Make sure this part fits

Chrysler 5090033AA Ball Joint Control Arm

2012-2013 Chrysler 200 5090033AA

Customer Questions & Expert Answers (3)
5090033AA Mopar Ball Joint Control Arm Product Photo 1 of 4
  • Part Description
    Ball Joint Lower Control Arm
  • Position
    Lower
  • Replaced By
    5090033AB
  • Manufacturer
    Mopar
Make sure this part fits
$53.59 MSRP: $76.70
You Save: $23.11 (31%)
1
ADD TO CART
  • Related Parts
  • Specifications
  • Fitment
  • Q&A
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number5090033AA
    Part DescriptionBall Joint Control Arm; Ball Joint Lower Control Arm
    Item Dimensions3.2 x 5.0 x 5.4 inches
    Item Weight1.30 Pounds
    PositionLower
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerMopar
    SKU5090033AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2012-2013 Chrysler 2004 Cyl 2.4L, 6 Cyl 3.6LLimited Convertible, Limited Sedan, LX Convertible, LX Sedan, S Convertible, S Sedan, Touring Convertible, Touring Sedan
  • Customer Questions & Expert Answers

    Q:
    Please cross check for fit.
    A:
    You can Select Your Vehicle to check if 5090033AA fits your vehicle.
    Posted and answered by Mopar Parts Specialist Cristian
    Q:
    What steps should be followed to remove the Ball Joint for the 2013 Dodge Avenger? Posted by Ronie S.
    A:
    Loosen the wheel lug nuts and drive axle/hub nut. Raise the vehicle and support it securely on jackstands. Remove the wheel. Remove the brake caliper and disc. Remove the clip that holds the wheel speed sensor onto the knuckle. Remove the speed sensor bolt and pull the sensor up and out of the knuckle. Remove the ball joint-to-control arm nut. Separate the ball joint from the control arm using a ball joint separator tool. Carefully pull the knuckle outwards and off of the drive axle, being careful not to overextend the inner CV joint. If the splines stick in the hub, press the drive axle out with a puller. Support the drive axle with a length of wire or rope. Use a drift punch to knock the snap-ring off the ball joint. Using a ball joint press tool and the appropriate adapters, place the tools over the ball joint and proceed to tighten the press tool until the ball joint comes out of the knuckle. You can Select Your Vehicle to see complete installation and repair tips.
    Answered by Mopar Parts Specialist Alan / Jan 11, 2024
    Q:
    What is the purpose of the Ball Joint on the 2013 Chrysler 200? Posted by Yaw P.
    A:
    The ball joint is an integral part of the control arm and is not serviced separately. You can Select Your Vehicle to see complete installation and repair tips.
    Answered by Mopar Parts Specialist Stephen / May 07, 2026

Genuine Mopar Part 5090033AA, the Right Choice

To ensure reliability, purchase Mopar part # 5090033AA Ball Joint Control Arm. It is sometimes referred to as Ball Joint. The OEM parts should be used when the Mopar owners want to maximize their driving experience. The high-tech factories that produce these parts utilize sophisticated technology specifically designed to meet stringent factory requirements. Additionally, they are thoroughly tested and can thus be used with reliability by Mopar owners. This part fits specific Chrysler 200 models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as 5090033AA Ball Joint Control Arm. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at attractive prices. Further, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.
Shop MoparPartsGiant.com for dedicated service, prompt delivery, and low prices on genuine parts from real OE dealerships.