How to remove and install a trunk lid, trunk lid support struts, and trunk lid latch on Dodge Avenger?

To remove the trunk lid, first take off the trim panel fasteners and disconnect any attached cables. Mark around the hinge bolts for alignment. With assistance, remove the hinge bolts and lift off the lid. To install, reverse these steps. The Trunk Lid Lift Supports don't need removal for this process. If needed, prop open the lid, pry out the lift support locking caps and remove the supports. Replace supports as a pair, one side at a time. Reverse steps to install. For the latch, remove the trim panel, disconnect the electrical connector, remove the latch fasteners and the latch. Reverse steps to install.

Genuine Dodge Avenger Trunk Lid Lift Support

Lift Strut Rod

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Trunk Lid Lift Supports found

View related parts
Dodge Avenger PROP/GAS-DECKLID
Part Number: 68064414AA
Product Specifications
- Other Name: Prop Deck Lid; Lift Cylinder, Support Cylinder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2014 Dodge Avenger | Express, Heat, LUX, Mainstreet, R/T FWD, SE, SXT, SXT Plus | 4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L, 6 Cyl 3.6L
View related parts
Dodge Avenger Deck Lid Prop/Gas
Part Number: 2AML5055AA
$15.96 MSRP: $22.90
You Save: $6.94 (31%)
Product Specifications
- Other Name: PROP/GAS-Deck Lid
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2014 Dodge Avenger | Express, Heat, LUX, Mainstreet, R/T AWD, R/T FWD, SE, SXT, SXT Plus | 4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L, 6 Cyl 3.6L
View related parts
Dodge Avenger Deck Lid Prop/Gas
Part Number: 5155055AB
Product Specifications
- Other Name: Prop Deck Lid; Lift Cylinder, Support Cylinder
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2014 Dodge Avenger | Express, Heat, LUX, Mainstreet, R/T AWD, R/T FWD, SE, SXT, SXT Plus | 4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5L, 6 Cyl 3.6L

Dodge Avenger Trunk Lid Lift Support

Dodge Avenger Trunk Lid Lift Support keeps safe lid operation. It allows it to rise smoothly and remain aloft so that you have both hands free. Every Trunk Lid Lift Support is built of a gas charged cylinder that is like a spring or a shock, which stores up energy. After the trunk's latch is released and the trunk deck clears halfway, a Trunk Lid Lift Support pushes the panel the rest of the way up and holds it there extremely securely. The pressure inside the Trunk Lid Lift Support is carefully matched to the weight of the lid so that when you open it, it feels light and not heavy. As you close it, it stays controlled and prevents the trunk from slamming down. Across the various generations of Dodge Avengers, the basic gas strut idea was retained as it works against the weather, requires no power, and offers predictable lift. The components that work appropriately safeguard the Dodge Avenger's trunk edge paint as well as its weather seal. As the Trunk Lid Lift Support ages or encounters temperature fluctuations, the lid may feel heavy and drift down, and the problem may be that it no longer rises easily. This is the time for replacement. When a Trunk Lid Lift Support weakens, it can inconvenience any Dodge Avenger owner.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Avenger Trunk Lid Lift Support at great affordable prices. Moreover, all genuine Dodge Avenger Trunk Lid Lift Support come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Avenger Trunk Lid Lift Support Parts Questions & Experts Answers

Deck Lid Prop/Gas
5155055AB
Q: How to remove and install a trunk lid, trunk lid support struts, and trunk lid latch on Dodge Avenger?
A:
To remove the trunk lid, first take off the trim panel fasteners and disconnect any attached cables. Mark around the hinge bolts for alignment. With assistance, remove the hinge bolts and lift off the lid. To install, reverse these steps. The Trunk Lid Lift Supports don't need removal for this process. If needed, prop open the lid, pry out the lift support locking caps and remove the supports. Replace supports as a pair, one side at a time. Reverse steps to install. For the latch, remove the trim panel, disconnect the electrical connector, remove the latch fasteners and the latch. Reverse steps to install.