Make sure this part fits

Chrysler 5179511AA Ignition Cylinder

2007-2014 Chrysler 5179511AA

Customer Questions & Expert Answers (2)
5179511AA Mopar Ignition Cylinder Product Photo 1 of 4
  • Part Description
    Cylinder - Ignition Lock
  • Manufacturer
    Mopar
Make sure this part fits
$79.99 MSRP: $119.00
You Save: $39.01 (33%)
1
ADD TO CART
  • Related Parts
  • Specifications
  • Fitment
  • Q&A
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part Number5179511AA
    Part DescriptionIgnition Cylinder; Cylinder - Ignition Lock
    Item Dimensions5.6 x 4.2 x 0.8 inches
    Item Weight0.60 Pounds
    ConditionNew
    ManufacturerMopar
    SKU5179511AA
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2011-2014 Chrysler 2004 Cyl 2.4L, 6 Cyl 3.6LLimited Convertible, Limited Sedan, LX Convertible, LX Sedan, S Convertible, S Sedan, Touring Convertible, Touring Sedan
    2007-2010 Chrysler Sebring4 Cyl 2.4L, 6 Cyl 2.7L, 6 Cyl 3.5LLimited Convertible, Limited Sedan, LX Convertible, LX Sedan, Touring Convertible, Touring Sedan
  • Customer Questions & Expert Answers

    Q:
    Please cross check for fit.
    A:
    You can Select Your Vehicle to check if 5179511AA fits your vehicle.
    Posted and answered by Mopar Parts Specialist Cristian
    Q:
    How to diagnose, adjust, and replace the Ignition Lock Cylinder and ignition switch on the Dodge Nitro? Posted by Brix S.
    A:
    If the key is stiff to turn the problem might not be with the switch or Ignition Lock Cylinder but it might just be a problem with the key itself. If an automobile has an automatic transmission and the shifter is the floor console-mounted shifter the Park/Lock cable may need to be adjusted and if so is possible. In the NEC steel column, this cable is faulty within the steering related to it then the whole column has to be replaced. For the manual transmission cars, the small button located right behind the Ignition Lock Cylinder may be damaged, for which the steering column will have to be replaced. To retain the Ignition Lock Cylinder, the key should be inserted, shifter triggered to the Park in case of the automatic cars and then the steering column covers, the keyless entry module, and the circular ring around the Ignition Lock Cylinder are to be removed. Rotate the key anti-clockwise to bring the switch into the 'on' position and then use a small punch or any other tool in shape of a punch to change the position of the switch by inserting the tool through the hole at the bottom of the switch while turning the key to outside. The key could be removed as the cylinder was slided out. For a new cylinder, there is an insertion of the key, moving back to the 'on' position, correct positioning of the key inside of the required housing and finally, sliding it until it settles into the right position. Finally, turn the key to the Lock position and perform the reverse of the instructions mentioned above in order to install the lock. When replacing the ignition switch you have to take out the Ignition Lock Cylinder, then the mul-function switch and then remove wiring. A Torx screwdriver for the purpose is to be used to unscrew the switch and when it is done, the switch is to be removed by pulling it in a line with the top end of the terminal. During installation, one will have to switch them on before proceeding to twist and finally reverse the procedure followed in removing it.
    You can Select Your Vehicle to see complete installation and repair tips.
    Answered by Mopar Parts Specialist Joel / May 10, 2025

Genuine Mopar Part 5179511AA, the Right Choice

To ensure reliability, purchase Mopar part # 5179511AA Ignition Cylinder. It is sometimes referred to as Ignition Lock Assembly, Ignition Lock Cylinder. The OEM parts should be used when the Mopar owners want to maximize their driving experience. The high-tech factories that produce these parts utilize sophisticated technology specifically designed to meet stringent factory requirements. Additionally, they are thoroughly tested and can thus be used with reliability by Mopar owners. This part fits specific Chrysler 200 and Sebring models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as 5179511AA Ignition Cylinder. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at attractive prices. Further, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.
Shop MoparPartsGiant.com for dedicated service, prompt delivery, and low prices on genuine parts from real OE dealerships.