How to remove and install a radiator on Dodge Durango?

Take the cable off of the negative battery terminal. Since the coolant seems fresh and good, pull it out from the system and keep it to reuse later. Pushpin fasteners secure the cover for the radiator support. Take them out to remove the cover. On Durango models, remove the air filter housing. Take off the hose bolted to the coolant reservoir and remove it from the radiator. Lift the cooler off its mounting where it meets the radiator and then unscrew all the attaching bolts. Disconnect the transmission fluid lines and disconnect the oil cooler, if it's in that spot. Undo the clamps on both ends of the hoses, and slide the hoses off the radiator connections. If the hoses won't come off by hand, grab them near the end with adjustable pliers, turn the seals to break them, and pull carefully, avoiding deforming the radiator fittings. Get rid of your old hoses and put fresh ones on. Pull the fan guard off the radiator, and move it just above the fan. Unbolt the bracket that holds the radiator onto the tank. Be very careful when pulling the radiator out from under the hood - make sure to prevent spillage and paint damage, while keeping away from hitting the transmission and power steering cooling fin areas. Take note of where the rubber mounting cushions are when you take out the radiator. Swap out any that are dull, bloated, and not working correctly. Examine your radiator with no water in it to check for leakage and damage. Give the work to radiator shops or dealer repair teams, since this job demands specialist tools and procedures. First use a water hose to clean off bugs and dirt from the radiator front, then clean any remaining debris with compressed air and a soft brush, always be careful not to break the radiator's cooling fins. Check the radiator mountings for wear before putting in the radiator and make sure nothing gets caught in them. To reinstall the radiator, start by tightening all the mounting bracket fastener bolts. Following installation, adjust the cooling system to match antifreeze and water mix, while also checking and refilling automatic transmission and power steering fluids. Start the car engine, check for leaks, let it warm up at normal running temperature until the input radiator pipe gets warm, then recheck the coolant level and adjust as needed.

