How to remove and install a front shock absorber on Jeep Wrangler?

Loosen the wheel lug nuts, raise the vehicle, and support it securely on jackstands while applying the parking brake, then remove the wheel. Detach the upper shock absorber stem by removing the upper nut, washer, and rubber grommet for models from 1987 to 1995, using an open-end wrench to prevent the stem from turning; if the nut is rusted, apply penetrating oil and allow it to soak, possibly using locking pliers to hold the stem. Next, remove the lower shock mounting nut and bolt to detach the lower end of the shock absorber from the axle, then pull the shock absorber out from the wheel well, taking off the washers and rubber grommets from the top. For installation, extend the new shock absorber fully, position a new washer and rubber grommet on the stem, and guide the shock into the upper mount, ensuring the grommets are centered by wiggling the stem before securely tightening the stem nut. Finally, install and tighten the lower mounting bolts and nuts securely.

Genuine Jeep Wrangler Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

181 Shock Absorbers found

View related parts
Jeep Wrangler Suspension
Part Number: 68527789AB
$37.22 MSRP: $53.25
You Save: $16.03 (31%)
ADD TO CART
Product Specifications
- Other Name: Shock, Shock Absorber
- Replaces: 68382855AA, 68527789AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2023 Jeep Wrangler | Unlimited Sahara 4WD, Unlimited Sport 4WD, Unlimited Sport RHD 4WD | 4 Cyl 2.0 L GAS, 4 Cyl 2.0L, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.6L
View related parts
Jeep Wrangler Suspension Absorber Kit
Part Number: 68047812AD
$121.50 MSRP: $180.00
You Save: $58.50 (33%)
ADD TO CART
Product Specifications
- Other Name: Shock ABSORBER Kit Suspension Front; Shock, Shock Absorber
- Replaces: 68047812AA, 68047812AC, 68029954AB, 68029955AB, 68047812AB, 68029954AC, 68029955AA, 68029955AC, 68029954AA, 68029954AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2018 Jeep Wrangler | 70th Anniversary, Rubicon, Rubicon 4WD, Sahara, Sahara 4WD, Sport, Sport 4WD, Unlimited Rubicon, Unlimited Rubicon 4WD, Unlimited Sahara 2WD, Unlimited Sahara 4WD, Unlimited Sport 2WD, Unlimited Sport 4WD, Unlimited X 2WD, Unlimited X 4WD, Unlimited X RHD 4WD, X, X RHD | 6 Cyl 3.6L, 6 Cyl 3.8L
View related parts
Jeep Wrangler Suspension Absorber Package
Part Number: 68382829AA
$151.88 MSRP: $225.00
You Save: $73.12 (33%)
ADD TO CART
Product Specifications
- Other Name: ABSBR Pkg-Suspension
- Replaced by: 68527781AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2019 Jeep Wrangler | Rubicon 4WD, Rubicon Unlimited 4WD, Sahara Unlimited 4WD, Sport 4WD, Sport Unlimited 4WD, Unlimited Rubicon 4WD, Unlimited Sahara 4WD, Unlimited Sport 4WD | 4 Cyl 2.0L, 6 Cyl 3.0L Diesel, 6 Cyl 3.6L
View related parts
Jeep Wrangler Suspension Absorber Package
Part Number: 68382853AA
$196.88 MSRP: $302.00
You Save: $105.12 (35%)
ADD TO CART
Product Specifications
- Other Name: ABSBR Pkg-Suspension
- Replaced by: 68527797AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2020 Jeep Wrangler | Unlimited Rubicon 4WD, Unlimited Sahara 4WD, Unlimited Sport 4WD | 4 Cyl 2.0L, 6 Cyl 3.6L
View related parts
Jeep Wrangler Suspension Absorber
Part Number: 52087835AB
$212.63 MSRP: $317.00
You Save: $104.37 (33%)
ADD TO CART
Product Specifications
- Other Name: Shock ABSORBER Suspension Rear; Shock, Shock Absorber
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2006 Jeep Wrangler | Rubicon, Sahara, SE, Sport, Unlimited, X | 4 Cyl 2.4L, 4 Cyl 2.5L, 6 Cyl 4.0L
View related parts
Jeep Wrangler Suspension Absorber Package
Part Number: 68527781AB
$151.88 MSRP: $225.00
You Save: $73.12 (33%)
ADD TO CART
Product Specifications
- Other Name: ABSBR Pkg-Suspension; Shock
- Replaces: 68382829AA, 68382829AB, 68527781AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2023 Jeep Wrangler | Unlimited Sahara 4WD, Unlimited Sport 4WD, Unlimited Sport RHD 4WD | 4 Cyl 2.0 L GAS, 4 Cyl 2.0L, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.6L
- 2018-2019 Jeep Wrangler | Rubicon 4WD, Rubicon Unlimited 4WD, Sahara Unlimited 4WD, Sport 4WD, Sport Unlimited 4WD, Unlimited Rubicon 4WD, Unlimited Sahara 4WD, Unlimited Sport 4WD | 4 Cyl 2.0L, 6 Cyl 3.0L Diesel, 6 Cyl 3.6L
View related parts
Jeep Wrangler Suspension Absorber Kit
Part Number: 68383632AB
$141.75 MSRP: $212.00
You Save: $70.25 (34%)
ADD TO CART
Product Specifications
- Other Name: ABSBR Kit-Suspension
- Replaced by: 68383632AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2021 Jeep Wrangler | Unlimited Rubicon 4WD, Unlimited Sahara 4WD, Unlimited Sport 4WD, Unlimited Sport RHD 4WD | 4 Cyl 2.0L, 6 Cyl 3.6L
View related parts
Jeep Wrangler Suspension Absorber Package
Part Number: 68382828AB
$150.10 MSRP: $226.00
You Save: $75.90 (34%)
ADD TO CART
Product Specifications
