How to remove Pressure Plate,Release Bearing and Clutch Fork on Dodge Ram 2500?

To remove the clutch components, begin by raising and securely supporting the vehicle on jack stands. Disconnect the clutch release cylinder from the clutch housing without disconnecting the hydraulic fluid line. Proceed to remove the transmission, leaving the clutch fork and release bearing attached to the clutch housing. To support the clutch disc during removal, insert a clutch alignment tool through the clutch disc hub. Inspect the flywheel and pressure plate for indexing marks; if absent, create your own to ensure proper alignment during installation. Gradually loosen the pressure plate-to-flywheel bolts in a criss-cross pattern and remove them along with the pressure plate and clutch disc. Inspect all components, including the flywheel for defects, clutch disc for wear or damage, release bearing for replacement, and pressure plate for wear or damage. Clean the surfaces thoroughly and reinstall the flywheel. Align the clutch disc and pressure plate with an alignment tool and finger-tighten the pressure plate-to-flywheel bolts. Center the clutch disc using the alignment tool, then gradually tighten the bolts in a criss-cross pattern to the specified torque. Remove the alignment tool, lubricate the release bearing and related parts with high-temperature grease, reinstall the clutch release bearing if removed, and proceed to reinstall the transmission and all previously removed components. Finally, lower the vehicle.

Genuine Dodge Ram 2500 Clutch Fork

Release Fork

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Clutch Forks found

View related parts
Dodge Ram 2500 Lever-Clutch Release
Part Number: 52087515
$78.19 MSRP: $119.00
You Save: $40.81 (35%)
ADD TO CART
Product Specifications
- Other Name: Lever Clutch Release; Release Fork
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2010 Dodge Ram 2500 | 3-Person Cab 2WD, 3-Person Cab 4WD, Club Cab 2WD, Club Cab 4WD, Club Cab 8FT BOX 2WD, Club Cab 8FT BOX 4WD, Laramie Crew CAB 2WD, Laramie Crew Cab 4WD, Laramie Mega Cab 2WD, Laramie Mega CAB 2WD, Laramie Mega Cab 4WD, Laramie Quad Cab 2WD, Laramie Quad Cab 4WD, Laramie Regular Cab 2WD, Laramie Regular Cab 4WD, Mega Cab 2WD, Mega Cab 4WD, Quad Cab 2WD, Quad Cab 4WD, Regular Cab 2WD, Regular Cab 4WD, Regular Cab 8FT BOX 2WD, Regular Cab 8FT BOX 4WD, Regular Cab Chassis 2WD, Regular Cab Chassis 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, SLT Quad Cab 2WD, SLT Quad Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Quad Cab 2WD, ST Quad Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD | 10 Cyl 8.0L, 6 Cyl 5.9L Diesel, 6 Cyl 6.7L Diesel, 8 Cyl 5.2L, 8 Cyl 5.9L
View related parts
Dodge Ram 2500 Lever-Clutch Release
Part Number: 52107555
$46.60 MSRP: $66.95
You Save: $20.35 (31%)
ADD TO CART
Product Specifications
- Other Name: Lever Clutch Release
- Replaced by: 52107555AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2008 Dodge Ram 2500 | 3-Person Cab 2WD, 3-Person Cab 4WD, Club Cab 2WD, Club Cab 4WD, Club Cab 6FT BOX 2WD, Club Cab 6FT BOX 4WD, Club Cab 8FT BOX 2WD, Club Cab 8FT BOX 4WD, Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, Laramie Quad Cab 2WD, Laramie Quad Cab 4WD, Laramie Regular Cab 2WD, Laramie Regular Cab 4WD, Mega Cab 2WD, Mega Cab 4WD, Quad Cab 2WD, Quad Cab 4WD, Regular Cab 2WD, Regular Cab 4WD, Regular Cab 8FT BOX 2WD, Regular Cab 8FT BOX 4WD, Regular Cab Chassis 2WD, Regular Cab Chassis 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, SLT Quad Cab 2WD, SLT Quad Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Quad Cab 2WD, ST Quad Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD | 10 Cyl 8.0L, 6 Cyl 5.9L Diesel, 8 Cyl 5.2L, 8 Cyl 5.7L, 8 Cyl 5.9L

Dodge Ram 2500 Clutch Fork

In Dodge Ram 2500 models the Clutch Fork operates as a vital element in manual transmissions which allows drivers to activate and deactivate the clutch mechanism. A driver pressing the clutch pedal activates the Clutch Fork which uses the release bearing to push against the pressure plate thus creating a smooth gear shift process. Modern automotive vehicles mainly utilize clutch linkage systems through hydraulic mechanisms and mechanical counterparts while the hydraulic systems prevail because of their self-adjusting characteristics and flexibility. Simpler mechanical cable and pushrod linkages run the system without automated adjustments. Among various Dodge Clutch Fork design types the linkage system determines specific products so that hydraulic systems merge Ram 2500 Clutch Fork functions into concentric slave cylinders to eliminate separate clutches. The Dodge Ram 2500 Clutch Fork plays a vital role in keeping your vehicle operating smoothly because its failure causes either shifting problems or total clutch breakdowns.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Ram 2500 Clutch Fork at great affordable prices. Moreover, all genuine Dodge Ram 2500 Clutch Fork come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Ram 2500 Clutch Fork Parts Questions & Experts Answers

Lever-Clutch Release
52087515
Q: How to remove Pressure Plate,Release Bearing and Clutch Fork on Dodge Ram 2500?
A:
To remove the clutch components, begin by raising and securely supporting the vehicle on jack stands. Disconnect the clutch release cylinder from the clutch housing without disconnecting the hydraulic fluid line. Proceed to remove the transmission, leaving the clutch fork and release bearing attached to the clutch housing. To support the clutch disc during removal, insert a clutch alignment tool through the clutch disc hub. Inspect the flywheel and pressure plate for indexing marks; if absent, create your own to ensure proper alignment during installation. Gradually loosen the pressure plate-to-flywheel bolts in a criss-cross pattern and remove them along with the pressure plate and clutch disc. Inspect all components, including the flywheel for defects, clutch disc for wear or damage, release bearing for replacement, and pressure plate for wear or damage. Clean the surfaces thoroughly and reinstall the flywheel. Align the clutch disc and pressure plate with an alignment tool and finger-tighten the pressure plate-to-flywheel bolts. Center the clutch disc using the alignment tool, then gradually tighten the bolts in a criss-cross pattern to the specified torque. Remove the alignment tool, lubricate the release bearing and related parts with high-temperature grease, reinstall the clutch release bearing if removed, and proceed to reinstall the transmission and all previously removed components. Finally, lower the vehicle.