Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Contact Us Help Center
Make sure this part fits

Mopar 33003195 Throttle Body

1987-1990 Mopar 33003195

Customer Questions & Expert Answers (4)
33003195 Mopar Throttle Body
33003195 Mopar Throttle Body
  • Part Description
    Throttle-Body ; Body, Throttle
  • Manufacturer
    Mopar
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Specifications
  • Fitment
  • Q&A

  • 33003195 Throttle Body is Ref No. 5 in the diagram below

    1990 Jeep Cherokee Throttle Body Diagram for 33003195
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts

  • Product Specifications

    BrandGenuine Mopar
    Manufacturer Part Number33003195
    Part DescriptionThrottle-Body ; Body, Throttle
    Item Dimensions10.5 x 8.0 x 4.5 inches
    Item Weight2.80 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU33003195
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1987-1990 Jeep Cherokee6 Cyl 4.0L
    1987-1990 Jeep Comanche6 Cyl 4.0L
    1987-1990 Jeep Wagoneer6 Cyl 4.0L

  • Customer Questions & Expert Answers

    Q:
    I would like to check with you if this is the right part Posted by MoparPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 33003195 fits your vehicle.
    Posted by MoparPartsGiant Specialist
    Installation and Repair Tips
    Q:
    How to remove and install a throttle body on Jeep Comanche? Posted by Customer
    A:
    Detach the cable from the negative battery terminal. Detach the vacuum hoses from the throttle body upper bonnet, release the mounting clips and remove the upper bonnet. Remove the three mounting nuts and lift off the lower bonnet. Disconnect the ISA motor harness connector. Detach the fuel supply and return lines from the throttle body. Remove the accelerator cable and return spring. Detach the wire harness connector from the injector by compressing the lock tabs and lifting up. Identify and label the vacuum tubes at the back of the throttle body so you can install them in their original locations. Detach the vacuum tubes from the throttle body. Detach the TPS connector. Remove the throttle body mounting nuts and remove the throttle body. Remove any old gasket material or dirt from the mating surfaces of the intake. If you are replacing the throttle body assembly, remove the ISA motor and throttle position sensor. Install them on the replacement throttle body and adjust them. Installation is the reverse of removal. Be sure to use a new gasket and lighten the mounting nuts to the specified torque.
    Posted by MoparPartsGiant Specialist
    Q:
    How to remove and install a throttle body on Jeep Wagoneer? Posted by Customer
    A:
    Detach the cable from the negative battery terminal. Detach the vacuum hoses from the throttle body upper bonnet, release the mounting clips and remove the upper bonnet. Remove the three mounting nuts and lift off the lower bonnet. Disconnect the ISA motor harness connector. Detach the fuel supply and return lines from the throttle body. Remove the accelerator cable and return spring. Detach the wire harness connector from the injector by compressing the lock tabs and lifting up. Identify and label the vacuum tubes at the back of the throttle body so you can install them in their original locations. Detach the vacuum tubes from the throttle body. Detach the TPS connector. Remove the throttle body mounting nuts and remove the throttle body. Remove any old gasket material or dirt from the mating surfaces of the intake. If you are replacing the throttle body assembly, remove the ISA motor and throttle position sensor. Install them on the replacement throttle body and adjust them. Installation is the reverse of removal. Be sure to use a new gasket and lighten the mounting nuts to the specified torque.
    Posted by MoparPartsGiant Specialist
    Q:
    What should you do before removing the Throttle Body for the 1988 Jeep Cherokee? Posted by Customer
    A:
    Disconnect the ISA motor harness connector.- Detach the fuel supply and return lines from the throttle body.- Remove the accelerator cable and return spring.- Detach the wire harness connector from the injector.- Identify and label the vacuum tubes at the back of the throttle body.- Detach the vacuum tubes from the throttle body.- Detach the TPS connector.
    Posted by MoparPartsGiant Specialist
    See Complete Installation and Repair Tips

Genuine Mopar Part 33003195, the Right Choice

To ensure reliability, purchase Mopar part # 33003195 Throttle Body. It is sometimes referred to as Throttle Body. The OEM parts should be used when the Mopar owners want to maximize their driving experience. The high-tech factories that produce these parts utilize sophisticated technology specifically designed to meet stringent factory requirements. Additionally, they are thoroughly tested and can thus be used with reliability by Mopar owners. This part fits specific Jeep Cherokee, Comanche, and Wagoneer models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as 33003195 Throttle Body. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at attractive prices. Further, all parts come with a manufacturer's warranty. For detailed Jeep parts information, click here.

Why choose Mopar Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly