My Garage
My Account
Cart
Genuine Dodge Daytona Wiper Motor
Windshield Wiper Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Wiper Motors found
Dodge Daytona Wiper Motor
The Wiper Motor is an important component in the Dodge Daytona cars as it helps operate the windshield wipers the enable wiping of rain and other debris for the purpose of enhancing visibility. This electric motor is set to work at different speeds to enable drivers set the wiper frequencies depending on the prevailing weather. Dodge Daytona Wiper Motors come in new and refurbished kind packs. New Wiper Motors are totally procured from the factory, while remanufactured Wiper Motors are second hand Wiper Motors that are upgraded to the present standards through new replacement parts. This variety makes sure that, owners of Dodge Daytona vehicles are able to select the optimal option that will serve them right while at the same time, have perfect wiper functionality.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Daytona Wiper Motor at great affordable prices. Moreover, all genuine Dodge Daytona Wiper Motor come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Daytona Wiper Motor Parts Questions & Experts Answers
- Q: How to remove and install a iftgate wiper motor on Dodge Daytona?A:As a way of removing the wiper motor, unfasten the negative cable of the battery and allow it to be set aside and well away from the battery negative terminal. Next, pop the liftgate open and unscrew the two trim cover screws; it is possible for one of them to be missing on some car models, but do not worry as that is an ordinary occurrence; after that, remove prying each of the plastic pins and then using a screwdriver to take off the cover. Detach wiper arm by pulling its release tab with the help of a flat screwdriver and disconnect the connector taking out its clip. Subsequently, discard two wiper motor mounting bolts and then pull out the wiper motor with the help of lift gate. Remove the motor from the mounting plate and then switch the plate to the new motor. For installation which should be done carefully for safety purpose, place the motor and fix the bolts well and tightly then connect the wires and make the connector tight. Lastly screw the trim panel back and using your hand drive the retaining pin into the hole and working along the longeron to provide all pins, the last ones the screws from the plastic clips.
