How to remove and install the crankshaft pulley in 3.6L V6 engine on Ram 2500?

Disconnect the negative battery cable from the remote ground terminal. Remove the drivebelt. The crankshaft pulley bolt is incredibly tight; using a breaker bar, socket and special tool #10198 or equivalent, hold the pulley from turning while loosening the bolt. Pull the crankshaft pulley off the crankshaft. Apply clean engine oil or multi-purpose grease to the seal contact surface of the pulley hub. If it isn't lubricated, the seal lip could be damaged and oil leakage would result. Install the crankshaft pulley, aligning the keyway on the crankshaft with the slot in the pulley hub. Install the bolt and tighten it by hand. Prevent the engine from rotating then tighten the bolt to the torque. The remainder of installation is the reverse of removal.

Genuine Ram 2500 Crankshaft Pulley

Crankshaft Pulley Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Crankshaft Pulleys found

View related parts
Ram 2500 DAMPER-CRANKSHAFT
Part Number: 53022083AA
$381.70 MSRP: $583.00
You Save: $201.30 (35%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft; Crankshaft Damper, Vibration Damper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2023 Ram 2500 | Big Horn Crew Cab 2WD, Big Horn Crew Cab 4WD, Big Horn Mega Cab 4WD, Big Horn Reg Cab 2WD, Big Horn Reg Cab 4WD, Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, Limited Crew Cab 2WD, Limited Crew Cab 4WD, Limited Mega Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 2WD, Longhorn Mega Cab 4WD, Power Wagon Crew Cab 4WD, Powerwagon Crew Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, SLT Reg Cab 2WD, SLT Reg Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Reg Cab 2WD, ST Reg Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD, Tradesman Crew Cab 2WD, Tradesman Crew Cab 4WD, Tradesman Reg Cab 2WD, Tradesman Reg Cab 4WD | 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7L, 8 Cyl 5.7L CNG, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Ram 2500 DAMPER-CRANKSHAFT
Part Number: 68252443AA
$1463.00 MSRP: $2220.00
You Save: $757.00 (35%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft; Vibration Damper
- Replaces: 68206038AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2018 Ram 2500 | Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 2WD, Longhorn Mega Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, SLT Reg Cab 2WD, SLT Reg Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Reg Cab 2WD, ST Reg Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD | 6 Cyl 6.7L Diesel
View related parts
Ram 2500 DAMPER-CRANKSHAFT
Part Number: 4893285AA
$249.76 MSRP: $375.00
You Save: $125.24 (34%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft; Vibration Damper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014-2023 Ram 2500 | Big Horn Crew Cab 2WD, Big Horn Crew Cab 4WD, Big Horn Mega Cab 4WD, Big Horn Reg Cab 2WD, Big Horn Reg Cab 4WD, Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, Limited Crew Cab 2WD, Limited Crew Cab 4WD, Limited Mega Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 2WD, Longhorn Mega Cab 4WD, Power Wagon Crew Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, SLT Reg Cab 2WD, SLT Reg Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Reg Cab 2WD, ST Reg Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD, Tradesman Crew Cab 2WD, Tradesman Crew Cab 4WD, Tradesman Reg Cab 2WD, Tradesman Reg Cab 4WD | 6 Cyl 6.7 L DIESEL, 8 Cyl 6.4 L GAS, 8 Cyl 6.4L
View related parts
Ram 2500 DAMPER-CRANKSHAFT
Part Number: 68206038AB
$1463.00 MSRP: $2220.00
You Save: $757.00 (35%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft
- Replaced by: 68252443AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2014 Ram 2500 | Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 2WD, Longhorn Mega Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD | 6 Cyl 6.7L Diesel
View related parts
Ram 2500 DAMPER-CRANKSHAFT
Part Number: 68005166AA
$887.05 MSRP: $1320.00
You Save: $432.95 (33%)
ADD TO CART
Product Specifications
- Other Name: DAMPER Crankshaft
- Replaced by: 68143868AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ram 2500 | Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 2WD, Longhorn Mega Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD | 6 Cyl 6.7L Diesel
View related parts
Ram 2500 CRANKSHAFT
Part Number: 68447570AA
$417.24 MSRP: $610.00
You Save: $192.76 (32%)
Product Specifications
- Replaced by: 68538446AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2019-2020 Ram 2500 | Big Horn Crew Cab 2WD, Big Horn Crew Cab 4WD, Big Horn Mega Cab 4WD, Big Horn Reg Cab 2WD, Big Horn Reg Cab 4WD, Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Mega Cab 4WD, Limited Crew Cab 2WD, Limited Crew Cab 4WD, Limited Mega Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 4WD, Tradesman Crew Cab 2WD, Tradesman Crew Cab 4WD, Tradesman Reg Cab 2WD, Tradesman Reg Cab 4WD | 6 Cyl 6.7L Diesel
View related parts
Ram 2500 DAMPER-CRANKSHAFT
Part Number: 68538446AA
$417.24 MSRP: $610.00
You Save: $192.76 (32%)
Product Specifications
- Other Name: Vibration Damper
- Replaced by: 68538446AB
- Replaces: 68447570AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ram 2500 | 6 Cyl 6.7 L DIESEL, 8 Cyl 6.4 L GAS
View related parts
Ram 2500 DAMPER-CRANKSHAFT
Part Number: 68143868AA
Product Specifications
- Other Name: DAMPER Crankshaft; Vibration Damper
- Replaces: 68005166AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ram 2500 | Laramie Crew Cab 2WD, Laramie Crew Cab 4WD, Laramie Mega Cab 2WD, Laramie Mega Cab 4WD, Longhorn Crew Cab 2WD, Longhorn Crew Cab 4WD, Longhorn Mega Cab 2WD, Longhorn Mega Cab 4WD, SLT Crew Cab 2WD, SLT Crew Cab 4WD, SLT Mega Cab 2WD, SLT Mega Cab 4WD, SLT Regular Cab 2WD, SLT Regular Cab 4WD, ST Crew Cab 2WD, ST Crew Cab 4WD, ST Regular Cab 2WD, ST Regular Cab 4WD | 6 Cyl 6.7L Diesel

