My Garage
My Account
Cart
Genuine Jeep Patriot Sway Bar Kit
Stabilizer Sway Bar Set- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
9 Sway Bar Kits found
Jeep Patriot Sway Bar Kit
The Sway Bar Kit in Jeep Patriot vehicles play a very vital role in improving the stability of the car and handling when cornering or over an irregular surface. This anti-roll bar links opposite wheels through a torsion spring thus the roll stiffness is increased without affecting the spring stiffness. The Sway Bar Kit also resists torsion and, thus, keep the heights of the wheels similar, making a reduction of lateral tilt and improvement of the traction with the road possible. Different types of Sway Bar Kit has been installed on Jeep Patriot models throughout the years, which are adjustable or active Sway Bar Kit. Advanced systems can thus offer the potential of variable stiffness, somewhere in the region of optimal handling. It may be said that, although old-style Sway Bar Kits work to minimize body lean efficiently, they also tend to transmit impacts between wheels, this results in a comparatively less comfortable ride when driving over bumpy road surfaces. In general, it should be noted that the Sway Bar Kit is the dominant link that defines the handling balance of the Jeep Patriot and contributes to changes in its performance characteristics.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Patriot Sway Bar Kit at great affordable prices. Moreover, all genuine Jeep Patriot Sway Bar Kit come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Jeep Patriot Sway Bar Kit Parts Questions & Experts Answers
- Q: How to remove and install a front Sway Bar Bushing and Sway Bar Kit on a Jeep Patriot?A:Loosen the front wheel lug nuts, raise the front of the vehicle and support it securely on jackstands. Apply the parking brake and block the rear wheels to keep the vehicle from rolling off the stands. Remove the front wheels. Familiarize yourself with the components that make up the stabilizer. Note: To remove the link nut, hold the stud with an Allen wrench while turning the nut with a box-end wrench. Remove the under-vehicle splash shield. Remove the rear engine mount. Remove the front engine mount through-bolt. Remove the lower stabilizer link nut. Remove the two screws attaching the power steering hose clamps to the rear of the crossmember. Remove the heat shield. Remove the two bolts that secure the steering gear to the crossmember. Support the steering gear with a rope, bungee cord or wire to hold it in place as the crossmember is lowered. Mark the relationship of the main crossmember to the vehicle. Support the main crossmember with a floor jack, Remove the bolts and lower the crossmember far enough to allow for the Sway Bar Kit to be removed. Remove the Sway Bar bracket bolts and remove the brackets and the bushings. Remove the Sway Bar Kit. Installation: install the Sway Bar Kit, Sway Bar Bushing and brackets onto the crossmember, but do not tighten them yet. Center the Sway Bar Kit on the crossmember. Tighten the bracket bolts. Align the crossmember with the marks you made earlier and install the mounting bolts and screws. Install the engine mount and power steering line brackets/fasteners. Install the stabilizer links and tighten the nuts. Install the wheels and lug nuts. Lower the vehicle and tighten the wheel lug nuts.
