How to replace Battery Sensor on Dodge Challenger?

Initially, the Integrated Battery Sensor (IBS) is part of the negative battery terminal and replaced as one unit. However, start by disconnecting the IBS connector. After that, remove the nut then disconnect the negative battery cable from the IBS terminal. From there take out the negative battery terminal from the battery. Conversely, installation is just a reverse of the removal.

Genuine Dodge Challenger Battery Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Battery Sensors found

View related parts
Dodge Challenger Battery Sensor
Part Number: 4692269AI
$206.31 MSRP: $291.00
You Save: $84.69 (30%)
ADD TO CART
Product Specifications
- Other Name: Sensor Battery; Sensor, Temperature Sensor
- Replaces: 4692269AF, 4692269AE, 4692269AH, 4692269AG, 4692269AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2016 Dodge Challenger | R/T, R/T Scat Pack, SRT 392, SRT Hellcat, SXT, SXT Plus | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Dodge Challenger Battery Sensor
Part Number: 56029777AB
$69.36 MSRP: $105.00
You Save: $35.64 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor Battery
- Replaced by: 56029777AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2020 Dodge Challenger | GT AWD, GT RWD, R/T 392 RWD, R/T RWD, R/T Scat Pack RWD, SRT 392 RWD, SRT Demon RWD, SRT Hellcat RWD, SXT AWD, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Dodge Challenger Battery Sensor
Part Number: 56029777AC
$69.36 MSRP: $105.00
You Save: $35.64 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor-Battery; Battery Current Sensor, Sensor
- Replaces: 56029777AA, 56029777AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2023 Dodge Challenger | GT AWD, GT RWD, R/T 392 RWD, R/T RWD, R/T Scat Pack RWD, SRT 392 RWD, SRT Demon RWD, SRT Hellcat RWD, SXT AWD, SXT RWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2 L GAS, 8 Cyl 6.2L, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Dodge Challenger Battery Sensor
Part Number: 56029777AA
$69.36 MSRP: $105.00
You Save: $35.64 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor Battery
- Replaced by: 56029777AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017 Dodge Challenger | GT AWD, R/T 392 RWD, R/T RWD, SRT 392 RWD, SRT Hellcat RWD, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L

Dodge Challenger Battery Sensor

The Dodge Challenger's Battery Sensor monitors battery voltage, current, and temperature to provide real-time data to the vehicle management system (VMS) so that charging is optimized, problems are spotted early, and battery life is preserved. By sampling electrical flow in real time, the Battery Sensor allows the computer to regulate the alternator's output, preventing over-charging during everyday trips and ensuring sufficient battery reserve power for each high-draw starter cycle. The earlier versions of the Dodge Challenger relied mainly on simple voltage feedback. The current models come with a Battery Sensor that supervises many parameters. Moreover, it's an important upgrade for the recent Dodge Challenger variants with start-stop technology because the quick restarts of these models require accurate energy handling. Dodge has had the same objective over the years, yet the multi-parameter design of the Battery Sensor provides quicker fault detection compared to the older single-parameter style. The Battery Sensor is a vital component during the engine start control process. It is an electronic circuit integrated along with the main battery cable. For example, with the proper gauge wiring and solid connectors, the Battery Sensor works with relays to ensure every Dodge Challenger start is a confident one.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Challenger Battery Sensor at great affordable prices. Moreover, all genuine Dodge Challenger Battery Sensor come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Challenger Battery Sensor Parts Questions & Experts Answers

Battery Sensor
56029777AB
Q: How to replace Battery Sensor on Dodge Challenger?
A:
Initially, the Integrated Battery Sensor (IBS) is part of the negative battery terminal and replaced as one unit. However, start by disconnecting the IBS connector. After that, remove the nut then disconnect the negative Battery Cable from the IBS terminal. From there take out the negative battery terminal from the battery. Conversely, installation is just a reverse of the removal.