Mopar 5151813AB Rear Suspension Bar

Loosen the rear wheel lug nuts. Raise the rear of the vehicle and support it securely with jackstands. Remove the rear wheels. On models with balljoint-style Sway Bar links, remove the link-to Sway Bar nut and detach the link from the bar. If the ball stud turns, hold it with an Allen wrench. On models with insulator-type links, remove the nut, bolt and insulators. Remove the Sway Bar bushing bracket bolts. On all-wheel drive models, remove the rear differential and driveshaft in order to remove the Sway Bar Kit. Remove the bushing brackets and pull out the Sway Bar Kit. Installation is the reverse of removal. Tighten the fasteners to the torque. Install the wheel and lug nuts. Lower the vehicle and tighten the lug nuts to the torque.