- Other Name: ABSBR Pkg-Suspension; Shock, Shock Absorber
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2022 Jeep Wrangler | Rubicon 4WD, Sport 4WD | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.0L, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.6L
View related parts
Jeep Wrangler Suspension
Part Number: 68608172AA
$47.65 MSRP: $69.00
You Save: $21.35 (31%)
ADD TO CART
Product Specifications
- Other Name: Shock
- Replaces: 68569369AA, 68569369AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2023 Jeep Wrangler | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.4 L GAS
View related parts
Jeep Wrangler Suspension Absorber Package
Part Number: 68067515AD
$66.53 MSRP: $147.00
You Save: $80.47 (55%)
ADD TO CART
Product Specifications
- Other Name: Shock ABSORBER Kit Suspension Rear
- Replaced by: 68067515AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2018 Jeep Wrangler | Unlimited Rubicon 4WD, Unlimited Sahara 4WD, Unlimited Sport 4WD | 6 Cyl 3.6L
View related parts
Jeep Wrangler Suspension Absorber Kit
Part Number: 68032197AA
$112.01 MSRP: $250.00
You Save: $137.99 (56%)
ADD TO CART
Product Specifications
- Other Name: Shock ABSORBER Kit Suspension Front
- Replaced by: 68003303AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Jeep Wrangler | Unlimited Sahara 2WD, Unlimited X 2WD | 6 Cyl 3.8L
View related parts
Jeep Wrangler Suspension Absorber Kit
Part Number: 68003303AE
$112.01 MSRP: $250.00
You Save: $137.99 (56%)
ADD TO CART
Product Specifications
- Other Name: Shock ABSORBER Kit Suspension Front
- Replaced by: 68003303AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Jeep Wrangler | Unlimited Sahara 2WD, Unlimited Sport 2WD, Unlimited X 2WD | 6 Cyl 3.8L
View related parts
Jeep Wrangler Suspension
Part Number: 68527964AB
$119.85 MSRP: $181.00
You Save: $61.15 (34%)
ADD TO CART
Product Specifications
- Other Name: Shock, Shock Absorber
- Replaces: 68527964AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2023 Jeep Wrangler | 6 Cyl 3.0 L DIESEL
View related parts
Jeep Wrangler Suspension Absorber Kit
Part Number: 68047812AA
$121.50 MSRP: $180.00
You Save: $58.50 (33%)
ADD TO CART
Product Specifications
- Other Name: Shock ABSORBER Kit Suspension Front
- Replaced by: 68047812AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2011 Jeep Wrangler | 70th Anniversary, Rubicon, Sahara, Sport, Unlimited Rubicon, Unlimited Sahara 4WD, Unlimited Sport 4WD, Unlimited X 4WD, Unlimited X RHD 4WD, X, X RHD | 6 Cyl 3.8L
View related parts
Jeep Wrangler Suspension Absorber Package
Part Number: 68307278AA
$121.50 MSRP: $183.00
You Save: $61.50 (34%)
ADD TO CART
Product Specifications
- Other Name: Shock ABSORBER Kit Suspension Rear
- Replaced by: 68307278AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2016-2018 Jeep Wrangler | Rubicon 4WD, Sahara 4WD, Sport 4WD, Unlimited Rubicon 4WD, Unlimited Sahara 4WD, Unlimited Sport 4WD | 6 Cyl 3.6L
View related parts
Jeep Wrangler Suspension
Part Number: 68527964AA
$80.89 MSRP: $181.00
You Save: $100.11 (56%)
ADD TO CART
Product Specifications
- Replaced by: 68527964AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2021 Jeep Wrangler | Rubicon 4WD, Sport 4WD, Unlimited Rubicon 4WD, Unlimited Sahara 4WD, Unlimited Sport 4WD | 6 Cyl 3.0L Diesel
View related parts
Jeep Wrangler Suspension
Part Number: 68382850AC
$126.58 MSRP: $190.00
You Save: $63.42 (34%)
ADD TO CART
Product Specifications
- Other Name: Shock Absorber
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022 Jeep Wrangler | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.4 L GAS
View related parts
Jeep Wrangler Suspension
Part Number: 68527966AA
$99.06 MSRP: $219.00
You Save: $119.94 (55%)
ADD TO CART
Product Specifications
- Replaced by: 68527966AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2021 Jeep Wrangler | Rubicon 4WD, Sport 4WD, Unlimited Rubicon 4WD, Unlimited Sahara 4WD, Unlimited Sport 4WD | 6 Cyl 3.0L Diesel
View related parts
Jeep Wrangler Suspension
Part Number: 68383632AC
$141.75 MSRP: $212.00
You Save: $70.25 (34%)
ADD TO CART
Product Specifications
- Other Name: Shock, Shock Absorber
- Replaces: 68383632AA, 68383632AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2022-2023 Jeep Wrangler | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV)
View related parts
Jeep Wrangler Suspension Shock Absorber Kit
Part Number: 68527797AB
$196.88 MSRP: $302.00
You Save: $105.12 (35%)
ADD TO CART
Product Specifications
- Other Name: Absorber-Suspension, Shock Absorber; Shock, Shock Absorber
- Replaces: 68382853AA, 68527797AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2023 Jeep Wrangler | Unlimited Rubicon 4WD, Unlimited Sahara 4WD, Unlimited Sport 4WD, Unlimited Sport RHD 4WD | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.0L, 6 Cyl 3.0 L DIESEL, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.6L, 8 Cyl 6.4 L GAS

