My Garage
My Account
Cart
Genuine Dodge Durango Accelerator Cable
Choke Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
7 Accelerator Cables found
Dodge Durango Accelerator Cable
The Dodge Durango Accelerator Cable lets the driver's input reach the throttle plate instantaneously, allowing a prompt response to every press of the gas pedal. The Accelerator Cable links the cabin pedal to the carburetor linkage. It pulls the throttle plate open to allow more air into the engine. This causes additional fuel to exit the float bowl through the venturi. As a result, combustion takes place at a level that meets driver demand. This basic run steel wire-in-sheath type design was found on early Dodge models that utilized carburetors. The same arrangement was employed on the first generation Durango before electronic fuel injection became universal. No matter what year it is made, the Accelerator Cable is shielded inside a flexible outer casing, and adjustable end fittings maintain correct tension and pedal feel. Dodge continued refining the mechanical setup on Durango editions until drive-by-wire systems finally replaced it, so only the carbureted or early injected trims are fitted with the Accelerator Cable. Regular inspections will help the Accelerator Cable remain smooth and not become sticky, which can affect the Dodge Durango's performance.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Durango Accelerator Cable at great affordable prices. Moreover, all genuine Dodge Durango Accelerator Cable come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Durango Accelerator Cable Parts Questions & Experts Answers
- Q: How to remove and install an accelerator cable on Dodge Durango?A:Hemi engines don't use a conventional accelerator cable, instead, the throttle plate is controlled electronically by the Powertrain Control Module (PCM) via the Accelerator Pedal Position Sensor (APPS) located at the accelerator pedal. To replace the cable on a Hemi, remove the air intake duct and air resonator box if present, detach the cable from the APPS and the accelerator pedal, and pull it through the firewall. Reinstall in reverse order.