Genuine Dodge Durango Radiator

Cooling Radiator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

36 Radiators found

View related parts
Dodge Durango Coolant Antifreeze
Part Number: 5066386AA
$15.84 MSRP: $22.70
You Save: $6.86 (31%)
ADD TO CART
Product Specifications
- Other Name: Antifreeze
- Replaced by: 68048953AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2006 Dodge Durango | Base 2WD, Base 4WD, Limited 2WD, Limited 4WD, R/T 4WD, SLT 2WD, SLT 4WD, SLT Plus 2WD, SLT Plus 4WD, Sport 2WD, Sport 4WD, ST 2WD, ST 4WD, SXT 2WD, SXT 4WD | 6 Cyl 3.7L, 6 Cyl 3.9L, 8 Cyl 4.7L, 8 Cyl 5.2L, 8 Cyl 5.7L, 8 Cyl 5.9L
View related parts
Dodge Durango Engine Cooling Radiator
Part Number: 52029043AD
$258.68 MSRP: $388.00
You Save: $129.32 (34%)
ADD TO CART
Product Specifications
- Other Name: Radiator Engine Cooling Note:25 pc min Qty Mix and Match Pallet Program only, Use mopar.com to order, Magneti-Marelli Parts tab; Radiator
- Replaces: 52029043AB, 52029043AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2009 Dodge Durango | Adventurer 2WD, Adventurer 4WD, Limited 2WD, Limited 4WD, SE 2WD, SE 4WD, SLT 2WD, SLT 4WD, ST 2WD, ST 4WD, SXT 2WD, SXT 4WD | 6 Cyl 3.7L, 8 Cyl 4.7L, 8 Cyl 5.7L
View related parts
Dodge Durango Engine Cooling Radiator
Part Number: 55038001AH
$555.50 MSRP: $845.00
You Save: $289.50 (35%)
ADD TO CART
Product Specifications
- Other Name: Radiator-Engine Cooling; Radiator
- Replaces: 55038001AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2024 Dodge Durango | Citadel AWD, Citadel RWD, Pursuit Vehicle AWD, R/T AWD, R/T RWD, Special Service AWD, Special Service RWD, SRT 392 AWD, SRT AWD | 8 Cyl 5.7L, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
- 2011-2014 Dodge Durango | Citadel AWD, Citadel RWD, Crew AWD, Crew RWD, Express AWD, Express RWD, Heat AWD, Heat RWD, Limited AWD, Limited RWD, R/T AWD, R/T RWD, Special Service AWD, Special Service RWD, SXT AWD, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7L
View related parts
Dodge Durango Engine Cooling Radiator
Part Number: 68244867AA
$330.00 MSRP: $502.00
You Save: $172.00 (35%)
ADD TO CART
Product Specifications
- Other Name: Radiator-Engine Cooling; Radiator
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2020 Dodge Durango | Citadel AWD, Citadel RWD, GT AWD, GT RWD, Pursuit Vehicle AWD, Special Service AWD, Special Service RWD, SXT AWD, SXT RWD | 6 Cyl 3.6L
View related parts
Dodge Durango Engine Cooling Radiator
Part Number: 68273308AA
$539.00 MSRP: $819.00
You Save: $280.00 (35%)
ADD TO CART
Product Specifications
- Other Name: Radiator-Engine Cooling; Radiator
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2020 Dodge Durango | Citadel AWD, Citadel RWD, GT AWD, GT RWD, Pursuit Vehicle AWD, Special Service AWD, Special Service RWD, SXT AWD, SXT RWD | 6 Cyl 3.6L
View related parts
Dodge Durango Engine Cooling Radiator
Part Number: 52014529AB
$421.30 MSRP: $641.00
You Save: $219.70 (35%)
ADD TO CART
Product Specifications
- Other Name: Radiator-Engine Cooling; Radiator
- Replaces: 55038185AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Durango | Citadel AWD, Citadel RWD, Crew AWD, Crew RWD, Express AWD, Express RWD, Heat AWD, Heat RWD, Limited AWD, Limited RWD, R/T AWD, R/T RWD, Special Service AWD, Special Service RWD, SXT AWD, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7L
View related parts
Dodge Durango Engine Cooling Radiator
Part Number: 68232592AB
$464.20 MSRP: $705.00
You Save: $240.80 (35%)
ADD TO CART
Product Specifications
- Other Name: Radiator-Engine Cooling; Radiator
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015-2020 Dodge Durango | Citadel AWD, Citadel RWD, Limited AWD, Limited RWD, Pursuit Vehicle AWD, R/T AWD, R/T RWD, Special Service AWD, Special Service RWD, SXT AWD, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7L
View related parts
Dodge Durango Engine Cooling Radiator
Part Number: 68244086AA
$275.41 MSRP: $413.00
You Save: $137.59 (34%)
ADD TO CART
Product Specifications
- Other Name: Radiator-Engine Cooling; Radiator
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2020 Dodge Durango | Citadel AWD, Citadel RWD, GT AWD, GT RWD, Limited AWD, Limited RWD, Pursuit Vehicle AWD, Special Service AWD, Special Service RWD, SXT AWD, SXT RWD | 6 Cyl 3.6L
View related parts
Dodge Durango Engine Cooling Radiator
Part Number: 68232591AB
$324.47 MSRP: $484.00
You Save: $159.53 (33%)
ADD TO CART
Product Specifications
- Other Name: Radiator-Engine Cooling
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015 Dodge Durango | Citadel AWD, Citadel RWD, Limited AWD, Limited RWD, R/T AWD, R/T RWD, Special Service AWD, Special Service RWD, SXT AWD, SXT RWD | 6 Cyl 3.6L, 8 Cyl 5.7L
