How to properly remove and install a shock absorber on Jeep Grand Cherokee?

Raise the rear of the vehicle and support it securely on jackstands placed under the frame rails. For models with a solid rear axle, support the rear axle with a floor jack placed under the axle tube on the side being worked on, ensuring not to raise the axle but just support its weight. For models with Independent Rear Suspension, support the outer end of the control arm on the side being worked on with a jack, raising it just enough to support its weight. Remove the fastener(s) that secure the upper end of the shock absorber to the frame or body, applying penetrating oil if the fastener(s) won't loosen due to rust. It may be necessary to remove the two plastic fasteners for the rear fenderwell liner and pull it back to access the upper shock mounting fasteners. For models equipped with a shock solenoid/dampening assembly mounted on the shock absorber, disconnect the electrical connector before removing the absorber, noting how the canister is installed for proper reinstallation. Remove the nut and bolt that attach the lower end of the shock to the axle bracket, applying penetrating oil if the nut is frozen. Extend the new shock absorber as far as possible and install new rubber grommets into the shock absorber eyes if they are not already present. Installation is the reverse of removal, ensuring to tighten the shock absorber mounting fasteners to the specified torque.

Genuine Jeep Grand Cherokee Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

145 Shock Absorbers found

View related parts
Jeep Grand Cherokee Suspension Absorber
Part Number: 68069675AD
$212.63 MSRP: $315.00
You Save: $102.37 (33%)
ADD TO CART
Product Specifications
- Other Name: Shock ABSORBER Kit Suspension Rear; Shock, Shock Absorber
- Replaces: 68069675AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Jeep Grand Cherokee | Laredo 2WD, Laredo 4WD, Limited 2WD, Limited 4WD, Overland 2WD, Overland 4WD, SRT AWD, SRT8 4WD, Summit AWD, Summit RWD | 6 Cyl 3.0L Diesel, 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.4L
View related parts
Jeep Grand Cherokee Suspension Absorber
Part Number: 68069671AE
$107.38 MSRP: $149.00
You Save: $41.62 (28%)
ADD TO CART
Product Specifications
- Other Name: Shock ABSORBER Kit Suspension Rear; Shock, Shock Absorber
- Replaces: 68069671AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2015 Jeep Grand Cherokee | Laredo 2WD, Laredo 4WD, Laredo AWD, Laredo RWD, Limited 2WD, Limited 4WD, Overland 2WD, Overland 4WD, Overland AWD, Overland RWD, SRT AWD, SRT8 4WD, Summit AWD, Summit RWD | 6 Cyl 3.0L Diesel, 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.4L
View related parts
Jeep Grand Cherokee Suspension
Part Number: 68069671AC
$107.38 MSRP: $149.00
You Save: $41.62 (28%)
ADD TO CART
Product Specifications
- Other Name: Shock ABSORBER Kit Suspension Rear
- Replaced by: 68069671AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Jeep Grand Cherokee | Laredo 2WD, Laredo 4WD, Limited 2WD, Limited 4WD, Overland 2WD, Overland 4WD, SRT AWD, SRT8 4WD, Summit AWD, Summit RWD | 6 Cyl 3.0L Diesel, 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.4L
View related parts
Jeep Grand Cherokee Suspension Absorber
Part Number: 68139497AC
$881.10 MSRP: $1360.00
You Save: $478.90 (36%)
ADD TO CART
Product Specifications
- Other Name: Shock ABSORBER Kit Suspension Front
- Replaced by: 68139497AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015 Jeep Grand Cherokee | Laredo 2WD, Laredo 4WD, Laredo AWD, Laredo RWD, Limited 2WD, Limited 4WD, Overland 2WD, Overland 4WD, Overland AWD, Overland RWD, SRT AWD, Summit AWD, Summit RWD | 6 Cyl 3.0L Diesel, 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.4L
- 2012-2013 Jeep Grand Cherokee | Laredo 2WD, Laredo 4WD, Limited 2WD, Limited 4WD, Overland 2WD, Overland 4WD, SRT8 4WD | 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.4L
View related parts
Jeep Grand Cherokee Suspension Absorber
Part Number: 68234048AB
$124.27 MSRP: $174.00
You Save: $49.73 (29%)
ADD TO CART
Product Specifications
- Other Name: Shock ABSORBER Kit Suspension Rear
