Genuine Chrysler Voyager Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Fluid Level Sensors found

  • Chrysler Voyager Brake Fluid Level Sensor - 68306576AB
    Diagram for Chrysler Voyager Brake Fluid Level Sensor - 68306576AB
    View related parts

    Chrysler Voyager Sensor-Brake Fluid Level

    Part Number: 68306576AB
    $12.82 MSRP: $18.55
    You Save: $5.73 (31%)
    ADD TO CART
    Product Specifications
    • Other Name: Sensor Brake Fluid Level; Fluid Level Sensor, Fluid Sensor
    • Replaces: 68306576AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following Vehicles:
    • 2020-2024 Chrysler Voyager | L FWD, LX FWD, LXI FWD | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6L
  • Chrysler Voyager Brake Fluid Level Sensor - 4797655
    Diagram for Chrysler Voyager Brake Fluid Level Sensor - 4797655
    View related parts

    Chrysler Voyager Switch-Brake Fluid Level

    Part Number: 4797655
    $20.10 MSRP: $28.90
    You Save: $8.80 (31%)
    ADD TO CART
    Product Specifications
    • Other Name: Switch Brake Fluid Level
    • Replaced by: 5140310AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following Vehicles:
    • 2000-2003 Chrysler Voyager | Base, EC, LX, SE | 4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.3L, 6 Cyl 3.8L

Chrysler Voyager Brake Fluid Level Sensor

The Chrysler Voyager Brake Fluid Level Sensor monitors the volume of the reservoir in real time and alerts the driver if the hydraulic supply goes below the safe line. This Brake Fluid Level Sensor, applied across many production years of Chrysler, is mounted on top of the master cylinder. It uses a float that flips a simple switch, sending a clean two-wire signal to either the dash lamp or the ABS unit. So, any Voyager operator knows trouble before pedal feel fades. The uncomplicated design, which resists corrosion and vibration, has given the Brake Fluid Level Sensor a sound reputation for lasting reliability under harsh climates. Due to its association with the pressure differential warning circuit, the Brake Fluid Level Sensor forms a double layer of protection and enhances the efficiency of the brakes. Owners can replace a worn-out Brake Fluid Level Sensor without hunting for unique harnesses or adapters, making maintenance affordable for just about everyone in the Chrysler family hauler crowd. Compatibility spans early short-wheelbase minivans up through the recent sixth-generation platform. Regardless of configuration level, the feedback provided will always be the same to any Voyager trim as they have the same Brake Fluid Level Sensor architecture. A quick self-check at start-up confirms the Brake Fluid Level Sensor status, allowing drivers to roll away with confidence. An identical electrical behavior is seen when the Brake Fluid Level Sensor operates in a first-generation Voyager or in a present-day Canadian assembly line version. This demonstrates Chrysler's commitment to platform commonality. Applied in every Voyager model, this little device allows Chrysler's occupant sensing to maintain electronic precision with mechanical simplicity. Therefore, they are confident every Voyager will remain secure, vigilant, and ready for action. Through this promise, the Voyager community remains loyal to the brand, hence strengthening Chrysler reputation while ensuring brake performance sharp and journeys safe.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Chrysler Voyager Brake Fluid Level Sensor at great affordable prices. Moreover, all genuine Chrysler Voyager Brake Fluid Level Sensor come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Related Chrysler Voyager Parts