How to Remove a Headlight Switch?

To remove the cluster face plate, first remove the left air-conditioning duct if necessary. Then, reach under the instrument panel and depress the stem and knob release button on the bottom of the switch housing. Pull the knob and stem assembly out of the switch housing. For later model vehicles, remove the wiper switch knob and bezel. Remove the switch spanner nut from the front of the instrument panel. Reach under the instrument panel and maneuver the switch down to disconnect the electrical leads. Finally, remove the switch. The installation process is the reverse of removal.

Genuine Dodge Ramcharger Headlight Switch

Headlamp Switch

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

3 Headlight Switches found

View related parts
Dodge Ramcharger Switch-Multifunction
Part Number: 4728424
- Other Name: Switches
More Info
Fits the following Vehicles:
1990-1993 Dodge Ramcharger | Sport Utility 2WD, Sport Utility 4WD | 6 Cyl 3.9L, 6 Cyl 5.9L Diesel, 8 Cyl 5.2L, 8 Cyl 5.9L
Less Info
View related parts
Dodge Ramcharger Switch HEADLAMP Select
Part Number: 4360143
- Other Name: Switch, Headlamp Selector; Headlamp Dimmer Switch
More Info
Fits the following Vehicles:
1986-1993 Dodge Ramcharger | Sport Utility 2WD, Sport Utility 4WD | 6 Cyl 3.7L, 6 Cyl 3.9L, 6 Cyl 5.9L Diesel, 8 Cyl 5.2L, 8 Cyl 5.9L, All Engines
Less Info
View related parts
Dodge Ramcharger Switch-Head Lamp Beam SEL (Tilt)
Part Number: 4373418
- Other Name: Switch, Headlamp Selector; Dimmer Switch, Headlamp Dimmer Switch
More Info
Fits the following Vehicles:
1988-1993 Dodge Ramcharger | Sport Utility 2WD, Sport Utility 4WD | 6 Cyl 3.9L, 6 Cyl 5.9L Diesel, 8 Cyl 5.2L, 8 Cyl 5.9L, All Engines
Less Info

Dodge Ramcharger Headlight Switch Parts Questions & Answers

Switch-Multifunction
4728424
Q: How to Remove a Headlight Switch?
A: To remove the cluster face plate, first remove the left air-conditioning duct if necessary. Then, reach under the instrument panel and depress the stem and knob release button on the bottom of the switch housing. Pull the knob and stem assembly out of the switch housing. For later model vehicles, remove the wiper switch knob and bezel. Remove the switch spanner nut from the front of the instrument panel. Reach under the instrument panel and maneuver the switch down to disconnect the electrical leads. Finally, remove the switch. The installation process is the reverse of removal.