My Garage
My Account
Cart
Genuine Dodge Avenger Hood Cable
Hood Release Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Hood Cables found
Dodge Avenger Hood Cable
The Dodge Avenger Hood Cable allows motorists to pop the hood from inside the cabin. A quick tug on the release handle is turned into a pull on the latch that frees the panel. The Hood Cable is a flexible steel core that slides within a protective sheath. This important component forms the link from an interior lever to a latch assembly for every Avenger owner needing speedy engine access. Many Dodge models in this series employ a two-stage Hood Cable, having one strand going to a junction under the hood and twin offshoots running to left and right latches for a balanced release. The Dodge design tweaks did not alter this arrangement over the years, so there are no different generations of cables, only small length changes that correspond to body revisions in the production cycle of each Avenger. If the sheathing cracks and moisture enters, it could corrode the wire and you could experience rough travel or a snapped line. This happens when the car's Avenger hood is locked. The Dodge driver cannot perform the simple action of pulling their hood lid open. This makes inspections or fluid top-ups impossible until a new Hood Cable is fitted. Check your Hood Cable for frayed strands or a sticky feel to avoid a roadside hassle.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Avenger Hood Cable at great affordable prices. Moreover, all genuine Dodge Avenger Hood Cable come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Avenger Hood Cable Parts Questions & Experts Answers
- Q: How to adjust and replace the hood latch and release cable on Dodge Avenger?A:Disconnect the hood ajar sensor's electrical connector if present. Remove the bolts holding the hood latch to the radiator support and detach the latch. Adjust the hood's position by loosening the bolts and moving the latch. Detach the hood release cable and remove the latch. To install, reverse the removal process. Release the cable end and slide it into the hood latch's keyhole slot. Remove the cable from the latch. In the passenger compartment, detach the hood release cable and handle assembly. Remove the rubber cable insulator under the dash. Connect a string to the cable, detach it and pull it through the firewall. Connect the string to the new cable and pull it through the firewall. Reverse the removal process to complete the installation.
