How to replace exterior lights and Fog Light Bulb on Jeep Grand Cherokee?

To replace exterior lights, first disconnect the cable from the negative battery terminal. For front park/turn signal/sidemarker light bulbs, if equipped, remove the front lamp unit top cover and, if necessary, the headlight housing to access the connectors. Disconnect the electrical connector from the socket, remove the bulb socket by rotating it counterclockwise, and pull the bulb straight out. To install a new bulb, push it straight into the socket until it seats fully. For fog light bulbs, disconnect the electrical connector by prying the locking tabs, remove the socket by rotating it counterclockwise, and pull the bulb straight out. Installation is the reverse of removal. For the center high-mounted brake light bulb in 2010 and earlier models, remove the housing mounting fasteners, disconnect the electrical connector and wiper fluid hose, and replace the assembly if defective. In 2011 and later models, open the liftgate, remove the trim panel, disconnect the window washer hose, and lift the spoiler to access the electrical connector and mounting fasteners. For taillight bulbs, open the liftgate, remove the push-pin fasteners, disconnect the electrical connectors, rotate the socket to remove it, and pull the bulb straight out. For the license plate light bulb, reach under the liftgate handle to access the latch tab, pull the lens down, and remove the bulb. For interior lights, carefully pry the reading light lens away from the console, remove the reflector shield, and pull the bulb straight down to replace it. For vanity light bulbs, pry the lens from the visor, unsnap the bulb from the holders, and press a new bulb into place. For the instrument panel courtesy light, unsnap the lens, pull the bulb base straight out, and insert a new bulb until fully seated. Installation for all components is generally the reverse of removal.

Genuine Jeep Grand Cherokee Fog Light Bulb

Fog Lamp Bulb

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Fog Light Bulbs found

View related parts
Jeep Grand Cherokee Bulb
Part Number: L0009145
$25.03 MSRP: $36.70
You Save: $11.67 (32%)
ADD TO CART
Product Specifications
- Other Name: Bulb 9145; Fog Lamp Bulb
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Jeep Grand Cherokee | Laredo 2WD, Laredo 4WD, Limited 2WD, Limited 4WD, Overland 2WD, Overland 4WD, SRT8 4WD | 6 Cyl 3.0L Diesel, 6 Cyl 3.7L, 8 Cyl 4.7L, 8 Cyl 5.7L, 8 Cyl 6.1L
View related parts
Jeep Grand Cherokee Bulb
Part Number: L0007440
$10.89 MSRP: $15.80
You Save: $4.91 (32%)
ADD TO CART
Product Specifications
- Other Name: Bulb 7440/W21W
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2020 Jeep Grand Cherokee | Laredo 2WD, Laredo 4WD, Laredo AWD, Laredo RWD, Limited 2WD, Limited 4WD, Limited AWD, Limited RWD, Overland 2WD, Overland 4WD, Overland AWD, Overland RWD, SRT AWD, SRT8 4WD, Summit AWD, Summit RWD, Trackhawk AWD, Trailhawk AWD | 6 Cyl 3.0L Diesel, 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Jeep Grand Cherokee Headlamp Bulb
Part Number: L0000H11
$33.79 MSRP: $48.35
You Save: $14.56 (31%)
ADD TO CART
Product Specifications
- Other Name: Bulb-Headlamp; Fog Lamp Bulb, Lower Beam Bulb
- Replaced by: 68604860AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2021 Jeep Grand Cherokee | Laredo 2WD, Laredo 4WD, Laredo AWD, Laredo RWD, Limited 2WD, Limited 4WD, Limited AWD, Limited RWD, Overland 2WD, Overland 4WD, Overland AWD, Overland RWD, SRT AWD, SRT8 4WD, Summit AWD, Summit RWD, Trackhawk AWD, Trailhawk AWD | 6 Cyl 3.0L Diesel, 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Jeep Grand Cherokee Bulb
Part Number: L000PSX24W
$56.81 MSRP: $84.20
You Save: $27.39 (33%)
ADD TO CART
Product Specifications
- Other Name: Bulb PSX24W; Fog Lamp Bulb
- Replaced by: L0PSX24W
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Jeep Grand Cherokee | Laredo 2WD, Laredo 4WD, Limited 2WD, Limited 4WD, Overland 2WD, Overland 4WD, SRT AWD, SRT8 4WD, Summit AWD, Summit RWD | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.4L
View related parts
Jeep Grand Cherokee Lamp Assembly-Fr Fog
Part Number: 68447904AC
$110.42 MSRP: $164.00
You Save: $53.58 (33%)
ADD TO CART
Product Specifications
- Other Name: Fog Lamp Assembly, Fog Lamp Bulb
- Replaces: 68447904AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2025 Jeep Grand Cherokee | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS
View related parts
Jeep Grand Cherokee Bulb-Fog Lamp
Part Number: L0009040
$11.14 MSRP: $12.85
You Save: $1.71 (14%)
ADD TO CART
Product Specifications
- Other Name: Bulb Fog Lamp 50 Watt; Bulb, Fog Lamp Bulb
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003 Jeep Grand Cherokee | Laredo 2WD, Laredo 4WD, Limited 2WD, Limited 4WD, Sport 2WD, Sport 4WD | 6 Cyl 4.0L, 8 Cyl 4.7L

