My Garage
My Account
Cart
Genuine Jeep Wagoneer Throttle Body
Fuel Injection Throttle Body- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Throttle Bodies found
Jeep Wagoneer Throttle Body
One of the major components of the Jeep Wagoneer vehicles is the Throttle Body whose main function is to control the amount of air that is allowed into the engine which determines the performance of the vehicle. Located between an air cleaner and intake manifold, this hardware is equipped with a butterfly valve that opens when the accelerator pedal is pressed, thus, providing more air to the engine. This action is accompanied by several sensors that interface with Powertrain Control Module (PCM) to provide necessary information on fuel injection variation. Throttle bodies used in Jeep Wagoneer models have changed from years which include the Throttle Body Injection common in the older models and advanced multi-port fuel injection systems. Improvements such as the Electronic Throttle Control (ETC) that has eliminated mechanical linkages between the accelerator pedal and the throttle, response and interaction with safety merchandises are whole better. Consequently, high-mileage Throttle Bodies of Jeep Wagoneer are generally quite commendable but may, occasionally, need cleaning or replacement for wear or build-up to guarantee the performance of the engine.
Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Wagoneer Throttle Body at great affordable prices. Moreover, all genuine Jeep Wagoneer Throttle Body come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.
Jeep Wagoneer Throttle Body Parts Questions & Experts Answers
- Q: How to remove and install a throttle body on Jeep Wagoneer?A:Detach the cable from the negative battery terminal. Detach the vacuum hoses from the throttle body upper bonnet, release the mounting clips and remove the upper bonnet. Remove the three mounting nuts and lift off the lower bonnet. Disconnect the ISA motor harness connector. Detach the fuel supply and return lines from the throttle body. Remove the accelerator cable and return spring. Detach the wire harness connector from the injector by compressing the lock tabs and lifting up. Identify and label the vacuum tubes at the back of the throttle body so you can install them in their original locations. Detach the vacuum tubes from the throttle body. Detach the TPS connector. Remove the throttle body mounting nuts and remove the throttle body. Remove any old gasket material or dirt from the mating surfaces of the intake. If you are replacing the throttle body assembly, remove the ISA motor and Throttle Position Sensor. Install them on the replacement throttle body and adjust them. Installation is the reverse of removal. Be sure to use a new gasket and lighten the mounting nuts to the specified torque.
