My Garage
My Account
Cart
Genuine Jeep Patriot Door Lock Cylinder
Door Lock Cylinder Tumbler- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Door Lock Cylinders found
Jeep Patriot Door Lock Cylinder
The Door Lock Cylinder in Jeep Patriot cars is a major part included at the front door and is responsible for locking or unlocking of the car doors but with the help of car key. This mechanism guarantees high levels of security to the interior of the vehicle while at the same time not compromising on flexibility. If often operated, parts may wear and allow the doors to be either hard to lock or unlock and the key may become stiff and nonresponsive. In Jeep Patriot the door lock cylinders have been used throughout the model but the different models may have a slightly different cylinder style. Regardless of the style, the primary function remains the same: as well as for the purpose of safe entry and exit to be made as easy as possible. You should always ensure that you do regular service on the Door Lock Cylinder and ensure that you replace it as soon as it degrades in functionality to enhance excellent functionality and security of the Jeep Patriot.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Patriot Door Lock Cylinder at great affordable prices. Moreover, all genuine Jeep Patriot Door Lock Cylinder come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Jeep Patriot Door Lock Cylinder Parts Questions & Experts Answers
- Q: How to remove and replace the Door Handle, Door Latch Assembly, and Door Lock Cylinder on a Jeep Patriot?A:The door lock actuator is part of the door latch, and for an operating description and basic diagnostics, disconnect the cable from the negative terminal of the battery. Although not absolutely necessary, replacing the latch is easier when the main door panel has been removed first. Begin by removing the door switch assembly trim panel, and if easier access is needed, also remove the main door trim panel. Disconnect the latch electrical connector and separate the wiring harness from the retaining clip, then disconnect the latch rods from the latch by unsnapping and swiveling the colored plastic retainer off the rod before separating the rod from the retainer. Unscrew and remove the latch retaining bolts, then separate the inside latch plastic bracket from the door panel by unscrewing the Torx bolt, disengaging the hooks, and removing the door latch. Installation is the reverse of removal. For the outside handle, remove the door switch assembly trim panel and let it hang by the tether hooks. Disconnect the latch rods from the door handle and lock cylinder, then remove the handle bolts. Installation is the reverse of removal. The front door lock cylinder can be removed after taking off the outside door handle; with the handle removed, the lock cylinder slides out of the outside handle, and installation is the reverse of removal.
