My Garage
My Account
Cart
Genuine Dodge Ram 3500 Hood
Engine Hood- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
8 Hoods found
Dodge Ram 3500 Hood Panel Assembly
Part Number: 55275733AF$680.58 MSRP: $995.00You Save: $314.42 (32%)
Dodge Ram 3500 Hood Primered Truck
Part Number: 55275733AD$680.58 MSRP: $995.00You Save: $314.42 (32%)
Dodge Ram 3500 Hood Panel Assembly
Part Number: 55275733AB$680.58 MSRP: $995.00You Save: $314.42 (32%)
Dodge Ram 3500 Hood
The Dodge Ram 3500 Hood protects the engine while allowing easy access to conduct routine checks. Over the years, truck drivers have relied on a Hood hinged at the front that opens upwards and allows easy access to belts, fluids, and filters. The Hood has been made of solid steel in early generations but is now offered in lighter aluminum or impact-resistant fiberglass. Additionally, the Hood is a crumple zone that helps absorb the energy of a crash and lessen the force that travels through the cabin. Every Dodge owner can take advantage of this safety feature while also permitting Ram 3500 to draw on a varied selection of materials for strength-to-weight gains. Although there are differences in design and shape, the core objective remains the same to seal off rain, road debris, and grime that could damage sensitive engine components. Dodge's recent designs have the same sculpted profile as current Dodge models that channel airflow over the windshield. Meanwhile, an older Ram 3500 might feature flatter contours, yet both designs maintain tight weather stripping, allowing the Hood to sit securely even on rough terrain. And, of course, every Dodge fan loves how the Hood's styling complements the bold grille.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Ram 3500 Hood at great affordable prices. Moreover, all genuine Dodge Ram 3500 Hood come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Ram 3500 Hood Parts Questions & Experts Answers
- Q: How to properly remove and install hood on Dodge Ram 3500?A:Use blankets or pads to cover the cowl area of the body and Fenders to protect the body and paint as the hood is lifted off. Make marks or scribe a line around the Hood Hinges to ensure proper alignment during installation. Disconnect any cables or wires that will interfere with removal. Have an assistant support one side of the hood while you support the other. Simultaneously remove the hinge-to-hood nuts and lift off the hood with the help of an assistant. Installation is the reverse of removal. Fore-and-aft and side-to-side adjustment of the hood is done by moving the hinge plate slot after loosening the bolts or nuts. Mark around the each hinge plate so you can determine the amount of movement. Loosen the bolts or nuts and move the hood into correct alignment. Move it only a little at a time. Tighten the hinge bolts and carefully lower the hood to check the position. If necessary after installation, the Hood Latch can be adjusted up and-down as well as from side-to-side on the radiator support so the hood closes securely and flush with the fenders. To make the adjustment scribe a line or mark around the hood latch mounting bolts to provide a reference point, then loosen them and reposition the latch as necessary. Finally, adjust the hood bumpers on the radiator support so the hood, when closed, is flush with the fenders. The hood latch assembly, as well as the hinges, should be periodically lubricated with white, lithium-base grease to prevent binding and wear.
