My Garage
My Account
Cart
Genuine Dodge Daytona Axle Shaft
Car Axle Shaft- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
16 Axle Shafts found
Dodge Daytona Axle Shaft
Axle Shaft in particular for Dodge Daytona vehicles is an important component that aid in transferring power from the differential to the wheels for smooth and controlled movement. Most of the time made from high tensile steel, these axles are made in a way that they can rotate separately to enhance the grip when turning. They may use different types of Axle Shaft configurations that include the solid axle and half shafts as per the Daytona model and the suspension system used. The solid axles are found in the older rear-wheel-drive vehicles while halfshafts are used in the vehicle with independent suspension to transfer power from transaxle. Their features include; the solid axle housing the differential, half shafts are connected to the differential and wheel hubs at the splined ends.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Daytona Axle Shaft at great affordable prices. Moreover, all genuine Dodge Daytona Axle Shaft come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Daytona Axle Shaft Parts Questions & Experts Answers
- Q: How to remove and install driveaxles and hub bearing assemblies on Dodge Daytona?A:First of all, to remove the front hub bearing cap and related parts, loosen the axle nut with brakes applied, then lift the vehicle and remove the front wheel, axle nut, and washer. Remove the speedometer gear before the right axle. Detach the steering knuckle from the ball joint and separate the axle shaft from the hub. Remove the axle shaft from the differential. If the vehicle needs to be moved, secure the bearings with a bolt and nuts. To reinstall, clean and grease the CV Joint and seal, insert the axle shaft into the transaxle, and reattach the ball joint to the steering knuckle.
