Make sure this part fits

Chrysler MD104925 Ring Set

1988-1992 Chrysler MD104925

Customer Questions & Expert Answers (2)
MD104925 Mopar Ring Set Illustration 1 of 1
  • Part Description
    V6-Piston (O/Size 0.75)
  • Manufacturer
    Mopar
Make sure this part fits
$65.93 MSRP: $97.45
You Save: $31.52 (33%)
1
ADD TO CART
  • Related Parts
  • Specifications
  • Fitment
  • Q&A
  • Product Specifications

    BrandGenuine Chrysler
    Manufacturer Part NumberMD104925
    Part DescriptionRing Set; V6-Piston (O/Size 0.75)
    Item Dimensions4.3 x 4.1 x 4.1 inches
    Item Weight0.80 Pounds
    ConditionNew
    ManufacturerMopar
    SKUMD104925
    WarrantyThis genuine Mopar part is guaranteed by Mopar's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1991-1992 Chrysler Imperial6 Cyl 3.0L
    1990-1992 Chrysler LeBaron6 Cyl 3.0L2 Door Convertible, 2 Door Sedan, Base, Landau, LX, LX (2 Door Convertible), LX (2 Door Sedan)
    1988-1992 Chrysler New Yorker6 Cyl 3.0LFifth Avenue
    1990-1991 Chrysler TC Maserati6 Cyl 3.0L
    1990-1992 Chrysler Town & Country6 Cyl 3.0L
  • Customer Questions & Expert Answers

    Q:
    Is this part guaranteed to fit my truck?
    A:
    You can Select Your Vehicle to check if MD104925 fits your vehicle.
    Posted and answered by Mopar Parts Specialist Reggie
    Q:
    How to Check and Correct Piston Ring Set End Gaps Before Installation on Chrysler Imperial? Posted by Solange B.
    A:
    Before installing the new piston rings, the ring end gaps must be checked, assuming the piston ring side clearance has been verified correct. Lay out the piston/connecting rod assemblies and the new ring sets to match them with the same piston and cylinder during the end gap measurement and engine assembly. Insert the top ring into the first cylinder, ensuring it is square with the cylinder walls by pushing it in with the top of the piston, positioning the ring near the bottom of the cylinder. To measure the end gap, use feeler gauges between the ends of the ring until a gauge equal to the gap width is found, ensuring the feeler gauge slides with slight drag. If the gap is too small, it must be enlarged to prevent the ring ends from contacting each other during engine operation, which can cause serious damage; this can be done by carefully filing the ring ends from the outside in. Excess end gap isn't critical unless it exceeds 0.040-inch, so double-check to ensure the correct rings are being used. Repeat the procedure for each ring in the first cylinder and the remaining cylinders, keeping rings, pistons, and cylinders matched. Once the ring end gaps have been checked and corrected, install the rings on the pistons, starting with the oil control ring, which consists of three components. Slip the spacer/expander into the groove, ensuring any anti-rotation tang is inserted into the drilled hole in the ring groove. Install the lower side rail by placing one end into the groove and pushing it in with a finger, then do the same for the upper side rail. After installing the three oil ring components, check that both side rails can turn smoothly in the groove. Next, install the middle ring, ensuring the identification mark faces up, and use a piston ring installation tool to slide it into the middle groove without expanding it more than necessary. Finally, install the top ring in the same manner, ensuring the mark is facing up, and repeat the procedure for the remaining pistons and rings.
    You can Select Your Vehicle to see complete installation and repair tips.
    Answered by Mopar Parts Specialist Jay / Feb 01, 2026

Genuine Mopar Part MD104925, the Right Choice

To ensure reliability, purchase Mopar part # MD104925 Ring Set. It is sometimes referred to as Piston Ring Set. The OEM parts should be used when the Mopar owners want to maximize their driving experience. The high-tech factories that produce these parts utilize sophisticated technology specifically designed to meet stringent factory requirements. Additionally, they are thoroughly tested and can thus be used with reliability by Mopar owners. This part fits specific Chrysler Imperial, LeBaron, and Town & Country models.

MoparPartsGiant.com is a leading supplier of genuine Mopar parts and accessories such as MD104925 Ring Set. Wondering where to find exceptional quality and affordable OEM Mopar parts? You have already come to the right place. Our website boasts a huge selection of genuine Mopar parts at attractive prices. Further, all parts come with a manufacturer's warranty. For detailed Chrysler parts information, click here.
Shop MoparPartsGiant.com for dedicated service, prompt delivery, and low prices on genuine parts from real OE dealerships.