My Garage
My Account
Cart
Genuine Jeep Patriot Washer Pump
Windshield Washer Pump- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Washer Pumps found
Jeep Patriot WSHR Pump-Windshield Washer
Part Number: 5179153AA$112.29 MSRP: $167.00You Save: $54.71 (33%)
Jeep Patriot Windshield Washer Pump
Part Number: 5179153AC$112.29 MSRP: $167.00You Save: $54.71 (33%)
Jeep Patriot Washer Pump
Jeep Patriot Washer Pump quickly pushes washer fluid from the reservoir to the windshield jets, letting drivers keep a clear view in rain or dust. The compact electric motor inside the Washer Pump spins an impeller that creates pressure, sending the liquid through hoses to the spray nozzles with a tap of the stalk switch. This direct motor driven Washer Pump action means the system reacts instantly, so every Jeep Patriot owner can sweep away grime before it becomes a hazard. Many Jeep systems share this simple setup. Across the production years, the Patriot line stayed with this straightforward electric Washer Pump layout, and published information does not list alternate styles, so shoppers mainly compare new versus rebuilt Washer Pump units rather than different designs. Replacement remains budget friendly, with reasonable part prices, while typical labor fees are relatively moderate, making restoration of full spray power simple for Jeep fans who want their Patriot vision sharp.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Patriot Washer Pump at great affordable prices. Moreover, all genuine Jeep Patriot Washer Pump come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Jeep Patriot Washer Pump Parts Questions & Experts Answers
- Q: How to disconnect and replace the front windshield washer pump and washer reservoir on Jeep Patriot?A:Disconnect the cable from the negative terminal of the battery. Properly siphon out or use a suction gun to remove as much fluid as possible from the windshield washer fluid reservoir; if the fluid is still in good condition, it can be reused. Remove the coolant reservoir mounting bolt, disengage the coolant reservoir from the windshield washer reservoir tab, and position the coolant reservoir out of the way, taking care not to spill any coolant. Remove the windshield washer reservoir mounting bolt. It may be easier to first disconnect the pump hose connections from the location nearest the strut tower, ensuring to label the hoses for correct reconnection. Lift the windshield washer reservoir enough to access the connections at the pump, disconnect the pump electrical connector, then label and disconnect the front and rear window fluid hose connections, using a towel or rag to soak up any residual fluid that may spill out. For models with an automatic Headlight leveling motor, remove the headlight housing mounting bolts and slide the housing forward enough to allow clearance for the washer reservoir to pass through. To replace the pump, disconnect the electrical connector and hoses at the pump if not already done, and lift the pump straight up to disconnect it from the reservoir inlet connection, taking care not to damage the reservoir. Remove the rubber seal or filter from the reservoir inlet and discard it, as a new one should be obtained for installation. Installation is the reverse of removal.
