My Garage
My Account
Cart
Genuine Jeep Liberty Hood Latch
Engine Hood Latch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Hood Latches found
Jeep Liberty Hood Latch
Hood Latch is an important component of Jeep Liberty automobiles which holds the hood tightly so that it does not open while the vehicle is in use. This component is located right under the front of the hood and that ensures that some of the most sensitive parts of the car such as the engine, the radiator, and the battery are well sheltered. Different Hood Latch types may have been used in the Jeep Liberty models in the course of the years, although those are not expounded. The primary mechanism stays of similar as it is to ensure reliability and safety of the hood in order to remain closed during driving. The Hood Latch of Jeep Liberty plays an important role of preserving the Company's vehicle parts and guaranteeing a safe road trip.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Liberty Hood Latch at great affordable prices. Moreover, all genuine Jeep Liberty Hood Latch come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Jeep Liberty Hood Latch Parts Questions & Experts Answers
- Q: How to remove the Hood Cable and Hood Latch on the Jeep Liberty?A:For models from 2002 to unscrew the Grille, and then to turn out screws from the center vertical latch bracket. A circle should be made around the latch and two nuts must be unscrewed and the cable disconnected and the latch should be pulled off. On the 2003 and on models, the grille support has three fasteners, and on the 2007 and earlier models, the grille support will require removal to reveal the latch assembly. Once more, draw a circle at the latch, unscrew the two nuts, cut the cable, and retire the latch. To access the diagonal of the cable, begin with the removal of the battery and the latch, then the Powertrain Control Module. Then, remove the left side scuff plate and kick panel; then use a screwdriver to loosen the hood release handle and then disconnect the cable by pushing down the two black clips on the cable end. Disconnect the cable at the engine compartment, free the clip on the cable and pass the grommet through the firewall and then pull in the cable from the inside of the vehicle. Reinstallation is done in the reverse manner to guaranty that the cable grommet sits in correctly in the firewall.
