What is the recommended process for performing a valve job on the Exhaust Valve and Intake Valve and preparing the cylinder head for reinstallation on Jeep Cherokee?

Because of the complex nature of the job and the special tools and equipment needed, servicing of the valves, the valve seats and the valve guides, commonly known as a valve job, should be done by a professional. The home mechanic can remove and disassemble the head(s), do the initial cleaning and inspection, then reassemble and deliver it (or them) to a dealer service department or an automotive machine shop for the actual service work. Doing the inspection will enable you to see what condition the head and valve train components are in and will ensure that you know what work and new parts are required when dealing with an automotive machine shop. The dealer service department, or automotive machine shop, will remove the valves and springs, recondition or replace the valves and valve seats, recondition the valve guides, check and replace the valve springs, spring retainers or rotators and keepers (as necessary), replace the valve seals with new ones, reassemble the valve components and make sure the installed spring height is correct. The cylinder head gasket surface will also be resurfaced if it's warped. After the valve job has been performed by a professional, the head will be in like-new condition. When the head is returned, be sure to clean it again before installation on the engine to remove any metal particles and abrasive grit that may still be present from the valve service or head resurfacing operations. Use compressed air, if available, to blow out all the oil holes and passages.

Genuine Jeep Cherokee Intake Valve

Engine Intake Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Intake Valves found

View related parts
Jeep Cherokee Intake Valve
Part Number: 5047446AA
$18.00 MSRP: $26.10
You Save: $8.10 (32%)
ADD TO CART
Product Specifications
- Other Name: Valve Intake Standard
- Replaced by: 68453301AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2019 Jeep Cherokee | Latitude AWD, Latitude FWD, Latitude Plus AWD, Latitude Plus FWD, Limited AWD, Limited FWD, Overland AWD, Overland FWD, Sport AWD, Sport FWD, Trailhawk AWD | 4 Cyl 2.4L
View related parts
Jeep Cherokee Engine Intake
Part Number: 68453301AA
$18.00 MSRP: $26.10
You Save: $8.10 (32%)
ADD TO CART
Product Specifications
- Other Name: Valve
- Replaces: 5047446AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2023 Jeep Cherokee | Latitude AWD, Latitude FWD, Latitude Plus AWD, Latitude Plus FWD, Limited AWD, Limited FWD, Overland AWD, Overland FWD, Sport AWD, Sport FWD, Trailhawk AWD | 4 Cyl 2.4 L GAS, 4 Cyl 2.4L
View related parts
Jeep Cherokee Intake Valve
Part Number: 68088019AA
$11.77 MSRP: $17.00
You Save: $5.23 (31%)
ADD TO CART
Product Specifications
- Other Name: Valve Intake Standard; Intake Valve
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2022 Jeep Cherokee | Latitude AWD, Latitude FWD, Latitude Lux AWD, Latitude Lux FWD, Latitude Plus AWD, Latitude Plus FWD, Limited AWD, Limited FWD, Overland AWD, Overland FWD, Sport AWD, Sport FWD, Trailhawk AWD | 6 Cyl 3.2 L GAS, 6 Cyl 3.2L
View related parts
Jeep Cherokee Intake Valve
Part Number: 53010512AA
$27.09 MSRP: $39.05
You Save: $11.96 (31%)
ADD TO CART
Product Specifications
- Other Name: Valve Intake Standard; Intake Valve, Valve
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2001 Jeep Cherokee | 2 Door Sport Utility 2WD, 2 Door Sport Utility 4WD, 4 Door Sport Utility 2WD, 4 Door Sport Utility 4WD, 4 Door Sport Utility RHD 2WD, 4 Door Sport Utility RHD 4WD, Classic 4 Door 2WD, Classic 4 Door 4WD, Limited 4 Door 2WD, Limited 4 Door 4WD, SE 2 Door 2WD, SE 2 Door 4WD, SE 4 Door 2WD, SE 4 Door 4WD, SE RHD 4 Door 2WD, SE RHD 4 Door 4WD, Sport 2 Door 2WD, Sport 2 Door 4WD, Sport 4 Door 2WD, Sport 4 Door 4WD | 4 Cyl 2.5L, 6 Cyl 4.0L
View related parts
Jeep Cherokee Intake Valve
Part Number: 68263242AA
$6.76 MSRP: $9.70
You Save: $2.94 (31%)
ADD TO CART
Product Specifications
- Other Name: Valve-Intake
- Replaced by: 68369573AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2018 Jeep Cherokee | Latitude AWD, Latitude FWD, Latitude Plus AWD, Latitude Plus FWD, Limited AWD, Limited FWD, Overland FWD, Trailhawk AWD
View related parts
Jeep Cherokee Intake Valve
Part Number: 5048155AB
$12.12 MSRP: $17.55
You Save: $5.43 (31%)
Product Specifications
- Other Name: Valve-Intake; Intake Valve, Valve
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2019-2023 Jeep Cherokee | Latitude AWD, Latitude FWD, Latitude Lux AWD, Latitude Lux FWD, Latitude Plus AWD, Latitude Plus FWD, Limited AWD, Limited FWD, Overland AWD, Overland FWD, Trailhawk AWD | 4 Cyl 2.0 L GAS, 4 Cyl 2.0L
View related parts
Jeep Cherokee Intake
Part Number: 4720146
Product Specifications
- Other Name: Valve Intake Standard
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Jeep Cherokee | 2 Door Sport Utility 2WD, 2 Door Sport Utility 4WD, 4 Door Sport Utility 2WD, 4 Door Sport Utility 4WD, 4 Door Sport Utility RHD 4WD, SE 2 Door 2WD, SE 2 Door 4WD, SE 4 Door 2WD, SE 4 Door 4WD | 4 Cyl 2.5L Diesel
View related parts
Jeep Cherokee Valve Intake
Part Number: 33003575
Product Specifications
- Other Name: Valve, Intake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987-1998 Jeep Cherokee | 2 Door Sport Utility 2WD, 2 Door Sport Utility 4WD, 2 Door Sport Utility RHD 2WD, 2 Door Sport Utility RHD 4WD, 4 Door Sport Utility 2WD, 4 Door Sport Utility 4WD, 4 Door Sport Utility RHD 2WD, 4 Door Sport Utility RHD 4WD | 4 Cyl 2.5L, 6 Cyl 4.0L
View related parts
Jeep Cherokee Valve Intake
Part Number: 33003519
Product Specifications
- Other Name: Valve, Intake
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987-1998 Jeep Cherokee | 2 Door Sport Utility 2WD, 2 Door Sport Utility 4WD, 2 Door Sport Utility RHD 2WD, 2 Door Sport Utility RHD 4WD, 4 Door Sport Utility 2WD, 4 Door Sport Utility 4WD, 4 Door Sport Utility RHD 2WD, 4 Door Sport Utility RHD 4WD | 4 Cyl 2.5L, 6 Cyl 4.0L
View related parts
Jeep Cherokee Seal-Valve
Part Number: T0737124
Product Specifications
- Other Name: Seal
- Replaced by: J0110147
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-1994 Jeep Cherokee | 2 Door Sport Utility 2WD, 2 Door Sport Utility 4WD, 4 Door Sport Utility 2WD, 4 Door Sport Utility 4WD | 4 Cyl 2.1L Diesel
View related parts
Jeep Cherokee Intake Valve
Part Number: 33003515
Product Specifications
- Other Name: Valve, Intake; Intake Valve, Valve
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987-1999 Jeep Cherokee | 2 Door Sport Utility 2WD, 2 Door Sport Utility 4WD, 2 Door Sport Utility RHD 2WD, 2 Door Sport Utility RHD 4WD, 4 Door Sport Utility 2WD, 4 Door Sport Utility 4WD, 4 Door Sport Utility RHD 2WD, 4 Door Sport Utility RHD 4WD | 4 Cyl 2.5L, 6 Cyl 4.0L