Ram 2500 Crankshaft Pulley

Looking for affordable and high-quality auto parts? Then you have already arrived at the proper online shop. We offer all Ram 2500 Crankshaft Pulley at great affordable prices. Moreover, all genuine Ram 2500 Crankshaft Pulley come with a manufacturer's warranty. In the long run, you would realize you have saved a lot of trouble and money with OEM parts from here.

Ram 2500 Crankshaft Pulley Parts Questions & Experts Answers

DAMPER-CRANKSHAFT
68252443AA
Q: How to remove and install the crankshaft pulley in 3.6L V6 engine on Ram 2500?
A:
Disconnect the negative battery cable from the remote ground terminal. Remove the drivebelt. The crankshaft pulley bolt is incredibly tight; using a breaker bar, socket and special tool #10198 or equivalent, hold the pulley from turning while loosening the bolt. Pull the crankshaft pulley off the crankshaft. Apply clean engine oil or multi-purpose grease to the seal contact surface of the pulley hub. If it isn't lubricated, the seal lip could be damaged and oil leakage would result. Install the crankshaft pulley, aligning the keyway on the crankshaft with the slot in the pulley hub. Install the bolt and tighten it by hand. Prevent the engine from rotating then tighten the bolt to the torque. The remainder of installation is the reverse of removal.

Related Ram 2500 Parts

Browse by Year

2023 Crankshaft Pulley 2022 Crankshaft Pulley 2021 Crankshaft Pulley 2020 Crankshaft Pulley 2019 Crankshaft Pulley 2018 Crankshaft Pulley 2017 Crankshaft Pulley 2016 Crankshaft Pulley 2015 Crankshaft Pulley 2014 Crankshaft Pulley 2013 Crankshaft Pulley 2012 Crankshaft Pulley 2011 Crankshaft Pulley