What is the recommended process for performing a valve job on the Exhaust Valve and Intake Valve and preparing the cylinder head for reinstallation on Jeep Cherokee?

Because of the complex nature of the job and the special tools and equipment needed, servicing of the valves, the valve seats and the valve guides, commonly known as a valve job, should be done by a professional. The home mechanic can remove and disassemble the head(s), do the initial cleaning and inspection, then reassemble and deliver it (or them) to a dealer service department or an automotive machine shop for the actual service work. Doing the inspection will enable you to see what condition the head and valve train components are in and will ensure that you know what work and new parts are required when dealing with an automotive machine shop. The dealer service department, or automotive machine shop, will remove the valves and springs, recondition or replace the valves and valve seats, recondition the valve guides, check and replace the valve springs, spring retainers or rotators and keepers (as necessary), replace the valve seals with new ones, reassemble the valve components and make sure the installed spring height is correct. The cylinder head gasket surface will also be resurfaced if it's warped. After the valve job has been performed by a professional, the head will be in like-new condition. When the head is returned, be sure to clean it again before installation on the engine to remove any metal particles and abrasive grit that may still be present from the valve service or head resurfacing operations. Use compressed air, if available, to blow out all the oil holes and passages.

Genuine Jeep Cherokee Exhaust Valve

Exhaust Muffler Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Exhaust Valves found

View related parts
Jeep Cherokee Engine Exhaust Valve
Part Number: 68453300AA
$19.81 MSRP: $28.35
You Save: $8.54 (31%)
ADD TO CART
Product Specifications
- Other Name: Valve-Engine Exhaust; Valve
- Replaces: 5047447AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2023 Jeep Cherokee | Latitude AWD, Latitude FWD, Latitude Plus AWD, Latitude Plus FWD, Limited AWD, Limited FWD, Overland AWD, Overland FWD, Sport AWD, Sport FWD, Trailhawk AWD | 4 Cyl 2.4 L GAS, 4 Cyl 2.4L
View related parts
Jeep Cherokee Exhaust Valve
Part Number: 5184128AE
$23.65 MSRP: $34.25
You Save: $10.60 (31%)
ADD TO CART
Product Specifications
- Other Name: Valve Exhaust Standard; Exhaust Valve
- Replaces: 5184128AD, 5184128AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2022 Jeep Cherokee | Latitude AWD, Latitude FWD, Latitude Lux AWD, Latitude Lux FWD, Latitude Plus AWD, Latitude Plus FWD, Limited AWD, Limited FWD, Overland AWD, Overland FWD, Sport AWD, Sport FWD, Trailhawk AWD | 6 Cyl 3.2 L GAS, 6 Cyl 3.2L
View related parts
Jeep Cherokee Exhaust Valve
Part Number: 5047447AA
$19.81 MSRP: $28.35
You Save: $8.54 (31%)
ADD TO CART
Product Specifications
- Other Name: Valve Exhaust Standard
- Replaced by: 68453300AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2019 Jeep Cherokee | Latitude AWD, Latitude FWD, Latitude Plus AWD, Latitude Plus FWD, Limited AWD, Limited FWD, Overland AWD, Overland FWD, Sport AWD, Sport FWD, Trailhawk AWD | 4 Cyl 2.4L
View related parts
Jeep Cherokee Engine Exhaust Valve
Part Number: 5048262AA
$39.61 MSRP: $57.05
You Save: $17.44 (31%)
ADD TO CART
Product Specifications
- Other Name: Valve-Engine Exhaust; Exhaust Valve, Valve
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2019-2023 Jeep Cherokee | Latitude AWD, Latitude FWD, Latitude Lux AWD, Latitude Lux FWD, Latitude Plus AWD, Latitude Plus FWD, Limited AWD, Limited FWD, Overland AWD, Overland FWD, Trailhawk AWD | 4 Cyl 2.0 L GAS, 4 Cyl 2.0L
View related parts
Jeep Cherokee Exhaust Valve
Part Number: 53010513AA
Product Specifications
- Other Name: Valve Exhaust Standard; Exhaust Valve, Valve
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2001 Jeep Cherokee | Classic 4 Door 2WD, Classic 4 Door 4WD, Limited 4 Door 2WD, Limited 4 Door 4WD, SE 2 Door 2WD, SE 2 Door 4WD, SE 4 Door 2WD, SE 4 Door 4WD, SE RHD 4 Door 2WD, SE RHD 4 Door 4WD, Sport 2 Door 2WD, Sport 2 Door 4WD, Sport 4 Door 2WD, Sport 4 Door 4WD | 4 Cyl 2.5L, 6 Cyl 4.0L
- 1998 Jeep Cherokee | 2 Door Sport Utility 2WD, 2 Door Sport Utility 4WD, 4 Door Sport Utility 2WD, 4 Door Sport Utility 4WD, 4 Door Sport Utility RHD 2WD, 4 Door Sport Utility RHD 4WD | 6 Cyl 4.0L

Jeep Cherokee Exhaust Valve

The Exhaust Valve is applied for the Jeep Cherokee automobiles to control overheating as it helps remove burning gases from the engine cylinder. It is imperative to be performed routinely in order to ensure that the engines are running at their optimal most of the time. When it comes to the operation of the Exhaust Valve, it plays a vital role of avoiding things such as, little power at the engine, misfire, rough functionality at idle, and poor fuel efficiency. There has been the use of different forms of Exhaust Valves in the Jeep Cherokee models in a bid to improve the performance of the engines. These valves may also differ in material and construction and therefore their difference may manifest themselves through efficiency and performance. But, when it is damaged, the working of the Jeep Cherokee can be greatly affected hence its importance for it to function correctly.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Cherokee Exhaust Valve at great affordable prices. Moreover, all genuine Jeep Cherokee Exhaust Valve come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Jeep Cherokee Exhaust Valve Parts Questions & Experts Answers

Exhaust Valve
53010513AA
Q: What is the recommended process for performing a valve job on the Exhaust Valve and Intake Valve and preparing the cylinder head for reinstallation on Jeep Cherokee?
A:
Because of the complex nature of the job and the special tools and equipment needed, servicing of the valves, the valve seats and the valve guides, commonly known as a valve job, should be done by a professional. The home mechanic can remove and disassemble the head(s), do the initial cleaning and inspection, then reassemble and deliver it (or them) to a dealer service department or an automotive machine shop for the actual service work. Doing the inspection will enable you to see what condition the head and valve train components are in and will ensure that you know what work and new parts are required when dealing with an automotive machine shop. The dealer service department, or automotive machine shop, will remove the valves and springs, recondition or replace the valves and valve seats, recondition the valve guides, check and replace the valve springs, spring retainers or rotators and keepers (as necessary), replace the valve seals with new ones, reassemble the valve components and make sure the installed spring height is correct. The cylinder head gasket surface will also be resurfaced if it's warped. After the valve job has been performed by a professional, the head will be in like-new condition. When the head is returned, be sure to clean it again before installation on the engine to remove any metal particles and abrasive grit that may still be present from the valve service or head resurfacing operations. Use compressed air, if available, to blow out all the oil holes and passages.