My Garage
My Account
Cart
Genuine Dodge Ramcharger EGR Valve
Emissions EGR Valve- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
9 EGR Valves found
Dodge Ramcharger EGR Valve
The EGR Valve in Dodge Ramcharger vehicles is important to control the flow of the exhaust gases back into the combustion chamber thus reducing on air pollutants in the atmosphere in instance where the air-fuel ratio is not ideal. This type of valve aims at reducing Nitrogen oxide (NOx) emission by utilizing exhausted gas recirculation, which involves invent gases that can absorb combustion heat, therefore limiting high temperatures that lead to forming of NOx. Dodge Ramcharger EGR Valves have substantially changed from simple orifice jets to complicated valves that depend on different conditions including coolant temperature and manifold vacuum. Some models could use backpressure transducers in order to control flow of exhaust gases that are used in EGR depending on the load of the engine. As for EGR technology it is evident that it helps to meet emissions requirements, however it is critical to know that EGR Valves may lead to carbon build up that might affect the function in Dodge Ramcharger vehicles.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Ramcharger EGR Valve at great affordable prices. Moreover, all genuine Dodge Ramcharger EGR Valve come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Dodge Ramcharger EGR Valve Parts Questions & Experts Answers
- Q:Where is the EGR valve located, and How to check its functionality on Dodge Ramcharger?A:On Dodge and Plymouth vehicles, the EGR valve is mounted on the intake manifold right by carburetor and problems with this branch of emissions system originate from a stuck or severely rusted EGR valve. To check the valve, the engine should be off and cold to avoid burns, after thus, one should reach under the EGR valve and push the diaphragm with some pressure such that it can move up and down within the housing. Switch off the hose connected to the valve, then start the engine and use mouth or a hand vacuum pump to apply vacuum to the hose; when the engine stalls or runs roughly when vacuum is applied, then the EGR valve is properly working. However, if the diaphragm does not move or moves only with considerable effort, it is better to replace the EGR valve, and in the case of doubt as to whether the valve is defective, one should follow its movement with respect to a new valve at a nearby auto parts store.