- Replaces: 68234048AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2015 Jeep Grand Cherokee | Laredo 2WD, Laredo 4WD, Laredo AWD, Laredo RWD, Limited 2WD, Limited 4WD, Overland 2WD, Overland 4WD, Overland AWD, Overland RWD, SRT AWD, Summit AWD, Summit RWD | 6 Cyl 3.0L Diesel, 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.4L
View related parts
Jeep Grand Cherokee Suspension Absorber
Part Number: 68234050AB
$126.58 MSRP: $191.00
You Save: $64.42 (34%)
ADD TO CART
Product Specifications
- Other Name: Shock ABSORBER Kit Suspension Rear; Shock
- Replaces: 68234050AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2015 Jeep Grand Cherokee | Laredo 2WD, Laredo 4WD, Laredo AWD, Laredo RWD, Limited 2WD, Limited 4WD, Overland 2WD, Overland 4WD, Overland AWD, Overland RWD, SRT AWD, Summit AWD, Summit RWD | 6 Cyl 3.0L Diesel, 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.4L
View related parts
Jeep Grand Cherokee Suspension Absorber
Part Number: 68298960AA
$171.00 MSRP: $259.00
You Save: $88.00 (34%)
ADD TO CART
Product Specifications
- Other Name: Shock ABSORBER Kit Suspension Rear; Shock Absorber
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2022 Jeep Grand Cherokee | Laredo AWD, Laredo RWD, Limited AWD, Limited RWD, Overland AWD, Overland RWD, SRT AWD, Summit AWD, Summit RWD, Trackhawk AWD, Trailhawk AWD | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.0L Diesel, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6L, 8 Cyl 5.7 L GAS, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Jeep Grand Cherokee Suspension Absorber
Part Number: 68069675AC
$212.63 MSRP: $315.00
You Save: $102.37 (33%)
ADD TO CART
Product Specifications
- Other Name: Shock ABSORBER Kit Suspension Rear
- Replaced by: 68069675AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011 Jeep Grand Cherokee | Laredo 2WD, Laredo 4WD, Limited 2WD, Limited 4WD, Overland 2WD, Overland 4WD | 6 Cyl 3.6L, 8 Cyl 5.7L
View related parts
Jeep Grand Cherokee Suspension Absorber
Part Number: 68069661AB
$144.00 MSRP: $214.00
You Save: $70.00 (33%)
ADD TO CART
Product Specifications
- Other Name: Shock ABSORBER Kit Suspension Front
- Replaced by: 68069661AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2015 Jeep Grand Cherokee | Laredo 2WD, Laredo 4WD, Laredo AWD, Laredo RWD, Limited 2WD, Limited 4WD, Overland 2WD, Overland 4WD, Overland AWD, Overland RWD, SRT AWD, SRT8 4WD, Summit AWD, Summit RWD | 6 Cyl 3.0L Diesel, 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.4L
View related parts
Jeep Grand Cherokee Suspension Absorber
Part Number: 68069680AH
$552.48 MSRP: $786.00
You Save: $233.52 (30%)
ADD TO CART
Product Specifications
- Other Name: ABSORBER-Suspension; Shock, Shock Mount
- Replaces: 68069680AG, 68069680AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2015 Jeep Grand Cherokee | Laredo 2WD, Laredo 4WD, Laredo AWD, Laredo RWD, Limited 2WD, Limited 4WD, Overland 2WD, Overland 4WD, Overland AWD, Overland RWD, SRT AWD, Summit AWD, Summit RWD | 6 Cyl 3.0L Diesel, 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.4L
View related parts
Jeep Grand Cherokee Suspension Absorber
Part Number: 68069662AB
$118.13 MSRP: $176.00
You Save: $57.87 (33%)
ADD TO CART
Product Specifications
- Other Name: Shock ABSORBER Kit Suspension Front
- Replaced by: 68069662AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2015 Jeep Grand Cherokee | Laredo 2WD, Laredo 4WD, Laredo AWD, Laredo RWD, Limited 2WD, Limited 4WD, Overland 2WD, Overland 4WD, Overland AWD, Overland RWD, SRT AWD, SRT8 4WD, Summit AWD, Summit RWD | 6 Cyl 3.0L Diesel, 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.4L
View related parts
Jeep Grand Cherokee Suspension Absorber
Part Number: 68069677AE
$118.13 MSRP: $177.00
You Save: $58.87 (34%)
ADD TO CART
Product Specifications
- Other Name: Shock ABSORBER Kit Suspension Rear; Shock Absorber
- Replaces: 68069677AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2015 Jeep Grand Cherokee | Laredo 2WD, Laredo 4WD, Laredo AWD, Laredo RWD, Limited 2WD, Limited 4WD, Overland 2WD, Overland 4WD, Overland AWD, Overland RWD, SRT AWD, SRT8 4WD, Summit AWD, Summit RWD | 6 Cyl 3.0L Diesel, 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.4L
