My Garage
My Account
Cart
Genuine Jeep Patriot A/C Condenser
Air Conditioning Condenser- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
12 A/C Condensers found
Jeep Patriot Condenser And Transmission Cooler
Part Number: 68078975AA$433.20 MSRP: $634.00You Save: $200.80 (32%)
Jeep Patriot Condenser And Transmission Cooler
Part Number: 68004053AA$253.11 MSRP: $379.00You Save: $125.89 (34%)
Jeep Patriot Air Conditioning Condenser
Part Number: 68004296AA$285.44 MSRP: $428.00You Save: $142.56 (34%)
Jeep Patriot Air Conditioning Condenser
Part Number: 68093004AA$285.44 MSRP: $428.00You Save: $142.56 (34%)
Jeep Patriot Air Conditioning Condenser
Part Number: 68004052AA$215.45 MSRP: $318.00You Save: $102.55 (33%)
Jeep Patriot Air Conditioning Condenser
Part Number: 5191287AB$254.44 MSRP: $370.00You Save: $115.56 (32%)
Jeep Patriot Air Conditioning Condenser
Part Number: 2AMC3597AA$117.01 MSRP: $194.00You Save: $76.99 (40%)
Jeep Patriot Condenser And Transmission Cooler
Part Number: 68078975AB$433.20 MSRP: $634.00You Save: $200.80 (32%)Jeep Patriot Air Conditioning Condenser
Part Number: 68004052AB$215.45 MSRP: $318.00You Save: $102.55 (33%)
Jeep Patriot A/C Condenser
The A/C Condenser in Jeep Patriot vehicles play the role of heat exchanger which has the function of condensing the gaseous refrigerant as well as converting it to liquid state before proceeding to the accumulator. Usually located in front of the automobile radiator to receive air blown by the blower, the A/C Condenser usually uses a system of tubes to perform this cooling function. Compared to other car manufacturers, information on specific Jeep Patriot models and the styles of A/C Condensers used may have changed in the course of the years though variations are not specified. The function of the A/C Condenser does not fluctuates much in these models, it is to ensure that the AC system of the car operates correctly by maintaining the right temperatures of the refrigerant. In general, A/C Condenser is a vital part that helps to provide the comfort of the Jeep Patriot.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Patriot A/C Condenser at great affordable prices. Moreover, all genuine Jeep Patriot A/C Condenser come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Jeep Patriot A/C Condenser Parts Questions & Experts Answers
- Q: How to Replace the A/C Condenser on a Ford Focus on Jeep Patriot?A:When replacing entire components, additional refrigerant oil must be added equal to the amount that is removed with the component being replaced. Read the label on the oil container to verify that it is compatible with the R-134a system before adding any of it to the system. Note: if the condenser is being replaced because of damage (cracked or punctured), the receiver-drier should also be replaced. Removal: Have the system discharged and the refrigerant recovered by an air conditioning technician. Disconnect the cable from the negative terminal of the battery. Remove the bumper cover. On models equipped with a 6-speed automatic transaxle (6F24), remove the bolt retaining the transmission cooler line block to the left of the radiator. Also on models equipped with a 6-speed automatic transaxle (6F24), disconnect the transmission cooler lines from the condenser. Remove the retaining bolts and disconnect the refrigerant lines. Plug all open fittings to prevent entry of dirt and moisture. Remove the condenser upper mounting brackets. Remove the condenser lower mounting bolts. Carefully pull straight up to release the condenser from the lower clips, then remove the condenser from the vehicle. Installation: If you are replacing the condenser with a new unit, add 0.3-ounce (10 ml) of refrigerant oil to the replacement. Installation is the reverse of removal. Make certain to fully seat the condenser into the mounting clips and retainers. Install new O-rings onto the line fittings and lightly coat them with the proper refrigerant oil. Have the system evacuated, recharged and leak tested by the shop that discharged.
