My Garage
My Account
Cart
Genuine Dodge Daytona Exhaust Manifold
Engine Exhaust Manifold- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Exhaust Manifolds found
Dodge Daytona Left Exhaust Manifold
Part Number: MD096958$112.02 MSRP: $142.55You Save: $30.53 (22%)
Dodge Daytona Exhaust Manifold
Exhaust Manifold of the Dodge Daytona vehicles is extremely important in utilizing towering or hot exhaust gases from the engine to the exhaust system to improve the performance of the engine in question. Located on the engine block in several places, the manifold is an assembly that is built to gather exhaust from several cylinders and is usually made up of several tubes which should equal the number of cylinder in an engine. Various types of exhaust manifolds have been used in the Dodge Daytona models, they include cast iron and stainless steel used as standard exhaust manifolds, and high flow headers used in the models. Headers are beneficial in enhancing exhaust velocity and this in-turn results to good overall performance. The type of material used in the exhaust manifold as well as the design, therefore a damaged exhaust manifold must be replaced on time in order to optimize the flow of the exhausts as well as to evacuate toxic gases away from the cabin of the Dodge Daytona.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Daytona Exhaust Manifold at great affordable prices. Moreover, all genuine Dodge Daytona Exhaust Manifold come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Daytona Exhaust Manifold Parts Questions & Experts Answers
- Q: How to Replace the Exhaust Manifold and Intake Manifold on a Dodge Daytona?A:Disconnect the negative cable at the battery and place it out of the way. Depressurize the fuel system and drain the cooling system. Remove the air cleaner assembly and disconnect the vacuum, fuel, and electrical connections from the EFI throttle body. Disconnect the throttle linkage and remove the power steering pump drivebelt. Remove the power brake vacuum hose from the intake manifold. On some Canadian models, remove the coupling hose from the diverter valve-to-exhaust manifold air injection tube. Remove the water crossover hoses. Raise the vehicle and support it securely on jackstands. From under the vehicle, remove the power steering pump and intake manifold support bracket. Remove the EGR tube from the exhaust manifold and, on some Canadian models, remove the air injection tube assembly. Remove the intake manifold bolts and lower the vehicle. In the engine compartment, lift the intake manifold from the engine and remove the retaining nuts to detach the exhaust manifold. Carefully scrape all traces of gasket material and sealing compound from the cylinder head and manifold contact surfaces. Use a straight edge to check the gasket surfaces of the manifolds for flatness and inspect them for cracks and corrosion. Replace any damaged or warped manifolds. Apply a thin coat of gasket sealant to the manifold sides of the new gaskets and place them in position. Install the exhaust manifold and tighten the nuts in a criss-cross pattern. Place the intake manifold in position and tighten the retaining bolts in a criss-cross pattern. The remainder of the installation procedure is the reverse of removal.
