My Garage
My Account
Cart
Genuine Dodge Avenger Steering Column Cover
Steering Column Cover Bezel- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
23 Steering Column Covers found
Dodge Avenger Steering Column Shroud
Part Number: 1TE07DX9AC$48.55 MSRP: $92.80You Save: $44.25 (48%)
Dodge Avenger Steering Column Shroud
Part Number: 1TE07DX9AA$62.77 MSRP: $92.80You Save: $30.03 (33%)
Dodge Avenger Steering Column Shroud
Part Number: 1GA13XDVAC$73.38 MSRP: $84.55You Save: $11.17 (14%)
Dodge Avenger Steering Column Shroud
Part Number: 1GA13XDVAA$73.38 MSRP: $84.55You Save: $11.17 (14%)
| Page 1 of 2 |Next >
1-20 of 23 Results
Dodge Avenger Steering Column Cover
The Dodge Avenger Steering Column Cover serves the primary function to protect the exposed steering column and keep the cockpit clean and comfortable. The visibility of the Steering Column Cover below the wheel makes any scratches or cracks instantly noticeable and spoils the tidy appearance drivers want. Damage to the inner panel is not only ugly to look at but also distracts the driver and diminishes ride enjoyment. An immaculate Steering Column Cover enhances value. When wear begins, owners should replace the Steering Column Cover promptly instead of allowing the wear to creep to the surrounding trim. Prompt measures allow the Avenger cabin to remain quiet and refined. Dodge has utilized a two-piece clamshell style Steering Column Cover on every Avenger version throughout the years. This cover locks together around the column, enabling quick removal and installation with simple tools. No other style has been noted. This continuity of design of the materials means that the fit and finish is consistent across the Dodge cabin family and fitting a new unit brings back the trademark Dodge Avenger interior, making the car feel fresh but familiar.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Avenger Steering Column Cover at great affordable prices. Moreover, all genuine Dodge Avenger Steering Column Cover come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Avenger Steering Column Cover Parts Questions & Experts Answers
- Q: How to remove and install the steering column cover and shroud on Dodge Avenger?A:Place the steering column tilt in the full upward position and remove the steering column opening cover. Detach the steering column cover mounting screws and remove the support. Place the column tilt at the full downward position as you leave the tilt lever in the released position. Remove the fasteners and release the mounting clips that hold each shroud, and remove the lower shroud. Be careful as the gap hider on the upper shroud is attached to the Instrument Cluster by four retaining tabs which can be released by hand. Place the steering column in the maximum extended position. Reach up behind the shroud gap hider and release the tabs that retain the shroud gap hider and instrument cluster. Installation is the reverse of removal.