Jeep Cherokee Intake Valve

This paper is going to focus on the Intake Valve used in Jeep Cherokee cars to explain how it can affect the performance of an engine as well as the combustion process. Its the main role is to control the duration of the opening of air and fuel mixture supply into the engine in order to have optimum power. In the event that the Intake Valve becomes damaged, the resulting outcomes include poor combustion or even reduction of power within an engine and therefore a replacement of the Intake Valve is often important so as not to require expensive repair services. Intake Valves on Jeep Cherokee models have for the many years been developed in different styles to cater for certain performances. The replacement process of damaged Intake Valves require certain tools such as valve spring compressor and retainers. This paper has also emphasized the need to install certain parts including the Intake Valve properly in order to preserve the engines and avoid any issues in the future with regard to Jeep Cherokee vehicles.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Cherokee Intake Valve at great affordable prices. Moreover, all genuine Jeep Cherokee Intake Valve come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Jeep Cherokee Intake Valve Parts Questions & Experts Answers

Intake Valve
53010512AA
Q: What is the recommended process for performing a valve job on the Exhaust Valve and Intake Valve and preparing the cylinder head for reinstallation on Jeep Cherokee?
A:
Because of the complex nature of the job and the special tools and equipment needed, servicing of the valves, the valve seats and the valve guides, commonly known as a valve job, should be done by a professional. The home mechanic can remove and disassemble the head(s), do the initial cleaning and inspection, then reassemble and deliver it (or them) to a dealer service department or an automotive machine shop for the actual service work. Doing the inspection will enable you to see what condition the head and valve train components are in and will ensure that you know what work and new parts are required when dealing with an automotive machine shop. The dealer service department, or automotive machine shop, will remove the valves and springs, recondition or replace the valves and valve seats, recondition the valve guides, check and replace the valve springs, spring retainers or rotators and keepers (as necessary), replace the valve seals with new ones, reassemble the valve components and make sure the installed spring height is correct. The cylinder head gasket surface will also be resurfaced if it's warped. After the valve job has been performed by a professional, the head will be in like-new condition. When the head is returned, be sure to clean it again before installation on the engine to remove any metal particles and abrasive grit that may still be present from the valve service or head resurfacing operations. Use compressed air, if available, to blow out all the oil holes and passages.