Genuine Dodge Avenger Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Fluid Level Sensors found

  • Diagram for Dodge Avenger Brake Fluid Level Sensor - 68057090AB
    View related parts

    Dodge Avenger Switch-Brake Fluid Level

    Part Number: 68057090AB
    $20.15 MSRP: $29.10
    You Save: $8.95 (31%)
    ADD TO CART
    Product Specifications
    • Other Name: Switch Brake Fluid Level
    • Replaced by: 68057090AC
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following Vehicles:
    • 2010-2013 Dodge Avenger | Express, Heat, LUX, Mainstreet, R/T FWD, SE, SXT, SXT Plus | 4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L, 6 Cyl 3.6L
  • Diagram for Dodge Avenger Brake Fluid Level Sensor - 68057090AA
    View related parts

    Dodge Avenger Switch-Brake Fluid Level

    Part Number: 68057090AA
    $20.15 MSRP: $29.10
    You Save: $8.95 (31%)
    ADD TO CART
    Product Specifications
    • Other Name: Switch Brake Fluid Level
    • Replaced by: 68057090AC
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following Vehicles:
    • 2008-2009 Dodge Avenger | R/T AWD, R/T FWD, SE, SXT | 4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L
  • Diagram for Dodge Avenger Brake Fluid Level Sensor - 68057090AC
    View related parts

    Dodge Avenger Switch-Brake Fluid Level

    Part Number: 68057090AC
    $20.15 MSRP: $29.10
    You Save: $8.95 (31%)
    ADD TO CART
    Product Specifications
    • Other Name: Switch Brake Fluid Level; Level Sensor
    • Replaces: 68057090AA, 68057090AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following Vehicles:
    • 2008-2014 Dodge Avenger | Express, Heat, LUX, Mainstreet, R/T AWD, R/T FWD, SE, SXT, SXT Plus | 4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L, 6 Cyl 3.6L
  • Dodge Avenger Brake Fluid Level Sensor - MB618382
    Diagram for Dodge Avenger Brake Fluid Level Sensor - MB618382
    View related parts
    Product Specifications
    • Other Name: Level Sensor
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    Fits the following Vehicles:
    • 1995-2000 Dodge Avenger | Base, ES | 4 Cyl 2.0L, 6 Cyl 2.5L

Dodge Avenger Brake Fluid Level Sensor

Dodge Avenger Brake Fluid Level Sensor ensures you're alerted if brake fluid level falls below a safe point for a steady stop. Housed within the cap of the master cylinder, the Brake Fluid Level Sensor utilizes a float switch to illuminate the dashboard before pedal feel changes. This early warning adds to the reliability that forms the safety image of Dodge and helps the Avenger owner feel confident in traffic since the Brake Fluid Level Sensor prevents fade and shortens reaction time. The earlier coupe versions applied a very simple two lead Brake Fluid Level Sensor. The later Avenger sedans tie the sensor into much wider electronic networks that watch over ABS and parking brake circuits, letting one lamp flag several hazards. The Brake Fluid Level Sensor is super-reliable because the basic specs are uncomplicated and it is sealed against moisture and dirt and years of heat cycles. Whether your Dodge rolled off the line in 1994, 2000, or 2014, every production year is covered with fitment. Installing a direct swap Brake Fluid Level Sensor restores factory accuracy in minutes. With an early warning of falling hydraulic pressure, the device helps any Avenger driver fix leaks before they become an issue, thus enhancing the effectiveness of the rotors and pads. Some trims of Dodge vehicles route the sensor output to control modules instead of the main wiring, reducing weight but still allowing more data to flow. Another highlight is the sealed body of the float that shuts out moisture, helping each Avenger maintain a clean electrical reading through winter salt and summer heat. The Brake Fluid Level Sensor is virtually maintenance-free, broad coverage, and quiet operation keep the sensor at the head of its class, giving Dodge enthusiasts peace of mind every time they hit the Avenger's pedal. The Dodge genuine Brake Fluid Level Sensor will allow your Dodge to continue to provide sharp, predictable braking to maintain the spirit of performance.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Avenger Brake Fluid Level Sensor at great affordable prices. Moreover, all genuine Dodge Avenger Brake Fluid Level Sensor come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Related Dodge Avenger Parts