My Garage
My Account
Cart
Genuine Jeep Grand Cherokee Hood Latch
Engine Hood Latch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
12 Hood Latches found
Jeep Grand Cherokee Hood Latch
Hood Latch in Jeep Grand Cherokee automobiles is a very important part because it keeps the hood closed not to open suddenly while the automobile is in use. This component is well placed under the front of the hood such that the important car components such as the engine, the radiator, and the battery are effectively shielded while operating the car. In the different jeep grand Cherokee models, different kinds of hood latch have been used over the years in efforts to improve on safety and durability. It is worth to notice that despite the fact that the exact differences between these styles are not described, the main process stays the same and is aimed at making the hood secure properly. The Hood Latch is an other feature that is important in the operations and safety of a Jeep Grand Cherokee.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Grand Cherokee Hood Latch at great affordable prices. Moreover, all genuine Jeep Grand Cherokee Hood Latch come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Jeep Grand Cherokee Hood Latch Parts Questions & Experts Answers
- Q: How to replace the front hood cable and hood latch on Jeep Grand Cherokee?A:For the replacement of the latch, it is first necessary to mark around the latch to help re-install it, then un-bolt the latch from the radiator support and take out the latch. Pull the hood release cable back and take it out of the slot present on the back of the latch assembly. For installation remove the whole process in the reverse order, and set the latch in a way that hood engages shut when closed and the Bumpers should be slightly squeezed. To remove the cable, one has to first release the hood latch before disconnecting the cable from it. Lie the new cable behind the existing one and then join a length of wire at the end of the cabled at engine bay to aid in pulling the new cable back to the engine bay. Disconnect the cable from all the retaining clips in the engine compartment if possible trim some of the clips. Under the Instrument panel, unscrew the hood release handle, take out the grommet to free the cable and pass through the firewall and into the cab. Pull the wire out of the old cable and connect it to the new cable by making sure the new cable come with a grommet. Route the new cable through the firewall and into the engine compartment and install the grommet. To complete the installation reverse all the steps taken to remove the program.
Related Jeep Grand Cherokee Parts
Jeep Grand Cherokee Air Deflector
Jeep Grand Cherokee Grille
Jeep Grand Cherokee Hood
Jeep Grand Cherokee Hood Hinge
Jeep Grand Cherokee Hood Cable
Browse by Year
2025 Hood Latch 2024 Hood Latch 2023 Hood Latch 2022 Hood Latch 2021 Hood Latch 2020 Hood Latch 2019 Hood Latch 2018 Hood Latch 2017 Hood Latch 2016 Hood Latch 2015 Hood Latch 2014 Hood Latch 2013 Hood Latch 2012 Hood Latch 2011 Hood Latch 2010 Hood Latch 2009 Hood Latch 2008 Hood Latch 2007 Hood Latch 2006 Hood Latch 2005 Hood Latch 2004 Hood Latch 2003 Hood Latch 1998 Hood Latch 1997 Hood Latch 1996 Hood Latch 1995 Hood Latch 1994 Hood Latch 1993 Hood Latch