View related parts
Jeep Grand Cherokee Suspension Absorber
Part Number: 68298972AE
$715.00 MSRP: $1100.00
You Save: $385.00 (35%)
ADD TO CART
Product Specifications
- Other Name: ABSORBER-Suspension; Shock, Shock Absorber
- Position: Driver Side
- Replaces: 68298972AA, 68298972AB, 68298972AC, 68298972AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2021 Jeep Grand Cherokee | Laredo AWD, Laredo RWD, Limited AWD, Limited RWD, Overland AWD, Overland RWD, SRT AWD, Summit AWD, Summit RWD, Trackhawk AWD, Trailhawk AWD | 6 Cyl 3.0L Diesel, 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Jeep Grand Cherokee Suspension Absorber
Part Number: 68382338AA
$917.40 MSRP: $1420.00
You Save: $502.60 (36%)
ADD TO CART
Product Specifications
- Other Name: ABSORBER-Suspension; Shock Absorber
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2021 Jeep Grand Cherokee | Laredo AWD, Laredo RWD, Limited AWD, Limited RWD, Overland AWD, Overland RWD, SRT AWD, Summit AWD, Summit RWD, Trackhawk AWD, Trailhawk AWD | 6 Cyl 3.0L Diesel, 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Jeep Grand Cherokee Suspension Absorber
Part Number: 68298926AE
$708.40 MSRP: $1095.00
You Save: $386.60 (36%)
ADD TO CART
Product Specifications
- Other Name: ABSORBER-Suspension; Shock, Shock Absorber
- Position: Passenger Side
- Replaces: 68298926AC, 68298926AA, 68298926AB, 68298926AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2021 Jeep Grand Cherokee | Laredo AWD, Laredo RWD, Limited AWD, Limited RWD, Overland AWD, Overland RWD, SRT AWD, Summit AWD, Summit RWD, Trackhawk AWD, Trailhawk AWD | 6 Cyl 3.0L Diesel, 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Jeep Grand Cherokee Suspension Absorber
Part Number: 68084457AB
$184.50 MSRP: $275.00
You Save: $90.50 (33%)
ADD TO CART
Product Specifications
- Other Name: Shock ABSORBER Kit Suspension Front
- Replaced by: 68084457AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2012-2015 Jeep Grand Cherokee | Laredo 2WD, Laredo 4WD, Laredo AWD, Laredo RWD, Limited 2WD, Limited 4WD, Overland 2WD, Overland 4WD, Overland AWD, Overland RWD, SRT AWD, SRT8 4WD, Summit AWD, Summit RWD | 6 Cyl 3.0L Diesel, 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.4L
View related parts
Jeep Grand Cherokee Suspension Absorber
Part Number: 68382346AA
$618.20 MSRP: $948.00
You Save: $329.80 (35%)
ADD TO CART
Product Specifications
- Other Name: ABSORBER-Suspension
- Replaced by: 68382346AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018 Jeep Grand Cherokee | Laredo AWD, Laredo RWD, Limited AWD, Limited RWD, Overland AWD, Overland RWD, SRT AWD, Summit AWD, Summit RWD, Trackhawk AWD, Trailhawk AWD | 6 Cyl 3.0L Diesel, 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Jeep Grand Cherokee Suspension Absorber
Part Number: 68382346AB
$618.20 MSRP: $948.00
You Save: $329.80 (35%)
ADD TO CART
Product Specifications
- Other Name: ABSORBER-Suspension
- Replaced by: 68382346AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2019-2020 Jeep Grand Cherokee | Laredo AWD, Laredo RWD, Limited AWD, Limited RWD, Overland AWD, Overland RWD, SRT AWD, Summit AWD, Summit RWD, Trackhawk AWD, Trailhawk AWD | 6 Cyl 3.0L Diesel, 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L
View related parts
Jeep Grand Cherokee Suspension
Part Number: 68544611AG
$316.66 MSRP: $474.00
You Save: $157.34 (34%)
ADD TO CART
Product Specifications
- Other Name: Strut
- Replaces: 68544611AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022 Jeep Grand Cherokee | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.6 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Jeep Grand Cherokee Suspension Absorber
Part Number: 68298325AE
$161.30 MSRP: $239.00
You Save: $77.70 (33%)
Product Specifications
- Other Name: Strut; Shock Absorber
- Replaces: 68298325AD, 68298325AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2021 Jeep Grand Cherokee | Laredo AWD, Laredo RWD, Limited AWD, Limited RWD, Overland AWD, Overland RWD, SRT AWD, Summit AWD, Summit RWD, Trackhawk AWD, Trailhawk AWD | 6 Cyl 3.0L Diesel, 6 Cyl 3.6L, 8 Cyl 5.7L, 8 Cyl 6.2L, 8 Cyl 6.4L

