number: 4892420AA
$97.31 MSRP: $146.00
You Save: $48.69 (34%)
ADD TO CART
Product Specifications
- Other Name: Cooler-Engine Oil; Oil Cooler
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chrysler Town & Country | Limited, LX, Touring, Touring Plus | 6 Cyl 4.0L
View related parts
Chrysler Town & Country Engine Oil Cooler
Part Number: 4892313AA
$147.38 MSRP: $220.00
You Save: $72.62 (34%)
ADD TO CART
Product Specifications
- Other Name: Cooler-Engine Oil; Oil Cooler
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chrysler Town & Country | Limited, Touring | 6 Cyl 4.0L
View related parts
Chrysler Town & Country Transmission Oil Cooler
Part Number: 5016794AA
$130.99
ADD TO CART
Product Specifications
- Other Name: Cooler-Auxiliary Oil ; Cooler Auxiliary Oil Contains Inlet And Outlet Tubes, Protector Caps And Seals; Transmission Cooler
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999 Chrysler Town & Country | Limited FWD, LX FWD, SX | 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Chrysler Town & Country Engine Oil Cooler
Part Number: 68035488AA
Product Specifications
- Other Name: Cooler-Engine Oil
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2013 Chrysler Town & Country | Limited, LX, Touring, Touring Plus
View related parts
Chrysler Town & Country Transmission Oil-Fluid Cooler
Part Number: 4644951
Product Specifications
- Other Name: Cooler-Transmission Oil; Oil Cooler Assembly, Transmission Cooler
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1995 Chrysler Town & Country | Base AWD, Base FWD | 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Chrysler Town & Country Engine Oil Cooler
Part Number: 4694338AC
Product Specifications
- Other Name: Cooler-Engine Oil
- Replaced by: 4694338AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2010 Chrysler Town & Country | Base, EL, EX, Limited, Limited AWD, Limited FWD, LX, LX AWD, LX FWD, LXi AWD, LXi FWD, Touring, Touring AWD, Touring FWD, Touring Plus | 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Chrysler Town & Country Engine Oil Cooler
Part Number: 4694338
Product Specifications
- Other Name: Cooler-Engine Oil
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Town & Country | Limited AWD, Limited FWD, LX AWD, LX FWD, LX Long Wheelbase AWD, LX Long Wheelbase FWD, LX Short Wheelbase FWD, LXi AWD, LXi FWD, SX | 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Chrysler Town & Country Transmission Cooler Assembly
Part Number: 4809272AD
Product Specifications
- Other Name: Cooler-Oil; Transmission Cooler
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Chrysler Town & Country | Base, EL, EX, Limited AWD, Limited FWD, LX AWD, LX FWD, LXi AWD, LXi FWD | 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Chrysler Town & Country Transmission Cooler Assembly
Part Number: 4809271AD
Product Specifications
- Other Name: Cooler-Oil; Transmission Cooler
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004 Chrysler Town & Country | Base, EL, EX, Limited AWD, Limited FWD, LX AWD, LX FWD, LXi AWD, LXi FWD, Touring AWD, Touring FWD | 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Chrysler Town & Country Transmission Oil Cooler
Part Number: 4644952
Product Specifications
- Other Name: Cooler, Oil; Transmission Cooler
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1995 Chrysler Town & Country | Base AWD, Base FWD | 6 Cyl 3.3L, 6 Cyl 3.8L
View related parts
Chrysler Town & Country Transmission Oil Cooler
Part Number: 4720894
Product Specifications
- Other Name: Coolr Pkg-Trans Oil To Air ; Cooler, Oil; Cooler Assembly, Transmission Cooler
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1992 Chrysler Town & Country | Base AWD, Base FWD | 6 Cyl 3.3L
- 1990 Chrysler Town & Country | 6 Cyl 3.0L, 6 Cyl 3.3L

Chrysler Town & Country Oil Cooler

Chrysler Town & Country vehicles employ Oil Cooler as the part ensures proper management of the engine oil temperature to enhance on its viscosity. Incorporated in the vehicle cooling system is an Oil Cooler, which employs oil-to-water cool mechanisms to expel heat produced while the engine is in use. This holds especially if the product has to stay in the oil tank while towing or even if it is used in an extremely hot regions of the world. Throughout the years, Chrysler Town & Country has used different types of Oil Coolers, however the main focus was on the OE factory designs. Nevertheless, these original equipment (OE) coolers may have a problem of blocking or rusting and thus may not work optimally. As for those looking for upgrading cooling systems due to cooler failures or for those who have extra space in their car and no Oil Cooler installed at all, there are many elements that can help increase the cooling performance and increase both oil and engine's lifespan.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Town & Country Oil Cooler at great affordable prices. Moreover, all genuine Chrysler Town & Country Oil Cooler come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Chrysler Town & Country Oil Cooler Parts Questions & Experts Answers

Engine Oil Cooler
4694338AC
Q: How to service the transaxle oil cooler and air conditioning condenser on Chrysler Town & Country?
A:
On the later models, the transaxle oil cooler and the air conditioning condenser are interconnected and hence are serviced as a single unit. First of all, pull the connector off the negative terminal of the battery. Next replace the rear and then raise the front of the vehicle and place it on jackstands. Take off the radiator and position a drain pan beneath the oil cooler line joints to avoid looking at dropped transaxle oil. Remove the transaxle oil cooler line fittings you have to first take out the covers of clips and then nut or circlip that is located in the slots of the flange. Screw the lines to shut them and inform that when the oil cooler lines are removed then it is advised to fit new hoses since the connection might have leaked had it not been disconnected. Unbolt the transaxle oil cooler and get it out of the way. If this cooler was taken off to be flushed due to a transaxle failure, get it flushed by a dealer service department, or a transaxle shop since some special tools are required in flushing. Installation is the vice-versa of removal and includes making assurance that new transaxle fluid lines are fitted. Last of all, locate the transaxle fluid and check for the fluid level and if needed add some amount of the fluid.