How to Replace the Pump and Reservoir Assembly on Dodge Ramcharger?

To replace the pump and reservoir assembly, start by pumping or siphoning the liquid from the reservoir. Then, disconnect the pump ground wire and remove the mounting screws to take off the reservoir and pump assembly. Next, disconnect the electrical leads and water hoses from the bottom of the pump. Use a socket and extension to remove the nut and plastic washer through the reservoir filler neck. Separate the pump from the bottom of the reservoir and discard the rubber grommet. Installation is the reverse of removal, ensuring that a new grommet is used on the reservoir.

Genuine Dodge Ramcharger Washer Pump

Windshield Washer Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Washer Pump found

View related parts
Dodge Ramcharger Motor-W/WASHER Reservoir-Black-W
Part Number: 4762319
Product Specifications
- Other Name: Pump, Washer
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1984-1985 Dodge Ramcharger | 6 Cyl 3.7L, 8 Cyl 5.2L, 8 Cyl 5.9L

Dodge Ramcharger Washer Pump

The Dodge Ramcharger Washer Pump provides pressurized washer fluid to the windshield nozzles, allowing the driver to rapidly clear dirt, bugs, and debris to see the road safely. The Washer Pump is positioned next to the reservoir and is activated once the switch is pulled on the steering. A small impeller draws fluid through a hose and sends it to the nozzles. Early models of the Ramcharger applied a basic two-wire motor, while later Dodge versions maintained this system but added more robust seals for additional reliability without affecting operation. The compact Washer Pump snaps into the reservoir base and can be swapped in minutes with common tools, regardless of year. An indication that a Washer Pump is faulty and requires replacement is a whine, leak, and failure to spray. The cost to repair the system remains affordable, as a replacement pump for Dodge models is typically budget-friendly, and installation costs are also reasonably manageable. The Washer Pump of a Ramcharger windshield must function properly to enable the device to work. The proven Dodge setup meets that requirement every day.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Dodge Ramcharger Washer Pump at great affordable prices. Moreover, all genuine Dodge Ramcharger Washer Pump come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Dodge Ramcharger Washer Pump Parts Questions & Experts Answers

Motor-W/WASHER Reservoir-Black-W
4762319
Q: How to Replace the Pump and Reservoir Assembly on Dodge Ramcharger?
A:
To replace the pump and reservoir assembly, start by pumping or siphoning the liquid from the reservoir. Then, disconnect the pump ground wire and remove the mounting screws to take off the reservoir and pump assembly. Next, disconnect the electrical leads and water hoses from the bottom of the pump. Use a socket and extension to remove the nut and plastic washer through the reservoir filler neck. Separate the pump from the bottom of the reservoir and discard the rubber grommet. Installation is the reverse of removal, ensuring that a new grommet is used on the reservoir.

Related Dodge Ramcharger Parts

Browse by Year

1985 Washer Pump 1984 Washer Pump