View related parts
Dodge Durango Engine Cooling Radiator
Part Number: 68244087AA
$389.40 MSRP: $592.00
You Save: $202.60 (35%)
ADD TO CART
Product Specifications
- Other Name: Radiator-Engine Cooling; Radiator
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2020 Dodge Durango | Citadel AWD, Citadel RWD, GT AWD, GT RWD, Limited AWD, Limited RWD, Pursuit Vehicle AWD, Special Service AWD, Special Service RWD, SXT AWD, SXT RWD | 6 Cyl 3.6L
View related parts
Dodge Durango Engine Cooling Radiator
Part Number: 68480070AC
$190.26 MSRP: $392.00
You Save: $201.74 (52%)
ADD TO CART
Product Specifications
- Other Name: Radiator-Engine Cooling; Drain Plug, Radiator
- Replaces: 68480070AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Dodge Durango | 8 Cyl 5.7 L GAS
View related parts
Dodge Durango Engine Cooling Radiator
Part Number: 68365278AA
$663.30 MSRP: $1005.00
You Save: $341.70 (34%)
ADD TO CART
Product Specifications
- Other Name: Radiator-Engine Cooling; Radiator
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2023-2025 Dodge Durango | 8 Cyl 6.2 L GAS
View related parts
Dodge Durango Engine Cooling
Part Number: 68480071AC
$231.92 MSRP: $347.00
You Save: $115.08 (34%)
ADD TO CART
Product Specifications
- Other Name: Radiator
- Replaces: 68480071AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2025 Dodge Durango | Citadel AWD, Citadel RWD, GT AWD, GT RWD, Pursuit Vehicle AWD, Special Service RWD, SXT AWD, SXT RWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L
View related parts
Dodge Durango Engine Cooling Radiator
Part Number: 55038185AE
$421.30 MSRP: $641.00
You Save: $219.70 (35%)
ADD TO CART
Product Specifications
- Other Name: Radiator Engine Cooling Note:25 pc min Qty Mix and Match Pallet Program only, Use mopar.com to order, Magneti-Marelli Parts tab
- Replaced by: 52014529AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011 Dodge Durango | Citadel AWD, Citadel RWD, Crew AWD, Crew RWD, Express AWD, Express RWD, Heat AWD, Heat RWD, R/T AWD, R/T RWD | 6 Cyl 3.6L, 8 Cyl 5.7L
View related parts
Dodge Durango Engine Cooling
Part Number: 68480072AC
$237.50 MSRP: $355.00
You Save: $117.50 (34%)
ADD TO CART
Product Specifications
- Other Name: Radiator
- Replaces: 68480072AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2025 Dodge Durango | Citadel AWD, Citadel RWD, GT AWD, GT RWD, Pursuit Vehicle AWD, Special Service RWD, SXT AWD, SXT RWD | 6 Cyl 3.6 L GAS, 6 Cyl 3.6L
View related parts
Dodge Durango Cooler-Auxiliary Low Temperature
Part Number: 68365280AB
$291.02 MSRP: $436.00
You Save: $144.98 (34%)
ADD TO CART
Product Specifications
- Other Name: Auxiliary Cooler, Auxiliary Radiator, Intercooler
- Replaces: 68365280AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2023-2025 Dodge Durango | 8 Cyl 6.2 L GAS
View related parts
Dodge Durango Engine Cooling Radiator
Part Number: 52029044AD
$293.25 MSRP: $440.00
You Save: $146.75 (34%)
ADD TO CART
Product Specifications
- Other Name: Radiator Engine Cooling Note:25 pc min Qty Mix and Match Pallet Program only, Use mopar.com to order, Magneti-Marelli Parts tab; Radiator
- Replaces: 52029044AB, 52029044AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Dodge Durango | Adventurer 2WD, Adventurer 4WD, Limited 2WD, Limited 4WD, SLT 2WD, SLT 4WD, ST 2WD, SXT 2WD, SXT 4WD | 8 Cyl 5.7L
View related parts
Dodge Durango Engine Cooling
Part Number: 68480071AB
$231.92 MSRP: $347.00
You Save: $115.08 (34%)
ADD TO CART
Product Specifications
- Replaced by: 68480071AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021 Dodge Durango | Citadel AWD, Citadel RWD, GT AWD, GT RWD, Pursuit Vehicle AWD, Special Service RWD, SXT AWD, SXT RWD | 6 Cyl 3.6L
View related parts
Dodge Durango Engine Cooling Radiator
Part Number: 52029043AB
$258.68 MSRP: $388.00
You Save: $129.32 (34%)
ADD TO CART
Product Specifications
- Other Name: Radiator Engine Cooling Note:25 pc min Qty Mix and Match Pallet Program only, Use mopar.com to order, Magneti-Marelli Parts tab
- Replaced by: 52029043AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2006 Dodge Durango | Limited 2WD, Limited 4WD, SLT 2WD, SLT 4WD, ST 2WD, ST 4WD, SXT 2WD, SXT 4WD | 6 Cyl 3.7L, 8 Cyl 4.7L
View related parts
Dodge Durango Engine Cooling Radiator
Part Number: 52029043AC
$258.68 MSRP: $388.00
You Save: $129.32 (34%)
ADD TO CART
Product Specifications
- Other Name: Radiator-Engine Cooling
- Replaced by: 52029043AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Dodge Durango | Limited 2WD, Limited 4WD, SLT 2WD, SLT 4WD, SXT 2WD, SXT 4WD | 6 Cyl 3.7L, 8 Cyl 4.7L, 8 Cyl 5.7L

| Page 1 of 2 |Next >

1-20 of 36 Results

Dodge Durango Radiator

The engine cooling system of the Dodge Durango comes with the radiator that helps in eliminating the excess heat of the engine via circulating the coolant. This process helps avoid some levels of overheating and this may cause lots of damages. Further, the radiator has several fins to improve heat exchange while all the components of the vehicle work optimally. Through the years, several changes in the radiators have been incorporated in the Dodge Durango starting from the older types of copper and brass to the more current aluminum cores. This shift also help to reduce the manufacturing costs and at the same time, also help to reduce overall weight. Simple procedures like flushing the radiator, using the right concentration of water and coolant or even routine checks should be performed to help the radiator last longer besides ensuring the proper running of the car. Maintenance of the Dodge Durango's radiator should be done properly so as to guarantee a good driving experience.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Durango Radiator at great affordable prices. Moreover, all genuine Dodge Durango Radiator come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Durango Radiator Parts Questions & Experts Answers

Engine Cooling Radiator
52029043AD
Q: How to remove and install a radiator on Dodge Durango?
A:
Take the cable off of the negative battery terminal. Since the coolant seems fresh and good, pull it out from the system and keep it to reuse later. Pushpin fasteners secure the cover for the radiator support. Take them out to remove the cover. On Durango models, remove the air filter housing. Take off the hose bolted to the coolant reservoir and remove it from the radiator. Lift the cooler off its mounting where it meets the radiator and then unscrew all the attaching bolts. Disconnect the transmission fluid lines and disconnect the oil cooler, if it's in that spot. Undo the clamps on both ends of the hoses, and slide the hoses off the radiator connections. If the hoses won't come off by hand, grab them near the end with adjustable pliers, turn the seals to break them, and pull carefully, avoiding deforming the radiator fittings. Get rid of your old hoses and put fresh ones on. Pull the fan guard off the radiator, and move it just above the fan. Unbolt the bracket that holds the radiator onto the tank. Be very careful when pulling the radiator out from under the hood - make sure to prevent spillage and paint damage, while keeping away from hitting the transmission and power steering cooling fin areas. Take note of where the rubber mounting cushions are when you take out the radiator. Swap out any that are dull, bloated, and not working correctly. Examine your radiator with no water in it to check for leakage and damage. Give the work to radiator shops or dealer repair teams, since this job demands specialist tools and procedures. First use a water hose to clean off bugs and dirt from the radiator front, then clean any remaining debris with compressed air and a soft brush, always be careful not to break the radiator's cooling fins. Check the radiator mountings for wear before putting in the radiator and make sure nothing gets caught in them. To reinstall the radiator, start by tightening all the mounting bracket fastener bolts. Following installation, adjust the cooling system to match antifreeze and water mix, while also checking and refilling automatic transmission and power steering fluids. Start the car engine, check for leaks, let it warm up at normal running temperature until the input radiator pipe gets warm, then recheck the coolant level and adjust as needed.