How do you replace a antenna on Dodge Daytona?

Remove the negative cable from the battery and set it aside and such a way that does not make contact with the negative terminal thus causing power to flow into the car's circuit. Take out the radio and with the aid of the wrench you can undo the knob which holds the top end of the antenna mast. The antenna lead and body are at the interior side of the fender, therefore, use needle nose pliers to unscrew and remove the cap nut and adapter, as the gasket remains firmly attached to it. There are three inner fender shield-to-fender screws which are accessed from beneath the fender; the shield is pulled back to gain access to the antenna body and lead assembly. The new antenna can be fitted by inserting the body and lead assembly into the fender and then fitting of adapter and gasket, a cap nut and the antenna mast. Last of all, replace the fender shield screws and set the radio in proper position and fix the negative terminal of battery, check the antenna lead should be connected to the radio.

Genuine Dodge Daytona Antenna

Radio Antenna

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Antenna found

View related parts
Dodge Daytona Antenna Mast
Part Number: 4469015
Product Specifications
- Other Name: Mast, Antenna
- Replaced by: 68040423AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1988-1993 Dodge Daytona | Base, ES, IROC, IROC R/T | 4 Cyl 2.2L, 4 Cyl 2.5L, 6 Cyl 3.0L

Dodge Daytona Antenna

Dodge Daytona Antenna converts invisibly radio wave function into sound quality every driver appreciates during their journey. The Antenna provides the coupe with connection to news, music, and navigational cues. Behind that convenience lies a thin strip of conductive segments that gather electrical currents from the receiver and radiate or capture electromagnetic waves that traverse space. In early production years, they had a fixed-mast style Antenna that rises from the fender. Its omnidirectional coverage enables the car to grab stations from any direction without adjustment. From later models, a power mast Antenna that retracted automatically when the ignition was shut off, a feature that also cut wind noise and kept the rod sheltered from the weather while retaining the broad range of reception, was applied. Dodge owners in the cabin experience minimal static since the Daytona wiring keeps the Antenna lead isolated from other circuits. Daytona fans within the Dodge cabin praise the Antenna for consistent signals on rural highways. Both mast types carry a conductor tuned to half-wavelength size for body contours. However, the retractable model also features a small motor and gear track, mirroring the lively image of Dodge Daytona.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Daytona Antenna at great affordable prices. Moreover, all genuine Dodge Daytona Antenna come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Daytona Antenna Parts Questions & Experts Answers

Antenna Mast
4469015
Q: How do you replace a antenna on Dodge Daytona?
A:
Remove the negative cable from the battery and set it aside and such a way that does not make contact with the negative terminal thus causing power to flow into the car's circuit. Take out the radio and with the aid of the wrench you can undo the knob which holds the top end of the antenna mast. The antenna lead and body are at the interior side of the fender, therefore, use needle nose pliers to unscrew and remove the cap nut and adapter, as the gasket remains firmly attached to it. There are three inner fender shield-to-fender screws which are accessed from beneath the fender; the shield is pulled back to gain access to the antenna body and lead assembly. The new antenna can be fitted by inserting the body and lead assembly into the fender and then fitting of adapter and gasket, a cap nut and the antenna mast. Last of all, replace the fender shield screws and set the radio in proper position and fix the negative terminal of battery, check the antenna lead should be connected to the radio.

Related Dodge Daytona Parts

Browse by Year

1993 Antenna 1992 Antenna 1991 Antenna 1990 Antenna 1989 Antenna 1988 Antenna