| Page 1 of 10 |Next >

1-20 of 181 Results

Jeep Wrangler Shock Absorber

Jeep Wrangler has a part called the Shock Absorber which is part of the suspension system that is meant to reduce much bouncing and enhance the performance on bad roads. Thus, with the help of hydraulic systems which transform kinetic energy into heat, the Shock Absorber minimizes shock impulses and contributes to better control of vehicles. Since Jeep Wrangler models have been produced many years, different types of Shock Absorbers are applied, namely twin-tube and mono-tube. Twin-tube shocks can be used and are relatively simple in construction and can be gas charged for better longivity. However, mono-tube shocks are better in heat transfer and performance due to its capability to have multi-axial configuration. There are also sub options like the PSD( position sensitive damping) and the ASD( acceleration sensitive damping) that make the driving experience even splendid by customizing itself to certain conditions, and the newest technology used in the Jeep wrangler being the electrorheological and magnetorheological dampers which makes the driving semi active for better comfort and control.

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Jeep Wrangler Shock Absorber at great affordable prices. Moreover, all genuine Jeep Wrangler Shock Absorber come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Jeep Wrangler Shock Absorber Parts Questions & Experts Answers

Suspension Absorber Package
68047814AB
Q: How to remove and install a front shock absorber on Jeep Wrangler?
A:
Loosen the wheel lug nuts, raise the vehicle, and support it securely on jackstands while applying the parking brake, then remove the wheel. Detach the upper shock absorber stem by removing the upper nut, washer, and rubber grommet for models from 1987 to 1995, using an open-end wrench to prevent the stem from turning; if the nut is rusted, apply penetrating oil and allow it to soak, possibly using locking pliers to hold the stem. Next, remove the lower shock mounting nut and bolt to detach the lower end of the shock absorber from the axle, then pull the shock absorber out from the wheel well, taking off the washers and rubber grommets from the top. For installation, extend the new shock absorber fully, position a new washer and rubber grommet on the stem, and guide the shock into the upper mount, ensuring the grommets are centered by wiggling the stem before securely tightening the stem nut. Finally, install and tighten the lower mounting bolts and nuts securely.