How to Remove and Install the Intake Air Temperature Sensor on Dodge Nitro?

The intake manifold temperature sensor is a thermistor that changes resistance with temperature. On 2.4L four-cylinder engines, it is located on the rear lower part of the intake manifold. For 2007 and earlier Liberty models, disconnect the electrical connector and remove the sensor mounting bolts to remove it. For Nitro and 2008 and later Liberty models, it is installed into the rubber air intake tube near the throttle body or beginning of the air filter housing. Disconnect the electrical connector and remove the sensor by turning it counterclockwise and pulling it out. Installation is the reverse of removal.

Genuine Dodge Nitro Intake Manifold Temperature Sensor

Air Intake Temperature Sensor

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

2 Intake Manifold Temperature Sensors found

View related parts
Dodge Nitro Sensor-Charge Air Temp
Part Number: 4606487AB
- Other Name: Sensor Charge Air Temp
$62.44 MSRP: $91.85
You Save: $29.41 (33%)

Add to Cart
More Info
Fits the following Vehicles:
2007-2011 Dodge Nitro | Detonator 2WD, Detonator 4WD, Heat 2WD, Heat 4WD, SE 2WD, SE 4WD, Shock 2WD, Shock 4WD, SLT 2WD, SLT 4WD, SXT 2WD, SXT 4WD | 6 Cyl 3.7L, 6 Cyl 4.0L
Less Info
View related parts
Dodge Nitro Sensor-Air Temperature
Part Number: 68031593AA
- Other Name: Sensor Air Temperature; Air Intake Temperature Sensor, Temperature Sensor
- Replaces: 5140331AA
$194.53 MSRP: $293.00
You Save: $98.47 (34%)

Add to Cart
More Info
Fits the following Vehicles:
2007-2009 Dodge Nitro | SLT 2WD, SLT 4WD
Less Info

Dodge Nitro Intake Manifold Temperature Sensor Parts Questions & Answers

Sensor-Air Temperature
68031593AA
Q: How to Remove and Install the Intake Air Temperature Sensor on Dodge Nitro?
A: The intake manifold temperature sensor is a thermistor that changes resistance with temperature. On 2.4L four-cylinder engines, it is located on the rear lower part of the intake manifold. For 2007 and earlier Liberty models, disconnect the electrical connector and remove the sensor mounting bolts to remove it. For Nitro and 2008 and later Liberty models, it is installed into the rubber air intake tube near the throttle body or beginning of the air filter housing. Disconnect the electrical connector and remove the sensor by turning it counterclockwise and pulling it out. Installation is the reverse of removal.