My Garage
My Account
Cart
Genuine Jeep Patriot Wiper Motor
Windshield Wiper Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Wiper Motors found
Jeep Patriot Windshield Wiper Motor
Part Number: 4879432AH$219.38 MSRP: $329.00You Save: $109.62 (34%)
Jeep Patriot Wiper Motor
The Wiper Motor human purpose is to operate the windshield wiper system in Jeep Patriot by so that it can sweep the rain, snow or any other obstacle enhance the visibility. This is an electric motor whereby its operation can be adjusted to provide different speeds, which enable the driver to determine the rate of wiper movement depending on the weather condition. Jeep Patriot Wiper Motors can be of two types, new as well as refurbished products. New Wiper Motors are those that are purchased from the manufacturing company while the rebuilt ones are those wiper motors that have been used before they were assembled and restored to serving new standards. This variety is important to keep the Jeep Patriot owners' optimal interest in view while at the same time making Wiper Motor serve its purpose as intended.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Patriot Wiper Motor at great affordable prices. Moreover, all genuine Jeep Patriot Wiper Motor come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Jeep Patriot Wiper Motor Parts Questions & Experts Answers
- Q: How to remove and install wiper motors and arms on Jeep Patriot?A:To begin, place the wipers in the Park position and mark the location of the wiper arms before removing them. Disconnect the cable from the negative battery terminal. Pry off the protective caps covering the wiper arm nuts and remove the nuts that attach the wiper arms to their spindle shafts. If the wiper arms are difficult to remove, use a small two-jaw puller to loosen them and wiggle them free. Next, remove the cowl cover and disconnect the wiper motor electrical connector. Remove the mounting fasteners for the wiper transmission linkage assembly, disengage the grommet from the wiper motor, and take the assembly out from the cowl. Remove the motor mounting bolts to separate the wiper motor from the wiper transmission assembly, marking the location of the wiper motor shaft to the pivot arms for correct installation. Transfer the motor onto the linkage and securely tighten the fasteners. For installation, reverse the removal steps, ensuring to operate the wiper motor and linkage without the wiper arms attached to confirm correct operation before reinstalling the cowl cover. Return the wiper motor to the Park position, disconnect the negative battery cable, and continue with the installation. For the rear wiper, disconnect the cable from the negative battery terminal, lift the wiper arm/blade off the window, and remove the rear wiper arm similarly to the front. Remove the liftgate trim paneling, disconnect the electrical connector from the rear wiper motor, and take out the three bolts securing the wiper motor to the liftgate. Finally, installation is the reverse of removal.