Jeep Grand Cherokee Fog Light Bulb

The Fog Light Bulbs in Jeep Grand Cherokee cars play very important function in ensuring improved illumination during some weather conditions like fogginess, rainfall or even during snowing. These bulbs may be either normal or high beams that enable the driver to use them depending on the condition prevailing in the road. Speaking of Fog Light Bulbs there can be mentioned different generations of Jeep Grand Cherokee where different types of bulbs were used due to the new technologies that appeared on the market. The key difference between these bulbs is the power and brightness, and if an individual goes for powerful bulbs, then these will offer better results in specific zones. In general, the Fog Light Bulbs in Jeep Grand Cherokee models are necessary to avoid adverse weather conditions on the road.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Grand Cherokee Fog Light Bulb at great affordable prices. Moreover, all genuine Jeep Grand Cherokee Fog Light Bulb come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Jeep Grand Cherokee Fog Light Bulb Parts Questions & Experts Answers

Headlamp Bulb
L0000H11
Q: How to replace exterior lights and Fog Light Bulb on Jeep Grand Cherokee?
A:
To replace exterior lights, first disconnect the cable from the negative battery terminal. For front park/turn signal/sidemarker light bulbs, if equipped, remove the front lamp unit top cover and, if necessary, the Headlight housing to access the connectors. Disconnect the electrical connector from the socket, remove the bulb socket by rotating it counterclockwise, and pull the bulb straight out. To install a new bulb, push it straight into the socket until it seats fully. For fog light bulbs, disconnect the electrical connector by prying the locking tabs, remove the socket by rotating it counterclockwise, and pull the bulb straight out. Installation is the reverse of removal. For the center high-mounted brake light bulb in 2010 and earlier models, remove the housing mounting fasteners, disconnect the electrical connector and wiper fluid hose, and replace the assembly if defective. In 2011 and later models, open the liftgate, remove the trim panel, disconnect the window washer hose, and lift the spoiler to access the electrical connector and mounting fasteners. For taillight bulbs, open the liftgate, remove the push-pin fasteners, disconnect the electrical connectors, rotate the socket to remove it, and pull the bulb straight out. For the license plate light bulb, reach under the liftgate handle to access the latch tab, pull the lens down, and remove the bulb. For interior lights, carefully pry the reading light lens away from the console, remove the reflector shield, and pull the bulb straight down to replace it. For vanity light bulbs, pry the lens from the visor, unsnap the bulb from the holders, and press a new bulb into place. For the instrument panel courtesy light, unsnap the lens, pull the bulb base straight out, and insert a new bulb until fully seated. Installation for all components is generally the reverse of removal.