| Page 1 of 8 |Next >

1-20 of 145 Results

Jeep Grand Cherokee Shock Absorber

The involved part which is known as the Shock Absorber is a fundamental part of Jeep Grand Cherokee cars as it regulates the bounce that a car can make over the undulations of the road such as a bump or a pothole. It functions by employing hydraulic or pneumatic systems of hydraulic dampers that are utilized for the control, absorption of kinetic energy so as to promote better ride comfort and control. Jeep Grand Cherokee has implemented different shock absorbers through the years, therefore, monotube also as twin tube. Monotube shocks in their structure have one cylinder for heat dispersion, twin-tube shocks have two cylinders with a simple design that can be booted with the help of gas. Worn out shock absorbers in the Jeep grand cherokee need replacement so as to provide improved handling as well as improve the riding quality for all passengers. These components are under a lot of stress of driving conditions and that is why it is critical to look for signs of failure, for example, excessive bounce or fluid leakage. In all, the Shock Absorber is very useful for making further adjustments to the Jeep Grand Cherokee and make the drive as relaxed and stable as possible.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Grand Cherokee Shock Absorber at great affordable prices. Moreover, all genuine Jeep Grand Cherokee Shock Absorber come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Jeep Grand Cherokee Shock Absorber Parts Questions & Experts Answers

Mount-Shock ABSORBER
5181844AA
Q: How to properly remove and install a shock absorber on Jeep Grand Cherokee?
A:
Raise the rear of the vehicle and support it securely on jackstands placed under the frame rails. For models with a solid rear axle, support the rear axle with a floor jack placed under the axle tube on the side being worked on, ensuring not to raise the axle but just support its weight. For models with Independent Rear Suspension, support the outer end of the Control Arm on the side being worked on with a jack, raising it just enough to support its weight. Remove the fastener(s) that secure the upper end of the shock absorber to the frame or body, applying penetrating oil if the fastener(s) won't loosen due to rust. It may be necessary to remove the two plastic fasteners for the rear fenderwell liner and pull it back to access the upper shock mounting fasteners. For models equipped with a shock solenoid/dampening assembly mounted on the shock absorber, disconnect the electrical connector before removing the absorber, noting how the canister is installed for proper reinstallation. Remove the nut and bolt that attach the lower end of the shock to the axle bracket, applying penetrating oil if the nut is frozen. Extend the new shock absorber as far as possible and install new rubber grommets into the shock absorber eyes if they are not already present. Installation is the reverse of removal, ensuring to tighten the shock absorber mounting fasteners to the specified torque.